igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	55.01 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.2-g005281c52 (x86_64) (Linux: 6.18.0-CI_DRM_17609-g9fcf9189976d+ x86_64)
Out	Using IGT_SRANDOM=1764557601 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888120325818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x282/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.515s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.492s) Subtest gem-execbuf-stress: SUCCESS (55.011s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.515s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.492s) Subtest gem-execbuf-stress: SUCCESS (55.011s)
Dmesg	<6> [255.700651] Console: switching to colour dummy device 80x25 <6> [255.700799] [IGT] i915_pm_rpm: executing <7> [255.702837] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [255.703469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [255.703479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.707792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [255.707837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [255.707842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.733601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.733609] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.733611] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.733613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.733821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.733947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.734273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.734474] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.735109] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [255.735119] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [255.735127] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [255.735136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [255.735140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [255.735145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [255.735150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [255.735155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [255.735159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [255.735164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [255.735169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [255.735173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [255.735178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [255.735183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [255.735188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [255.735192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [255.735197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [255.735202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [255.735207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [255.735211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.735216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.735221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.735226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [255.735231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [255.735235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [255.735240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [255.735245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [255.735250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [255.735255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [255.735259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [255.735264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [255.735269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.735274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.735278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.735283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [255.735361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [255.735367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.739645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [255.739704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [255.739709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.743986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [255.750669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [255.750676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.754950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [255.755637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [255.755643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.759933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [255.760467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [255.760473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.764784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [255.765327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [255.765332] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.769605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [255.769625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [255.769631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.795492] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.795500] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.795503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.795505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.795707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.795835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.796152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.796282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.796627] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [255.796633] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [255.796637] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [255.796642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [255.796645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [255.796648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [255.796650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [255.796653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [255.796656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [255.796658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [255.796661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [255.796664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [255.796666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [255.796669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [255.796672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [255.796674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [255.796677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [255.796680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [255.796682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [255.796685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.796687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.796690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [255.796693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [255.796695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [255.796698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [255.796700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [255.796703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [255.796706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [255.796708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [255.796711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [255.796714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [255.796716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.796719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.796722] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [255.796724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [255.796749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [255.796753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.800956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [255.800969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [255.800972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.805183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [255.805465] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:236] <7> [256.820534] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [256.820765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [256.821425] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [256.822019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [256.822585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [256.823173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [256.823731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [256.824313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [256.824708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [256.824839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [256.824971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [256.825112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [256.825243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [256.825373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [256.825504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [256.825634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [256.825765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [256.825896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [256.826032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [256.826161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [256.826292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [256.826422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [256.826553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [256.826682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [256.826813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [256.826941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [256.827078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [256.827208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [256.827339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [256.827468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [256.827598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [256.827727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [256.827856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [256.827984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [256.828129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [256.828259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [256.828388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [256.828519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [256.828649] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [256.828779] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0 <7> [256.828931] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [256.829070] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [256.829222] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [256.829352] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [256.829483] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [256.829614] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.829744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.829873] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [256.830022] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0 <7> [256.830157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [256.830304] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [256.830450] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [256.830586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset] <7> [256.830720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [256.830852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [256.830984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [256.831124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [256.831257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [256.831387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [256.836600] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [256.857172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [256.857710] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7> [256.858391] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [256.858933] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [256.859511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [256.860040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [256.860594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [256.861095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [256.861527] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [256.861958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [256.862413] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.863041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.863570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [256.864028] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [256.864929] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [256.865240] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [256.967259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [256.967903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.968583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.970638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.971511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.976109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.977489] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.977767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.978057] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.978195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.978411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [257.068660] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [257.069826] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [257.070349] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [257.085472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.086084] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.086690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.087360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.088060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.088739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.089427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.090108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.090759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.092139] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.092717] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.094300] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.096388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.096916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.108378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.108515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.108663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.111912] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [257.113342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.143192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.143200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.143203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.143205] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.143411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.143534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.143841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.143968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.144382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [257.145479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.146943] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [257.146946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.151286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.155650] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [257.215206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [257.215859] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.216533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.218277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.218909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.224783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.226271] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.227000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.227745] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.228347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.228950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.269479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.269839] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.270523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.271222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.271892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.272618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.273295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.273936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.274592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.276041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.276617] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.277093] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.277796] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.277933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.286522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.286707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.286876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.288019] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.291509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.333508] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.333518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.333520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.333523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.333729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.334851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.335190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.336081] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.336101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.340883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.399356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.400112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.407127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.408801] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.409599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.410555] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.411238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.411850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.504147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.504504] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.505158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.505787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.506488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.507173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.507818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.508497] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.509130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.509913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.510064] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.510314] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.511018] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.511168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.517312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.517409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.517550] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.519345] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.522292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.554250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.554260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.554262] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.554265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.554506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.554635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.554948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.555090] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.555111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.560265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.623199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.623916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.629836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.631246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.631476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.631757] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.631896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.632073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.735183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.735543] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.736192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.736822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.737564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.738262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.738910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.739598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.740248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.740731] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.740865] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.741150] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.741837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.741982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.749347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.749585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.749834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.750112] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.754426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.784479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.784489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.784491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.784494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.784704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.784830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.785306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.785437] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.785461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.791348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.855155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.855864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.861782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.863267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.864008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.864753] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.865346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.865970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.966160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.966511] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.967158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.967800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.968512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.969206] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.969855] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.970562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.971241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.971915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.972517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.972781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.973470] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.973605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.981010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.981151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.981357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.982514] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.985942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.027985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.027994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.027997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.027999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.028215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.029233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.029559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.030458] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.030480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.035261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.087328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.088083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.093888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.095276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.095508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.095788] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.095933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.096102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [258.197181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.197548] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.198207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.198834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.199546] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.200241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.200893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.201584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.202269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.202950] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.203508] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.204228] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.206294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.206858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.215977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.216203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.216919] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.217223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.221912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.251782] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.251791] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.251794] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.251797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.252670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.252799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.253127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.253260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.253281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.257563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.327301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.328013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.333852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.335333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.336064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.336807] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.337412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.338026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [258.432107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.432460] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.433116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.434032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.434956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.435634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.436457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.437447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.438145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.438614] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.438813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.439159] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.439851] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.440014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.451173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.451315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.451768] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.451952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.456630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.488663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.488673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.488675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.488678] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.488885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.489804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.490198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.490369] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.490394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.494702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.559184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.559963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.565816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.567229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.567481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.567762] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.567900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.568084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [258.668113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.668470] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.669129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.669758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.670466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.671153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.671799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.672486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.673122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.673782] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.674385] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.674967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.675651] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.675786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.683194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.683349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.683863] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.684062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.688596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.720648] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.720658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.720661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.720663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.720876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.721824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.722146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.722311] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.722343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.726687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.791136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.791852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.797848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.799393] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.800133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.800880] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.801502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.802245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [258.900097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.900451] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.901115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.901745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.902453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.903140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.903788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.904470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.905105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.905709] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.905841] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.906094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.906841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.907452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.916553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.916789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.917164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.917694] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.921885] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.951824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.951833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.951836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.951838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.952630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.952759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.953074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.953204] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.953225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.957536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [259.023091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [259.023799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [259.029799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.031339] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [259.032090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [259.032837] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [259.033482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [259.034200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [259.134791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [259.135247] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [259.135860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [259.136535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [259.137236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.138061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.138837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.139573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.140241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [259.140770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [259.140913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [259.141197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [259.141906] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [259.142050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [259.148231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [259.148332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [259.148474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [259.150724] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [259.153185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [259.184130] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [259.184140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [259.184142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [259.184145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [259.184357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.184483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [259.184797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.185197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [259.185221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [259.190151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [259.255045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [259.255699] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [259.261602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.262972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [259.263643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [259.263944] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [259.264093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [259.264276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [259.367077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [259.367438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [259.368092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [259.369009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [259.369937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.370609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.371480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.372456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.372701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [259.372941] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [259.373075] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [259.373364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [259.374113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [259.374281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [259.380504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [259.380603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [259.380747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [259.381153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [259.385459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [259.416337] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [259.416347] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [259.416349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [259.416352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [259.416553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.416681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [259.416999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.417199] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [259.417235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [259.422381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [259.487124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [259.487849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [259.493800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.495303] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [259.496026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [259.496775] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [259.497388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [259.498010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [259.586038] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [259.587188] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [259.587590] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [259.601968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [259.602128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [259.602419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [259.602736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [259.603155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.603523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.603958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.604369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.604753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [259.605470] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [259.605806] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [259.606525] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [259.607959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [259.608309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [259.618358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [259.618491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [259.618886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [259.621636] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [259.623426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [259.650136] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [259.650144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [259.650147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [259.650150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [259.650351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.650479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [259.650788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.650934] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [259.651028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [259.655321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [259.660301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [259.661319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.662765] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [259.662880] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [259.727256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [259.727985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [259.728581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [259.730334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [259.730989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [259.737989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.739477] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [259.740214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [259.740934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [259.741449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [259.742019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [259.776025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [259.776382] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [259.777033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [259.777741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [259.778476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.779278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.779971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.780708] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [259.781382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [259.782138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [259.782697] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [259.783468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [259.785565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [259.786166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [259.796453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [259.796652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [259.796997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [259.801765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [259.802924] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [259.831187] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [259.831197] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [259.831200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [259.831202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [259.831403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.831536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [259.831860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [259.831993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [259.832015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [259.837185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [259.911070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [259.911793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [259.917731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [259.919232] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [259.919978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [259.920726] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [259.921337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [259.921960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [265.020804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [265.021153] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [265.021797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [265.022425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [265.023128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.023864] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.024584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.025270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.025915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [265.026434] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [265.026563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [265.026865] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [265.027569] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [265.028190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [265.037286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [265.037523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [265.037902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [265.038419] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [265.042630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [265.073284] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [265.073293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [265.073296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [265.073298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [265.073503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.073635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [265.074695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.074829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [265.074851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [265.079324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [265.142833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [265.143545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [265.149468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [265.150867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [265.151105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [265.151385] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [265.151522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [265.151702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [267.175053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [267.188859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [267.189363] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [267.190024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [267.190672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [267.191347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.192064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.192734] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.193388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.194069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [267.194527] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [267.194666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [267.195078] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [267.195773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [267.195910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [267.203314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [267.203445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [267.208255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [267.239985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [267.239994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [267.239997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [267.240001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [267.240209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.240340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [267.241260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.241393] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [267.241414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [267.247369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [267.252417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [267.257124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [267.287409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [267.287416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [267.287419] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [267.287421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [267.287814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.287936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [267.288235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.288362] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [267.288382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [267.292695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [267.297590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [267.297738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [267.301229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [267.302571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [267.302803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [267.303082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [267.303219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [267.303387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [270.254536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [270.254885] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [270.255558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [270.256231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.256977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.257689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.258334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.259049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.259703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.260359] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [270.260502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [270.260750] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.261447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [270.261579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [270.268947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [270.269038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.269379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [270.269436] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [270.273951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [270.304692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [270.304701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.304704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [270.304706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [270.304917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.305048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [270.305387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.305518] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [270.305539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [270.310691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [270.374485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.375093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.380967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.382381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.382639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.382919] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.383057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.383226] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [275.486293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [275.486649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [275.487303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [275.487932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [275.488715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [275.489452] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [275.490095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [275.490786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [275.491335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [275.491575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [275.491708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [275.491953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [275.492634] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [275.492769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [275.498943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [275.499041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [275.499205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [275.499848] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [275.503856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [275.532990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [275.532999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [275.533002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [275.533004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [275.533444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [275.533573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [275.533885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [275.534015] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [275.534037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [275.538352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [275.606435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [275.607842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [275.612529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [275.613876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [275.614146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [275.614427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [275.614565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [275.614735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [277.414209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [277.426185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [277.426536] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [277.427197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [277.427834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [277.428543] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.429233] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.429885] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.430588] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.431249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [277.431934] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [277.432076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [277.432503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [277.433216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [277.433360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [277.438384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [277.438470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [277.443255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [277.473989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [277.473997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [277.474000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [277.474009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [277.474225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [277.474355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [277.474668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [277.474797] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [277.474817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [277.479963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [277.484877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [277.489740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [277.519703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [277.519709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [277.519712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [277.519714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [277.519911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [277.520395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [277.520714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [277.520843] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [277.520862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [277.525327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [277.530204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [277.530350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [277.533881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [277.535197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [277.535434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [277.535713] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [277.535850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [277.536025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [280.716079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [280.716434] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [280.717092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [280.717732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [280.718474] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.719173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.719503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.719696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [280.719882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [280.720123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [280.720255] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [280.720496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [280.721195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [280.721328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [280.728692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [280.728785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [280.728969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [280.730153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [280.733662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [280.779614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [280.779624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [280.779627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [280.779629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [280.779836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.780969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [280.781293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [280.782178] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [280.782200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [280.786980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [280.838230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [280.839001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [280.844869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [280.846237] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [280.846483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [280.846791] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [280.846944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [280.847122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [285.944467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [285.944824] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [285.945491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [285.946214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [285.946885] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [285.947433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [285.947628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [285.947819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [285.947998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [285.948254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [285.948384] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [285.948622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [285.949315] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [285.949449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [285.956835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [285.956924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [285.957098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [285.958286] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [285.961758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [285.990812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [285.990822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.990824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [285.990827] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [285.991058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [285.991207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [285.991523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [285.991654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [285.991676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [285.996142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [286.062393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [286.063156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [286.068971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [286.070364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [286.070609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [286.070910] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [286.071091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [286.071270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.654308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [287.667102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.667458] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [287.668058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [287.668739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [287.669570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.670325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.671046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.671784] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [287.672531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [287.673143] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [287.673314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [287.673598] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [287.674308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.674457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.680606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.680693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.685573] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [287.717572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [287.717580] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.717583] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [287.717585] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [287.717815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.717945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [287.718258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.718399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [287.718420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [287.723721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [287.728586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [287.733485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [287.765366] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [287.765373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.765376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [287.765378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [287.765576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.765702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [287.766006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [287.766487] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [287.766512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [287.771420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [287.776313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.776457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [287.781156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.782492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [287.782728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [287.783009] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [287.783163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [287.783348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [291.173469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [291.173860] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [291.174637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [291.175320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.176035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [291.176814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [291.177473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [291.177918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [291.178114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [291.178362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [291.178495] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [291.178765] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [291.179462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [291.179594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [291.185737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [291.185830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [291.185967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [291.191872] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [291.191877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [291.237429] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [291.237439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.237442] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [291.237444] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [291.238662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [291.238798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [291.239847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [291.239979] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [291.240000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [291.244733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [291.294635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [291.295164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [291.300962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [291.302378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [291.302616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [291.302897] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [291.303034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [291.303202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.408701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [296.409056] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [296.409711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [296.410349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [296.411082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.411769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.412236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.412428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.412620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [296.412860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [296.412993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [296.413233] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [296.413922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.414056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.420209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [296.420339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.420476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [296.421652] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [296.425177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [296.470962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [296.470972] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.470974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [296.470977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [296.471191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.472289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [296.472607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.473538] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [296.473560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [296.478310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [296.526858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.527635] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.533469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.534953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [296.535646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [296.536339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [296.536898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [296.537457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [297.894644] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [297.906614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [297.906725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [297.906869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [297.907043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [297.907310] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [297.907525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [297.907759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [297.907955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [297.908133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [297.908375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [297.908507] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [297.908855] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [297.909545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [297.909692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [297.915854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [297.915952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [297.920775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [297.965529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [297.965541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [297.965545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [297.965548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [297.965783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [297.966790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [297.967937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [297.968069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [297.968091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [297.972805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [297.977704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [297.982565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [298.025804] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [298.025811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.025814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [298.025816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [298.027009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.027134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [298.027441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.028347] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [298.028367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [298.033148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [298.038022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [298.038167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [298.041666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [298.043007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [298.043273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [298.043552] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [298.043704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [298.043873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [301.635949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [301.636304] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [301.636960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [301.637629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [301.638412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [301.639104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [301.639763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [301.640406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [301.641048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [301.641592] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [301.641735] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [301.641973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [301.642647] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [301.642791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [301.648973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [301.649070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [301.649210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [301.650411] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [301.653906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [301.687034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [301.687043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [301.687046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [301.687048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [301.687256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [301.687382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [301.687693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [301.687829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [301.687850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [301.693077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [301.759021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [301.759787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [301.765636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [301.767111] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [301.767840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [301.768584] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [301.769194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [301.769813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [306.864114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [306.864503] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [306.865235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [306.865967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [306.866716] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.867487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.868204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.868480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.868658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [306.868900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [306.869051] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [306.869299] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [306.869989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [306.870124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [306.876271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [306.876386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [306.876524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [306.877716] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [306.881218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [306.926916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [306.926929] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [306.926931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [306.926934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [306.927150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.928234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [306.928566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.929432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [306.929455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [306.934243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [306.983210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [306.983817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [306.989798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [306.991131] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [306.991368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [306.991650] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [306.991789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [306.991970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [308.135107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [308.147153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [308.147506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [308.148188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [308.148819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [308.149539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.150237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.150896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.151612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [308.152299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [308.152924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [308.153068] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [308.153340] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [308.154037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [308.154172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [308.160312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [308.160399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [308.165276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [308.207487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [308.207497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [308.207499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [308.207502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [308.207707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.208499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [308.208818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.209734] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [308.209755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [308.214539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [308.219394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [308.224283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [308.266239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [308.266247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [308.266249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [308.266252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [308.266452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.267531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [308.267851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [308.268774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [308.268793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [308.273576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [308.278450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [308.278596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [308.282104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [308.283415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [308.283646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [308.283925] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [308.284079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [308.284249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [312.079979] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [312.081353] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [312.084776] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [312.084952] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [312.085100] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [312.085251] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A] <7> [312.085390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [312.085540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [312.085676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [312.085810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [312.085944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [312.086093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [312.086241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [312.086372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [312.086503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [312.086633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [312.086765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [312.086895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [312.087030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [312.087184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [312.087316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [312.087447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [312.087579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [312.087710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [312.087839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [312.087969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [312.088121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [312.088252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [312.088381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [312.088512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [312.088641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [312.088771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [312.088900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [312.089029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [312.089173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [312.089303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [312.089432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [312.089561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [312.089691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [312.089821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [312.089951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [312.090087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [312.090217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [312.090346] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [312.090502] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [312.090635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [312.090768] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [312.090898] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [312.091030] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [312.091206] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [312.091357] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [312.091486] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [312.091630] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1 <7> [312.091766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [312.091898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [312.092044] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [312.092208] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [312.092342] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0 <7> [312.092479] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7> [312.092617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset] <7> [312.092751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [312.092883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [312.093016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [312.093158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [312.093289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [312.093419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [312.093549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [312.093679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [312.093808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [312.093937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [312.094076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [312.094205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [312.094334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [312.094463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [312.094593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [312.094722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [312.094851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [312.094981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [312.095124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [312.095252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [312.095382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [312.095510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [312.095639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [312.095769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [312.095897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [312.096026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.096194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.096323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.096451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [312.096579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [312.096707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.096836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.096962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [312.097099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [312.097228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [312.097356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [312.097485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [312.097613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [312.097742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [312.097870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [312.097998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [312.098135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [312.098263] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [312.110438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [312.110596] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [312.110778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [312.110986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [312.111294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [312.111541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [312.111762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [312.111959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [312.112160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [312.112667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [312.112808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [312.113254] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [312.113957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [312.114114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [312.122694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [312.122842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [312.123077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [312.123904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [312.125324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [312.125477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [312.125613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [312.125746] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [312.125877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [312.126008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [312.126149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [312.126320] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [312.126544] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7> [312.126680] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [312.126871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [312.127089] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [312.127394] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d <7> [312.127988] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [312.128142] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [312.146244] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a <7> [312.146495] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation <7> [312.147205] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [312.147643] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [312.149641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [312.150206] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [312.150452] [IGT] i915_pm_rpm: exiting, ret=0 <7> [312.154015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [312.175462] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive <7> [312.179799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [312.179808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [312.179811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [312.179815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [312.180022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [312.180193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [312.180506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [312.180654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [312.185151] Console: switching to colour frame buffer device 240x67 <7> [312.185173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [312.189397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.703469] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [255.703479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.707792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [255.707837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [255.707842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.733601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.733609] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.733611] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.733613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.733821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.733947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.734273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.734474] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.735109] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [255.735119] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [255.735127] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [255.735136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [255.735140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [255.735145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [255.735150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [255.735155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [255.735159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [255.735164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [255.735169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [255.735173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [255.735178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [255.735183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [255.735188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [255.735192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [255.735197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [255.735202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [255.735207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [255.735211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.735216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.735221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.735226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [255.735231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [255.735235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [255.735240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [255.735245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [255.735250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [255.735255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [255.735259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [255.735264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [255.735269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.735274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.735278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.735283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [255.735361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [255.735367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.739645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [255.739704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [255.739709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.743986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [255.750669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [255.750676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.754950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [255.755637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [255.755643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.759933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [255.760467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [255.760473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.764784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [255.765327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [255.765332] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.769605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [255.769625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [255.769631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.795492] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.795500] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.795503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.795505] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.795707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.795835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.796152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.796282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.796627] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [255.796633] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [255.796637] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [255.796642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [255.796645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [255.796648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [255.796650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [255.796653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [255.796656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [255.796658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [255.796661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [255.796664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [255.796666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [255.796669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [255.796672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [255.796674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [255.796677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [255.796680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [255.796682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [255.796685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.796687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.796690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [255.796693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [255.796695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [255.796698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [255.796700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [255.796703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [255.796706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [255.796708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [255.796711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [255.796714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [255.796716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.796719] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.796722] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [255.796724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [255.796749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [255.796753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.800956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [255.800969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [255.800972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.805183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [256.820534] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [256.820765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [256.821425] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [256.822019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [256.822585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [256.823173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [256.823731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [256.824313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [256.824708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [256.824839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [256.824971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [256.825112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [256.825243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [256.825373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [256.825504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [256.825634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [256.825765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [256.825896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [256.826032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [256.826161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [256.826292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [256.826422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [256.826553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [256.826682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [256.826813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [256.826941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [256.827078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [256.827208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [256.827339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [256.827468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [256.827598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [256.827727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [256.827856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [256.827984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [256.828129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [256.828259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [256.828388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [256.828519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [256.828649] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [256.828779] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0

<7> [256.828931] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [256.829070] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [256.829222] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [256.829352] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [256.829483] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [256.829614] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.829744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.829873] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [256.830022] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0

<7> [256.830157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [256.830304] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [256.830450] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [256.830586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset]

<7> [256.830720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [256.830852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [256.830984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [256.831124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [256.831257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [256.831387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [256.836600] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [256.857172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [256.857710] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]

<7> [256.858391] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [256.858933] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [256.859511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [256.860040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [256.860594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [256.861095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [256.861527] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [256.861958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [256.862413] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.863041] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.863570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [256.864028] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [256.864929] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [256.865240] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [256.967259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [256.967903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.968583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.970638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.971511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.976109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.977489] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.977767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.978057] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.978195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.978411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [257.068660] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [257.085472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.086084] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.086690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.087360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.088060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.088739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.089427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.090108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.090759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.092139] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.092717] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.094300] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.096388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.096916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.108378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.108515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.108663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.111912] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [257.113342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.143192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.143200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.143203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.143205] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.143411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.143534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.143841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.143968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.144382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [257.145479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.146943] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [257.146946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.151286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.155650] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [257.215206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [257.215859] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.216533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.218277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.218909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.224783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.226271] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.227000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.227745] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.228347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.228950] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.269479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.269839] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.270523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.271222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.271892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.272618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.273295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.273936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.274592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.276041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.276617] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.277093] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.277796] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.277933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.286522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.286707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.286876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.288019] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.291509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.333508] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.333518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.333520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.333523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.333729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.334851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.335190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.336081] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.336101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.340883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.399356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.400112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.407127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.408801] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.409599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.410555] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.411238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.411850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.504147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.504504] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.505158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.505787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.506488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.507173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.507818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.508497] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.509130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.509913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.510064] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.510314] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.511018] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.511168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.517312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.517409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.517550] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.519345] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.522292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.554250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.554260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.554262] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.554265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.554506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.554635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.554948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.555090] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.555111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.560265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.623199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.623916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.629836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.631246] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.631476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.631757] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.631896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.632073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.735183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.735543] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.736192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.736822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.737564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.738262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.738910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.739598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.740248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.740731] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.740865] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.741150] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.741837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.741982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.749347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.749585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.749834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.750112] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.754426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.784479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.784489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.784491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.784494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.784704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.784830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.785306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.785437] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.785461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.791348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.855155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.855864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.861782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.863267] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.864008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.864753] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.865346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.865970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.966160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.966511] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.967158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.967800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.968512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.969206] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.969855] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.970562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.971241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.971915] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.972517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.972781] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.973470] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.973605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.981010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.981151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.981357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.982514] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.985942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.027985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.027994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.027997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.027999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.028215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.029233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.029559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.030458] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.030480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.035261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.087328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.088083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.093888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.095276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.095508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.095788] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.095933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.096102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [258.197181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.197548] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.198207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.198834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.199546] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.200241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.200893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.201584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.202269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.202950] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.203508] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.204228] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.206294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.206858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.215977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.216203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.216919] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.217223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.221912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.251782] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.251791] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.251794] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.251797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.252670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.252799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.253127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.253260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.253281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.257563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.327301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.328013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.333852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.335333] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.336064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.336807] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.337412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.338026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [258.432107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.432460] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.433116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.434032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.434956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.435634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.436457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.437447] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.438145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.438614] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.438813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.439159] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.439851] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.440014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.451173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.451315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.451768] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.451952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.456630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.488663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.488673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.488675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.488678] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.488885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.489804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.490198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.490369] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.490394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.494702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.559184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.559963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.565816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.567229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.567481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.567762] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.567900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.568084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [258.668113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.668470] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.669129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.669758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.670466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.671153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.671799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.672486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.673122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.673782] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.674385] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.674967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.675651] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.675786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.683194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.683349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.683863] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.684062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.688596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.720648] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.720658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.720661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.720663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.720876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.721824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.722146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.722311] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.722343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.726687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.791136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.791852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.797848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.799393] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.800133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.800880] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.801502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.802245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [258.900097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.900451] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.901115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.901745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.902453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.903140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.903788] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.904470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.905105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.905709] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.905841] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.906094] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.906841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.907452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.916553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.916789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.917164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.917694] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.921885] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.951824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.951833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.951836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.951838] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.952630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.952759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.953074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.953204] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.953225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.957536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [259.023091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [259.023799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [259.029799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.031339] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [259.032090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [259.032837] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [259.033482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [259.034200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [259.134791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [259.135247] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [259.135860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [259.136535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [259.137236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.138061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.138837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.139573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.140241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [259.140770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [259.140913] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [259.141197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [259.141906] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [259.142050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [259.148231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [259.148332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [259.148474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [259.150724] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [259.153185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [259.184130] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [259.184140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [259.184142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [259.184145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [259.184357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.184483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [259.184797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.185197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [259.185221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [259.190151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [259.255045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [259.255699] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [259.261602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.262972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [259.263643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [259.263944] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [259.264093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [259.264276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [259.367077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [259.367438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [259.368092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [259.369009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [259.369937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.370609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.371480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.372456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.372701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [259.372941] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [259.373075] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [259.373364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [259.374113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [259.374281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [259.380504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [259.380603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [259.380747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [259.381153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [259.385459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [259.416337] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [259.416347] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [259.416349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [259.416352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [259.416553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.416681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [259.416999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.417199] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [259.417235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [259.422381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [259.487124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [259.487849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [259.493800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.495303] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [259.496026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [259.496775] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [259.497388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [259.498010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [259.587188] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [259.601968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [259.602128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [259.602419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [259.602736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [259.603155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.603523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.603958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.604369] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.604753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [259.605470] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [259.605806] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [259.606525] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [259.607959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [259.608309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [259.618358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [259.618491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [259.618886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [259.621636] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [259.623426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [259.650136] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [259.650144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [259.650147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [259.650150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [259.650351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.650479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [259.650788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.650934] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [259.651028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [259.655321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [259.660301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [259.661319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.662765] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [259.662880] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [259.727256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [259.727985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [259.728581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [259.730334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [259.730989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [259.737989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.739477] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [259.740214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [259.740934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [259.741449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [259.742019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [259.776025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [259.776382] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [259.777033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [259.777741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [259.778476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.779278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.779971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.780708] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [259.781382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [259.782138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [259.782697] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [259.783468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [259.785565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [259.786166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [259.796453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [259.796652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [259.796997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [259.801765] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [259.802924] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [259.831187] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [259.831197] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [259.831200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [259.831202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [259.831403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.831536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [259.831860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [259.831993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [259.832015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [259.837185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [259.911070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [259.911793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [259.917731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [259.919232] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [259.919978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [259.920726] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [259.921337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [259.921960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [265.020804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [265.021153] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [265.021797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [265.022425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [265.023128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.023864] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.024584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.025270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.025915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [265.026434] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [265.026563] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [265.026865] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [265.027569] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [265.028190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [265.037286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [265.037523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [265.037902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [265.038419] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [265.042630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [265.073284] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [265.073293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [265.073296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [265.073298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [265.073503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.073635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [265.074695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.074829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [265.074851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [265.079324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [265.142833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [265.143545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [265.149468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [265.150867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [265.151105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [265.151385] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [265.151522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [265.151702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [267.175053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [267.188859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [267.189363] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [267.190024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [267.190672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [267.191347] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.192064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.192734] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.193388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.194069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [267.194527] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [267.194666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [267.195078] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [267.195773] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [267.195910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [267.203314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [267.203445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [267.208255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [267.239985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [267.239994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [267.239997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [267.240001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [267.240209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.240340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [267.241260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.241393] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [267.241414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [267.247369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [267.252417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [267.257124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [267.287409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [267.287416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [267.287419] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [267.287421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [267.287814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.287936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [267.288235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.288362] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [267.288382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [267.292695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [267.297590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [267.297738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [267.301229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [267.302571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [267.302803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [267.303082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [267.303219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [267.303387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [270.254536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [270.254885] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [270.255558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [270.256231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.256977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.257689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.258334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.259049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.259703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.260359] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [270.260502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [270.260750] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.261447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [270.261579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [270.268947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [270.269038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.269379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [270.269436] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [270.273951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [270.304692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [270.304701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.304704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [270.304706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [270.304917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.305048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [270.305387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.305518] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [270.305539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [270.310691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [270.374485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.375093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.380967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.382381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.382639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.382919] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.383057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.383226] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [275.486293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [275.486649] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [275.487303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [275.487932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [275.488715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [275.489452] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [275.490095] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [275.490786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [275.491335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [275.491575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [275.491708] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [275.491953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [275.492634] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [275.492769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [275.498943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [275.499041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [275.499205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [275.499848] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [275.503856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [275.532990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [275.532999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [275.533002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [275.533004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [275.533444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [275.533573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [275.533885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [275.534015] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [275.534037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [275.538352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [275.606435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [275.607842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [275.612529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [275.613876] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [275.614146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [275.614427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [275.614565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [275.614735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [277.414209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [277.426185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [277.426536] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [277.427197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [277.427834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [277.428543] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.429233] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.429885] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.430588] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.431249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [277.431934] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [277.432076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [277.432503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [277.433216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [277.433360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [277.438384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [277.438470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [277.443255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [277.473989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [277.473997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [277.474000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [277.474009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [277.474225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [277.474355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [277.474668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [277.474797] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [277.474817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [277.479963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [277.484877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [277.489740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [277.519703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [277.519709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [277.519712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [277.519714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [277.519911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [277.520395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [277.520714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [277.520843] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [277.520862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [277.525327] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [277.530204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [277.530350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [277.533881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [277.535197] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [277.535434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [277.535713] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [277.535850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [277.536025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [280.716079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [280.716434] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [280.717092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [280.717732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [280.718474] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.719173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.719503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.719696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [280.719882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [280.720123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [280.720255] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [280.720496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [280.721195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [280.721328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [280.728692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [280.728785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [280.728969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [280.730153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [280.733662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [280.779614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [280.779624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [280.779627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [280.779629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [280.779836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.780969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [280.781293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [280.782178] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [280.782200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [280.786980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [280.838230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [280.839001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [280.844869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [280.846237] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [280.846483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [280.846791] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [280.846944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [280.847122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [285.944467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [285.944824] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [285.945491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [285.946214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [285.946885] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [285.947433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [285.947628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [285.947819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [285.947998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [285.948254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [285.948384] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [285.948622] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [285.949315] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [285.949449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [285.956835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [285.956924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [285.957098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [285.958286] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [285.961758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [285.990812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [285.990822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.990824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [285.990827] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [285.991058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [285.991207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [285.991523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [285.991654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [285.991676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [285.996142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [286.062393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [286.063156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [286.068971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [286.070364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [286.070609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [286.070910] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [286.071091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [286.071270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.654308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [287.667102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.667458] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [287.668058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [287.668739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [287.669570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.670325] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.671046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.671784] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [287.672531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [287.673143] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [287.673314] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [287.673598] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [287.674308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.674457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.680606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.680693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.685573] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [287.717572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [287.717580] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.717583] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [287.717585] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [287.717815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.717945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [287.718258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.718399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [287.718420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [287.723721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [287.728586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [287.733485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [287.765366] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [287.765373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.765376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [287.765378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [287.765576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.765702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [287.766006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [287.766487] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [287.766512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [287.771420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [287.776313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.776457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [287.781156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.782492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [287.782728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [287.783009] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [287.783163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [287.783348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [291.173469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [291.173860] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [291.174637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [291.175320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.176035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [291.176814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [291.177473] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [291.177918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [291.178114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [291.178362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [291.178495] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [291.178765] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [291.179462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [291.179594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [291.185737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [291.185830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [291.185967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [291.191872] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [291.191877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [291.237429] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [291.237439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.237442] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [291.237444] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [291.238662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [291.238798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [291.239847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [291.239979] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [291.240000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [291.244733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [291.294635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [291.295164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [291.300962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [291.302378] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [291.302616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [291.302897] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [291.303034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [291.303202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.408701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [296.409056] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [296.409711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [296.410349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [296.411082] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.411769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.412236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.412428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.412620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [296.412860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [296.412993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [296.413233] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [296.413922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.414056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.420209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [296.420339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.420476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [296.421652] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [296.425177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [296.470962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [296.470972] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.470974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [296.470977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [296.471191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.472289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [296.472607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.473538] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [296.473560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [296.478310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [296.526858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.527635] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.533469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.534953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [296.535646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [296.536339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [296.536898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [296.537457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [297.894644] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [297.906614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [297.906725] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [297.906869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [297.907043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [297.907310] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [297.907525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [297.907759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [297.907955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [297.908133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [297.908375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [297.908507] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [297.908855] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [297.909545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [297.909692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [297.915854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [297.915952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [297.920775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [297.965529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [297.965541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [297.965545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [297.965548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [297.965783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [297.966790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [297.967937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [297.968069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [297.968091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [297.972805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [297.977704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [297.982565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [298.025804] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [298.025811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.025814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [298.025816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [298.027009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.027134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [298.027441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.028347] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [298.028367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [298.033148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [298.038022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [298.038167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [298.041666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [298.043007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [298.043273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [298.043552] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [298.043704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [298.043873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [301.635949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [301.636304] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [301.636960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [301.637629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [301.638412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [301.639104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [301.639763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [301.640406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [301.641048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [301.641592] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [301.641735] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [301.641973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [301.642647] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [301.642791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [301.648973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [301.649070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [301.649210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [301.650411] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [301.653906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [301.687034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [301.687043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [301.687046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [301.687048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [301.687256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [301.687382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [301.687693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [301.687829] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [301.687850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [301.693077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [301.759021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [301.759787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [301.765636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [301.767111] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [301.767840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [301.768584] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [301.769194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [301.769813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [306.864114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [306.864503] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [306.865235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [306.865967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [306.866716] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.867487] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.868204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.868480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.868658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [306.868900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [306.869051] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [306.869299] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [306.869989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [306.870124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [306.876271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [306.876386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [306.876524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [306.877716] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [306.881218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [306.926916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [306.926929] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [306.926931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [306.926934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [306.927150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.928234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [306.928566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.929432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [306.929455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [306.934243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [306.983210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [306.983817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [306.989798] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [306.991131] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [306.991368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [306.991650] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [306.991789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [306.991970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [308.135107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [308.147153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [308.147506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [308.148188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [308.148819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [308.149539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.150237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.150896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.151612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [308.152299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [308.152924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [308.153068] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [308.153340] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [308.154037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [308.154172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [308.160312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [308.160399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [308.165276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [308.207487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [308.207497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [308.207499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [308.207502] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [308.207707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.208499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [308.208818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.209734] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [308.209755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [308.214539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [308.219394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [308.224283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [308.266239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [308.266247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [308.266249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [308.266252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [308.266452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.267531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [308.267851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [308.268774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [308.268793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [308.273576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [308.278450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [308.278596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [308.282104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [308.283415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [308.283646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [308.283925] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [308.284079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [308.284249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [312.079979] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [312.081353] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [312.084776] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [312.084952] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [312.085100] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [312.085251] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A]

<7> [312.085390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [312.085540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [312.085676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [312.085810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [312.085944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [312.086093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [312.086241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [312.086372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [312.086503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [312.086633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [312.086765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [312.086895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [312.087030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [312.087184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [312.087316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [312.087447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [312.087579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [312.087710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [312.087839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [312.087969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [312.088121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [312.088252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [312.088381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [312.088512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [312.088641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [312.088771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [312.088900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [312.089029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [312.089173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [312.089303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [312.089432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [312.089561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [312.089691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [312.089821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [312.089951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [312.090087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [312.090217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [312.090346] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [312.090502] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [312.090635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [312.090768] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [312.090898] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [312.091030] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [312.091206] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [312.091357] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [312.091486] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [312.091630] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1

<7> [312.091766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [312.091898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [312.092044] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [312.092208] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [312.092342] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0

<7> [312.092479] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0

<7> [312.092617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset]

<7> [312.092751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [312.092883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [312.093016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [312.093158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [312.093289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [312.093419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [312.093549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [312.093679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [312.093808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [312.093937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [312.094076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [312.094205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [312.094334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [312.094463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [312.094593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [312.094722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [312.094851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [312.094981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [312.095124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [312.095252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [312.095382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [312.095510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [312.095639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [312.095769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [312.095897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [312.096026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.096194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.096323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.096451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [312.096579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [312.096707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.096836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.096962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [312.097099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [312.097228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [312.097356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [312.097485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [312.097613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [312.097742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [312.097870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [312.097998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [312.098135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [312.098263] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [312.110438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [312.110596] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [312.110778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [312.110986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [312.111294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [312.111541] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [312.111762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [312.111959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [312.112160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [312.112667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [312.112808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [312.113254] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [312.113957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [312.114114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [312.122694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [312.122842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [312.123077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [312.123904] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [312.125324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [312.125477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [312.125613] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [312.125746] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [312.125877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [312.126008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [312.126149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [312.126320] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [312.126544] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]

<7> [312.126680] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [312.126871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [312.127089] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [312.127394] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d

<7> [312.127988] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [312.128142] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [312.146244] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a

<7> [312.146495] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation

<7> [312.147205] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [312.147643] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [312.149641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [312.150206] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [312.154015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [312.175462] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive

<7> [312.179799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [312.179808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [312.179811] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [312.179815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [312.180022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [312.180193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [312.180506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [312.180654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [312.185151] Console: switching to colour frame buffer device 240x67

<7> [312.185173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [312.189397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress