Results for igt@kms_pm_rpm@basic-rte

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 2.97 seconds
Igt-Version
IGT-Version: 2.2-g005281c52 (x86_64) (Linux: 6.18.0-CI_DRM_17610-g3b52d4782323+ x86_64)
Out
Using IGT_SRANDOM=1764579443 for randomisation
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff888108fd5818 has 1/1 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x64/0x220 [i915]
     i915_display_rpm_get_raw+0x17/0x30 [i915]
     intel_display_rpm_get_raw+0x20/0x30 [i915]
     __intel_display_power_put_async+0x3a/0x1c0 [i915]
     intel_atomic_commit_tail+0x1349/0x1c40 [i915]
     intel_atomic_commit+0x2e8/0x330 [i915]
     drm_atomic_commit+0xaf/0xf0
     drm_atomic_helper_set_config+0x82/0xd0
     drm_mode_setcrtc+0x407/0xa10
     drm_ioctl_kernel+0xb3/0x120
     drm_ioctl+0x2d4/0x5a0
     __x64_sys_ioctl+0xa5/0x100
     x64_sys_call+0x1144/0x26a0
     do_syscall_64+0x93/0xd60
     entry_SYSCALL_64_after_hwframe+0x76/0x7e
Subtest basic-rte: SUCCESS (2.969s)
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 3
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff888108fd5818 has 1/3 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x64/0x220 [i915]
     i915_display_rpm_get_raw+0x17/0x30 [i915]
     intel_display_rpm_get_raw+0x20/0x30 [i915]
     __intel_display_power_put_async+0x3a/0x1c0 [i915]
     intel_atomic_commit_tail+0x1349/0x1c40 [i915]
     intel_atomic_commit+0x2e8/0x330 [i915]
     drm_atomic_commit+0xaf/0xf0
     drm_atomic_helper_set_config+0x82/0xd0
     drm_mode_setcrtc+0x407/0xa10
     drm_ioctl_kernel+0xb3/0x120
     drm_ioctl+0x2d4/0x5a0
     __x64_sys_ioctl+0xa5/0x100
     x64_sys_call+0x1144/0x26a0
     do_syscall_64+0x93/0xd60
     entry_SYSCALL_64_after_hwframe+0x76/0x7e

ref_tracker: intel_runtime_pm@ffff888108fd5818 has 2/3 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x64/0x220 [i915]
     i915_display_rpm_get+0x1a/0x30 [i915]
     intel_display_rpm_get+0x1f/0x30 [i915]
     intel_display_power_get+0x22/0x70 [i915]
     adlp_tc_phy_connect+0x166/0x2b0 [i915]
     intel_tc_port_reset_mode+0x285/0x3c0 [i915]
     __intel_tc_port_lock+0xe5/0x130 [i915]
     intel_tc_port_lock+0x1a/0x30 [i915]
     intel_digital_port_connected+0x33/0xa0 [i915]
     intel_dp_detect+0xfe/0x7b0 [i915]
     detect_connector_status+0x21/0x60
     drm_helper_probe_detect_ctx+0x75/0xe0
     drm_helper_probe_detect+0x7b/0x90
     intel_hotplug_detect_connector+0x4b/0x140 [i915]
     i915_hpd_poll_init_work+0x20b/0x2e0 [i915]
Err
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (2.969s)
Dmesg
<6> [246.244692] Console: switching to colour dummy device 80x25
<6> [246.245416] [IGT] kms_pm_rpm: executing
<6> [246.248534] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [246.248852] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [246.255288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1]
<7> [246.255300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<7> [246.259600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1] disconnected
<7> [246.259957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1]
<7> [246.259962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [246.260314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1] disconnected
<7> [246.260697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2]
<7> [246.260705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [246.261047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2] disconnected
<7> [246.261522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1]
<7> [246.261528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:208:eDP-1]
<7> [246.262217] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.262656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [246.262852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [246.263047] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [246.263299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [246.263308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [246.263311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD monitor
<7> [246.263314] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD size 20, SAD count 0
<7> [246.263334] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] VRR capable: no
<7> [246.263541] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.263740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.264562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] probed modes:
<7> [246.264571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [246.264576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [246.264609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1]
<7> [246.264615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<7> [246.268919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1] disconnected
<7> [246.268953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1]
<7> [246.268958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [246.269320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1] disconnected
<7> [246.269350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2]
<7> [246.269356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [246.269814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2] disconnected
<7> [246.269865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1]
<7> [246.269872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:208:eDP-1]
<7> [246.270661] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.271170] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [246.271447] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [246.271745] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [246.272115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [246.272126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [246.272131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD monitor
<7> [246.272135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD size 20, SAD count 0
<7> [246.272160] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] VRR capable: no
<7> [246.272466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.272688] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:208:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.273657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] probed modes:
<7> [246.273668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [246.273675] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [246.273780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1]
<7> [246.273787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<7> [246.278288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:HDMI-A-1] disconnected
<7> [246.278355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1]
<7> [246.278360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [246.278686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-1] disconnected
<7> [246.278732] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2]
<7> [246.278737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [246.279039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:235:DP-2] disconnected
<7> [246.279661] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:242]
<7> [247.287345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [247.288383] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [247.288369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [247.289360] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [247.312868] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]
<7> [247.313296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [247.314269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [247.315122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [247.315864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [247.316572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [247.317241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [247.317827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [247.318463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [247.319029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [247.319568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [247.320082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [247.320568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [247.321119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [247.321634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [247.322155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [247.322656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [247.323148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [247.323652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [247.324171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [247.324676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [247.325182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [247.325673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [247.326173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [247.326688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [247.327211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [247.327716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [247.328216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [247.328724] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [247.329255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [247.329767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [247.330294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [247.330791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [247.331285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [247.331792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [247.332312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [247.332808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [247.333308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [247.333802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [247.334322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [247.334818] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [247.335332] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0
<7> [247.335914] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [247.336423] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [247.336972] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [247.337455] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [247.337915] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [247.338368] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [247.338837] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [247.339319] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [247.339835] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0
<7> [247.340345] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [247.340838] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [247.341228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [247.341623] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [247.341960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [247.342294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [247.342652] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [247.342955] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [247.343354] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [247.343869] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [247.344363] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [247.344817] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [247.345301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset]
<7> [247.345729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [247.346071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [247.346540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [247.346997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [247.347482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [247.347930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [247.348487] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [247.349819] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [247.559351] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:208:eDP-1] set backlight PWM = 0
<7> [247.560365] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [247.566670] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power off
<7> [247.567264] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [247.567779] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - short
<7> [247.568407] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [247.568914] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [247.623610] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [247.624416] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - long
<7> [247.625093] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [247.630148] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [247.630673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [247.631279] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [247.631281] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]
<7> [247.631829] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [247.631897] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [247.632632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [247.633217] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [247.633818] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [247.634343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI A/PHY A]
<7> [247.634891] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:216:DDI B/PHY B]
<7> [247.635410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DDI TC1/PHY TC1]
<7> [247.635887] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:227:DP-MST A]
<7> [247.636365] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:228:DP-MST B]
<7> [247.636836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:229:DP-MST C]
<7> [247.637335] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:234:DDI TC2/PHY TC2]
<7> [247.637817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:236:DP-MST A]
<7> [247.638316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST B]
<7> [247.638788] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST C]
<7> [247.639277] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:208:eDP-1]
<7> [247.640111] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [247.640601] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [247.641097] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [247.641719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [247.642347] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]
<7> [247.643459] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]
<7> [247.643888] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]
<7> [247.662444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [247.663244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [247.663846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [247.664760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [247.665444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [247.667995] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [247.669244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [247.670244] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [247.671539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [247.672198] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [247.672707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [247.673283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [247.746973] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]
<7> [247.759270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [247.759792] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [247.760618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [247.761485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [247.762295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [247.762992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [247.763667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [247.764334] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [247.764863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [247.766178] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [247.770453] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [247.770923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [247.775050] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [247.775851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [247.776298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [247.776817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [247.777564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [247.778559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<7> [247.779140] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]
<7> [247.783138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [247.783607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [247.783978] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [247.784326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [247.785277] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [247.786125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [247.786860] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [247.788602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [247.789129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [247.789903] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]
<7> [247.808435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [247.809303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [247.809930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [248.823292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [248.824426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [248.825646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [248.826772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [248.827812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [248.828139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [248.828352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [248.828883] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [248.828895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [248.829391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [248.829992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [248.830225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [248.830453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [248.830667] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [248.830871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [248.831404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [248.831629] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [248.831828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [248.832659] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [248.833332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [248.833882] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [248.834217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [248.834525] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [248.834731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [248.834965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [248.894540] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]
<7> [248.894694] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:208:eDP-1]
<7> [248.895187] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:208:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [248.896198] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:207:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [248.896892] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 2019750 available 2160000
<7> [248.897596] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [248.898308] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:207:DDI A/PHY A] [CRTC:89:pipe A]
<7> [248.898839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [248.899425] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [248.899652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [248.899875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [248.900110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [248.900340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [248.900560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [248.900767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [248.900973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [248.901212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [248.901445] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [248.901666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [248.901889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [248.902124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [248.902350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [248.902570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [248.902808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [248.903060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [248.903297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [248.903525] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [248.903746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [248.903953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [248.904178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [248.904409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [248.904644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [248.904884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [248.905137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [248.905366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [248.905579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [248.905796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [248.906036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [248.906269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [248.906487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [248.906710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [248.906915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [248.907137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [248.907367] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [248.907677] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [248.907900] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [248.908162] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [248.908375] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [248.908565] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [248.908756] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [248.908957] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [248.909182] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [248.909434] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 2154400 num active planes 1
<7> [248.909669] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [248.909901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [248.910128] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [248.910352] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [248.910573] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [248.910807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [248.911055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [248.911297] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [248.911546] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [248.911787] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [248.912021] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [248.912257] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [248.912486] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0
<7> [248.912710] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0
<7> [248.912960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset]
<7> [248.913206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [248.913440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [248.913660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [248.913896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [248.914155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [248.914385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [248.914604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [248.914814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [248.915028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [248.915248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [248.915476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [248.915712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [248.915950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [248.916198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [248.916432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [248.916653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [248.916888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [248.917135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [248.917363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [248.917585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [248.917793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [248.917996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [248.918228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [248.918469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [248.918691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [248.918914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [248.919152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [248.919374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [248.919592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600, min cdclk 269300
<7> [248.919804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [248.920035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [248.920263] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [248.920479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [248.920694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [248.920898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [248.921112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [248.921328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [248.921531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.921733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.921935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.922148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [248.922360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [248.922562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.922764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.922965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [248.923179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [248.923396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [248.923619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:242] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [248.923848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [248.924076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [248.924305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [248.924521] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [248.924724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [248.924927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [248.925150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [248.937139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [248.937323] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [248.937543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [248.937779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [248.938073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [248.938363] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [248.938806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [248.939263] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [248.939621] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [248.939912] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [248.942622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [248.942837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [248.946406] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [248.946899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [248.947090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [248.950232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [248.950596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [248.950868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [248.951097] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [248.951423] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [248.951911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI A/PHY A]
<7> [248.952348] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:216:DDI B/PHY B]
<7> [248.952737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DDI TC1/PHY TC1]
<7> [248.952948] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:227:DP-MST A]
<7> [248.953155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:228:DP-MST B]
<7> [248.953421] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:229:DP-MST C]
<7> [248.953806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:234:DDI TC2/PHY TC2]
<7> [248.954208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:236:DP-MST A]
<7> [248.954600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST B]
<7> [248.954942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST C]
<7> [248.955275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [248.955734] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [248.956143] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [248.956596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [248.957037] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]
<7> [248.957259] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [248.957692] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power on
<7> [248.958119] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [248.958594] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [248.968157] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [248.968632] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power on
<7> [248.968933] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [249.030966] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [249.031856] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - long
<7> [249.032603] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [249.033400] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [249.179766] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [249.180832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [249.182047] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turning VDD on
<7> [249.182806] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [249.185454] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [249.185528] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [249.186503] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [249.187931] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [249.188393] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [249.189260] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Clock recovery OK
<7> [249.189451] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [249.190778] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [249.191321] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [249.192312] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [249.193111] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [249.193545] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [249.194019] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:208:eDP-1] Performing OUI wait (0 ms)
<7> [249.194881] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:208:eDP-1] set backlight PWM = 6844
<7> [249.210262] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [249.213183] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:208:eDP-1]
<7> [249.214122] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]
<7> [249.216444] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<6> [249.218650] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [249.219057] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]
<7> [249.221111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [249.221860] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [249.222666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [249.223387] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [249.224396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [249.224937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [249.225500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [249.226025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [249.226528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [249.227039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [249.227553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [249.228077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [249.228587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [249.229115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [249.229608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [249.230128] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [249.230639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [249.231147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [249.231654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [249.232164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [249.232664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [249.233197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [249.233715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [249.234226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [249.234718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [249.235225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [249.235735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [249.236261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [249.236762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [249.237268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [249.237772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [249.238300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [249.238810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [249.239325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [249.239834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [249.240318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [249.240820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [249.241348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [249.241867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [249.242378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [249.242872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [249.243396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [249.243906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [249.244421] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [249.244919] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0
<7> [249.245473] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [249.245946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [249.246511] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [249.246977] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [249.247448] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [249.247896] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [249.248325] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [249.248797] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [249.249344] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0
<7> [249.249843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [249.250322] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [249.250789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [249.251081] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [249.251466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [249.251717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [249.251958] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [249.252227] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [249.252745] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [249.253049] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [249.253492] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [249.253957] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [249.254468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset]
<7> [249.254956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [249.255426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [249.255887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [249.256291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [249.256673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [249.257155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [249.257815] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [249.277470] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [249.479293] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:208:eDP-1] set backlight PWM = 0
<7> [249.480350] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [249.494643] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power off
<7> [249.494925] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [249.495402] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [249.495605] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - short
<7> [249.496062] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [249.550628] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [249.551509] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - long
<7> [249.552259] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [249.557063] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [249.557587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [249.558170] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [249.558173] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]
<7> [249.558678] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [249.558749] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [249.559296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [249.559849] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [249.560487] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [249.561012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI A/PHY A]
<7> [249.561543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:216:DDI B/PHY B]
<7> [249.562052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DDI TC1/PHY TC1]
<7> [249.562533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:227:DP-MST A]
<7> [249.563017] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:228:DP-MST B]
<7> [249.563483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:229:DP-MST C]
<7> [249.563956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:234:DDI TC2/PHY TC2]
<7> [249.564451] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:236:DP-MST A]
<7> [249.564932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST B]
<7> [249.565448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST C]
<7> [249.565912] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:208:eDP-1]
<7> [249.566731] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [249.567233] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [249.567702] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [249.568331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [249.568938] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]
<7> [249.570074] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]
<7> [249.570499] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]
<7> [249.588217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [249.588928] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [249.589657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [250.231383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [250.232521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [250.233755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [250.235027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [250.235806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [250.236534] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [250.236868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [250.237401] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [250.237407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [250.237911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [250.238510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [250.238739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [250.238954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [250.239174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [250.239385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [250.239907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.240130] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [250.240339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [250.241177] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [250.241828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [250.242389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [250.242703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [250.243013] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [250.243223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [250.243457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [250.282131] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:208:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [250.282844] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:207:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [250.283425] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 2019750 available 2160000
<7> [250.284004] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [250.284570] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:207:DDI A/PHY A] [CRTC:89:pipe A]
<7> [250.285060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [250.285559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [250.286071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [250.286534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [250.287003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [250.287474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [250.287937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [250.288715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [250.289222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [250.289737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [250.290281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [250.290787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [250.291481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [250.292001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [250.292516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [250.293115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [250.293624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [250.294145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [250.294648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [250.295190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [250.295715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [250.296270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [250.296765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [250.297236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [250.297742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [250.298297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [250.298807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [250.299319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [250.299801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [250.300329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [250.300849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [250.301373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [250.301893] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [250.302413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [250.302918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [250.303456] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [250.303991] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [250.304647] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [250.305009] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [250.305330] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [250.305795] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [250.306299] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [250.306770] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [250.307252] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [250.307696] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [250.308193] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 2154400 num active planes 1
<7> [250.308707] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [250.309228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [250.309729] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [250.310247] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [250.310706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [250.311057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [250.311566] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [250.312092] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [250.312648] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [250.312981] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [250.313220] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [250.313583] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [250.314088] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0
<7> [250.314556] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0
<7> [250.314992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset]
<7> [250.315217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [250.315632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [250.316133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [250.316605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [250.317060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [250.317468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [250.317910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [250.318406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [250.318878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [250.319366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [250.319779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [250.320271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [250.320746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [250.321224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [250.321695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [250.322048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [250.322264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [250.322473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [250.322677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [250.322881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [250.323094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [250.323339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [250.323559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [250.323764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [250.323969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [250.324184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [250.324443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [250.324688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [250.325046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600, min cdclk 269300
<7> [250.325453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [250.325836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [250.326240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [250.326629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [250.326841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [250.327068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [250.327318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [250.327672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [250.328044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.328401] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.328699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.328902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [250.329138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [250.329411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.329732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.330064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [250.330385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [250.330609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [250.330825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:209] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [250.331128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [250.331430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [250.331727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [250.332022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [250.332249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [250.332461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [250.332741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [250.345326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [250.345491] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [250.345681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [250.345889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [250.346192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [250.346482] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [250.346786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [250.347266] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [250.347504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [250.347783] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [250.350065] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [250.350298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [250.354415] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [250.355991] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [250.356546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.356775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [250.357179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [250.357910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [250.358442] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [250.358966] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [250.359466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI A/PHY A]
<7> [250.359730] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:216:DDI B/PHY B]
<7> [250.360136] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DDI TC1/PHY TC1]
<7> [250.360522] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:227:DP-MST A]
<7> [250.360893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:228:DP-MST B]
<7> [250.361255] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:229:DP-MST C]
<7> [250.361560] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:234:DDI TC2/PHY TC2]
<7> [250.361915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:236:DP-MST A]
<7> [250.362293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:237:DP-MST B]
<7> [250.362655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:238:DP-MST C]
<7> [250.363236] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [250.363606] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [250.363829] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [250.364238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [250.364597] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]
<7> [250.364926] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [250.365461] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power on
<7> [250.365718] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [250.365994] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [250.376118] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [250.376562] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power on
<7> [250.376820] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [250.438756] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [250.439568] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:207:DDI A/PHY A] - long
<7> [250.440287] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [250.441054] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A]
<7> [250.594690] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [250.595786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [250.597190] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 turning VDD on
<7> [250.598121] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:207:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [250.600734] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [250.600772] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [250.601342] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [250.602273] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [250.602543] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [250.603431] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Clock recovery OK
<7> [250.603620] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [250.604870] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [250.605082] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [250.605616] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [250.605985] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [250.606178] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [250.606367] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:208:eDP-1] Performing OUI wait (0 ms)
<7> [250.606838] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:208:eDP-1] set backlight PWM = 6844
<7> [250.622871] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [250.626223] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:208:eDP-1]
<7> [250.627143] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]
<7> [250.629957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:217:HDMI-A-1]
<7> [250.630929] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [250.633700] [IGT] kms_pm_rpm: exiting, ret=0
<7> [250.634628] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:226:DP-1]
<7> [250.635454] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [250.636034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:235:DP-2]
<7> [250.636683] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<6> [250.657049] Console: switching to colour frame buffer device 240x67
Created at 2025-12-01 10:58:03