igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	13.22 seconds
Igt-Version	IGT-Version: 2.2-g005281c52 (x86_64) (Linux: 6.18.0-rc7-CI_DRM_17608-g157d0854a24f+ x86_64)
Out	Using IGT_SRANDOM=1764369590 for randomisation Opened device: /dev/dri/card1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88823af89818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810e641818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x86/0x140 [snd_hda_core] azx_probe_continue+0x24f/0x9c0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6f0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x2d7/0x310 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88810e641818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x990 [i915] intel_dp_aux_transfer+0xd4/0x340 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c1/0x14e0 [i915] intel_ddi_init+0xcef/0x1210 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x16a/0x260 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888130465818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1bb/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.216s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.216s)
Dmesg	<6> [284.052841] Console: switching to colour dummy device 80x25 <6> [284.053840] [IGT] i915_pm_rpm: executing <7> [284.057530] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [284.058300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [284.058312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [284.058943] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.059298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.059643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.060032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.060047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [284.060056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [284.060091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [284.060377] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.060755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.063546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [284.063558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.063569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.063753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [284.063765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [284.068305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [284.068398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [284.068406] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [284.069769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.070267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.070819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.071231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.071239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.071539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.074780] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.074805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.075213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [284.075343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [284.075354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [284.079923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [284.080063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [284.080074] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [284.080753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.081157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.081748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.082209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.082218] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.082600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.085865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.085877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.086313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [284.096447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [284.096461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [284.101081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [284.102085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [284.102098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [284.102834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.103230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.103826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.104266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.104276] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.104665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.107962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.107973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.108402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [284.109430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [284.109443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [284.113972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [284.114967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [284.114980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [284.115681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.116087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.116603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.117032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.117042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.117426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.120704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.120714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.121150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [284.121968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [284.121980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [284.122424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.122779] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.123174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.123605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.123616] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [284.123623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [284.123658] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [284.124070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.124446] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.125620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [284.125630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.125637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.125671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [284.125678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [284.130088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [284.130122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [284.130129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [284.130645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.130936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.131463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.131875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.131884] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.132234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.135436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.135444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.135755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [284.135804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [284.135814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [284.140243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [284.140276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [284.140284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [284.140815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.141177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.141719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.142153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.142162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.142523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.145656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.145664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.146055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [284.146656] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [284.311186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [285.189312] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [285.189481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [285.189844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [285.190190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [285.190497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [285.190827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [285.191154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [285.191463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [285.191757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [285.192101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [285.192408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [285.192705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [285.193019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [285.193330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [285.193625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [285.193939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [285.194254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [285.194548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [285.194892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [285.195198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [285.195494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [285.195809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [285.196121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [285.196412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [285.196707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [285.197029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [285.197350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [285.197703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [285.198061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [285.198403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [285.198731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [285.199087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [285.199429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [285.199760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [285.200115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [285.200453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [285.200753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [285.201087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [285.201401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [285.201695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [285.202013] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [285.202324] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [285.202659] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [285.202996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [285.203292] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [285.203578] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [285.203917] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [285.204255] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [285.204543] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [285.204964] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [285.205316] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [285.205645] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [285.205976] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [285.206321] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [285.206623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [285.206946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [285.207301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [285.207627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [285.208137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [285.209864] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [285.415182] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [285.417348] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [285.424937] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [285.425995] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [285.426994] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [285.428814] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [285.430289] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [285.481344] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [285.481403] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [285.482905] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [285.483476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [285.484315] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [285.485753] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [285.486721] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [285.487185] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [285.488659] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [285.490220] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [285.493286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [285.494839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [285.496276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [285.497711] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [285.499132] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [285.500587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [285.502018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [285.503087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [285.504429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [285.505860] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [285.508517] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [285.511192] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [285.512520] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [285.615252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [285.617342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [285.619026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [285.621172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [285.625715] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [285.642992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [285.728699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [285.730020] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [285.731197] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [285.733019] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [285.734709] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [285.737095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [285.738632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [285.740095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [285.741825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [285.743486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [285.745373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [285.746963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [285.748533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [285.750096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [285.751421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [285.752720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [285.754110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [285.755281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [285.756604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [285.757795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [285.759234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [285.760827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [285.762476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [285.763947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [285.765400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [285.766813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [285.768145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [285.769242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [285.770473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [285.771533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [285.772823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [285.773955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [285.775181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [285.776373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [285.777510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [285.778846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [285.780307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [285.781792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [285.783251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [285.784675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [285.786134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [285.787676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [285.789161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [285.790694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [285.792191] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [285.794007] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [285.795503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [285.796996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [285.798478] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [285.799982] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [285.801453] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [285.802923] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [285.804691] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [285.806375] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [285.807890] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [285.809411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [285.810927] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [285.812430] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [285.813935] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [285.815460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [285.816954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [285.818470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [285.819976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [285.821502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [285.822983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [285.824473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [285.825688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [285.827160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [285.828610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [285.830090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [285.831541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [285.833006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [285.834459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [285.835723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [285.836993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [285.838090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [285.838941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [285.839601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [285.840324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [285.841196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [285.842051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [285.842865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [285.843534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [285.844262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.845069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.845735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [285.846441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.847345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [285.847938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [285.848500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [285.849048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [285.849616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [285.850165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [285.850732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [285.851264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [285.851882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [285.852543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [285.853146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.853732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.854282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [285.854881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [285.855378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [285.855938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [285.856454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [285.856989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [285.857454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [285.857912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [285.869860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [285.878951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [285.879274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [285.879776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [285.880490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [285.881174] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [285.881976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [285.882283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [285.882580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [285.882930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [285.883258] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [285.883512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [285.883787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [285.884085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [285.884346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [285.884806] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [285.885113] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [285.885525] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [285.885975] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (97 ms remaining) <7> [285.991189] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [286.062554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.063929] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [286.065187] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [286.114148] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [286.115290] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [286.116362] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [286.117532] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [286.267622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.269100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.270630] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [286.273695] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [286.275015] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [286.282033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.282928] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [286.286140] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [286.287485] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [286.288674] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [286.293450] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [286.294624] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [286.295895] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [286.300232] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [286.301511] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [286.302825] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [286.306666] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [286.307837] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [286.310129] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [286.313190] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [286.314386] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [286.316276] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [286.328980] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [286.334225] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [286.335583] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [286.339898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [286.341724] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [286.345657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <6> [286.347235] [IGT] i915_pm_rpm: starting subtest module-reload <7> [286.347235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.348907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.350518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.352021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.352057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.353489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.359289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.359330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.360918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [286.366711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [286.368582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.370002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.371561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.373063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.373101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.374496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.380377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.380419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.500327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.501170] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [286.513928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.539344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.539849] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [286.552958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.592443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.597535] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [286.608312] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.608943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.609491] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.610094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.610636] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.612133] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.612685] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.613260] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.614151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.615336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.705445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.706214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.706550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.706897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.708406] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [286.708527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [286.709017] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [286.709454] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.709860] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.710305] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.711295] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [286.729295] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [286.729982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [286.730461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [286.730936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [286.731429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [286.731940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [286.732462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [286.733034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [286.733501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [286.733981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [286.734463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [286.734939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [286.735419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [286.735917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [286.736444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [286.737130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [286.737591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [286.738131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [286.738583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [286.739045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [286.739486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [286.739933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [286.740372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [286.740836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [286.741378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [286.741870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [286.742323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [286.742768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [286.743216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [286.743638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [286.744127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [286.744561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [286.745069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [286.745537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [286.746000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [286.746448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [286.746946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [286.747537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [286.748158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [286.748767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [286.749364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [286.749960] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [286.750672] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [286.751340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [286.752172] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [286.752727] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [286.753280] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [286.753814] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [286.754339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [286.754900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [286.755417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [286.755953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [286.757079] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [286.966959] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [286.969063] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [286.983973] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [286.984355] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [286.985189] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [286.985617] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [286.986376] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [287.038170] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.038275] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.039344] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [287.040157] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [287.040681] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.040810] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [287.043378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [287.043983] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [287.045717] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [287.048555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [287.050051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [287.051562] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [287.053150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [287.054710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [287.056352] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [287.058027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [287.059648] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [287.061185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [287.062838] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [287.065379] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [287.127620] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [287.174932] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [287.211921] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [287.225402] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [287.237500] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [287.245335] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [287.279319] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (261 ms remaining) <7> [287.543186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [287.565065] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [288.284691] [IGT] Reloading i915 w/o display <5> [289.215536] Setting dangerous option force_probe - tainting kernel <6> [289.227601] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [289.229403] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [289.229892] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [289.230197] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [289.230509] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [289.230890] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [289.231534] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [289.231980] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [289.233255] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [289.233703] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [289.234105] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [289.234503] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [289.234517] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [289.235441] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [289.235497] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [289.235982] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [289.236410] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252cfff], io: n/a <7> [289.236816] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [289.237864] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [289.238368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [289.238830] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [289.239261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [289.239706] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [289.247864] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [289.248195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [289.248492] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [289.248811] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [289.249262] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.249742] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.250191] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [289.250663] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.251151] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.251614] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [289.252090] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [289.252560] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [289.253018] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [289.253474] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [289.253924] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [289.254360] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [289.255408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [289.255890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [289.256341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [289.256796] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [289.257241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [289.257686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [289.258147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [289.258593] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [289.259050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [289.259497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [289.259957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [289.260400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [289.260847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [289.261279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [289.261723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [289.262167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.262609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.263072] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [289.263503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.263950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [289.264380] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.264823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [289.265250] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.265682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [289.266141] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [289.266600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.267151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [289.267616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [289.268078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.268514] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [289.268959] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [289.269392] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [289.269962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.270404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.270864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.271320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.271892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.272336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.273266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.273726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.274995] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [289.276457] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [289.276959] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [289.277416] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [289.277882] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [289.279514] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [289.280414] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [289.280927] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [289.281486] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [289.281946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [289.282380] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [289.282861] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [289.283299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [289.283756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [289.284191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [289.284623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [289.285070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [289.285508] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [289.285990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [289.286424] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [289.286872] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [289.287303] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [289.287751] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [289.288187] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [289.288627] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [289.297126] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [289.301288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.301858] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [289.302336] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [289.308874] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [289.309357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [289.309835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [289.310271] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [289.310995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [289.311437] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [289.311905] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [289.312335] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [289.312799] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [289.313239] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [289.314130] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [289.314598] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.315025] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.315425] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.315750] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.316059] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.316394] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.316949] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [289.317273] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.317609] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.327869] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.328231] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [289.328531] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [289.538618] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.539556] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [289.542243] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [289.546434] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [289.565990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.566047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [289.566085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [289.566662] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.568337] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.570435] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [289.572941] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [289.575129] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [289.578151] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.580132] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.581813] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.583542] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.585070] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.586889] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.590003] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [289.592066] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [289.597020] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.598756] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [289.600402] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [289.602753] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [289.603761] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [289.606115] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.607118] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [289.608212] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [289.610832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [289.612175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [289.613389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [289.614118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [289.615006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [289.616013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [289.616894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [289.617645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [289.618262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [289.618958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [289.619733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [289.620483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [289.621297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [289.621948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [289.622447] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [289.623174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [289.623883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [289.624652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [289.625375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [289.625860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [289.626325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [289.626973] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [289.627603] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [289.628263] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [289.628866] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [289.629449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [289.629994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [289.630515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [289.631054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [289.631557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [289.632028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [289.632575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [289.633038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [289.633491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [289.633944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [289.634408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [289.634780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [289.635167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [289.635512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [289.635941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [289.636327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [289.636669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [289.637068] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.637416] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.637801] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.638328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [289.638774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [289.639152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [289.639516] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [289.639971] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [289.640280] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [289.640604] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [289.641000] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [289.643515] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [289.643875] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [289.644181] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [289.665087] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [289.665574] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [289.665993] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [289.666400] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [289.666918] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [289.667355] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [289.667897] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [289.668328] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [289.668802] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [289.669232] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [289.669660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [289.670103] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [289.670531] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [289.670971] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [289.671399] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [289.671840] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [289.672269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [289.672714] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [289.673147] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [289.673924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [289.674366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [289.674847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [289.675573] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [289.676508] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [289.677210] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [289.677911] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [289.683590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [289.685171] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [289.685586] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [289.686521] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [289.689214] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [289.689336] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [289.690796] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [289.693207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [289.693374] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [289.696505] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [289.696656] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [289.699516] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [289.702384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [289.702548] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [289.704162] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [289.704294] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [289.710105] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [289.744322] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [289.757126] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [289.758859] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [289.764313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [289.764848] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.765316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [289.765777] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.766222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [289.766651] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.767565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [289.768027] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [289.768482] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [289.769479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [289.769961] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [289.770395] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [289.770864] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [289.771587] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [289.772617] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [289.772797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [289.772813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [289.773251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected <7> [289.773273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [289.773284] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2 <7> [289.773312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [289.773324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [289.773772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [289.773794] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [289.773929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [289.773942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [289.774366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [289.774380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [289.774391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [289.774843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [289.774856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [289.774867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [289.775291] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [289.775303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [289.775312] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [289.775321] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [289.775329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [289.775337] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [289.775345] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [289.775403] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [289.775425] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [289.775537] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [289.775553] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [289.778023] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [289.778534] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [289.779004] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [289.779452] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [289.779940] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [289.780396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [289.780873] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [289.781332] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [289.781806] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [289.782262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [289.782756] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [289.783208] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [289.783665] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [289.784160] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [289.784615] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [289.785107] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [289.785556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [289.786031] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [289.786482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [289.786953] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [289.787405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [289.787873] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [289.788517] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [289.788660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [289.788674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [289.789144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [289.789160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [289.789171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [289.789600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [289.789613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [289.789625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [289.790076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [289.790089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [289.790100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [289.790527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [289.790540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [289.790551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [289.791001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [289.791017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [289.791026] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [289.791036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [289.791044] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [289.791053] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [289.791062] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [289.791127] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [289.791148] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [289.791252] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [289.791286] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [289.791460] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [289.792611] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [289.793093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [289.793444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [289.793809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [289.794190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [289.794520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.795831] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [289.796257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [289.796653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [289.797098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [289.797486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [289.797916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [289.798308] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [289.798756] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [289.799153] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [289.799535] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [289.799961] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [289.800347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [289.800771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [289.801159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [289.801546] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [289.801967] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [289.802356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [289.802782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [289.803173] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [289.803562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [289.803987] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [289.804374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [289.804789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [289.805177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [289.805567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [289.805981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [289.806366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [289.806770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [289.807159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [289.807545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [289.807953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [289.808337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [289.808742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [289.809129] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [289.809518] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [289.809931] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [289.810318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [289.810731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [289.811120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [289.811513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [289.811925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [289.812307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [289.812706] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [289.813088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [289.813467] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [289.813865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [289.814246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [289.814626] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [289.815024] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [289.815401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [289.815800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [289.816183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [289.816567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [289.816972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [289.817354] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [289.817765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [289.818154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [289.818542] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [289.818953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [289.819337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [289.819743] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [289.820134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [289.820535] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [289.820540] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [289.820544] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [289.838319] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [289.839073] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [289.839645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.840566] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.842803] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [289.871880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.872321] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.872796] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.873179] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.873608] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.874039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.874436] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.874909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.875297] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [289.902345] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [289.919327] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [289.921430] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [291.011011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.129914] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off <7> [292.131010] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [292.132072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [292.132758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [292.133068] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [292.133182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [292.133518] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [292.133974] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [292.134127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [292.134894] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [292.134903] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [292.141803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [292.268885] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [292.294853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [292.302852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [292.303265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [292.303572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [292.303669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [292.304000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [292.304455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [292.304625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [292.305153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.305287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [292.305748] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.318827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.319212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [292.319522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [292.319864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [292.320596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [292.430946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [292.431380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [292.432272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [292.432930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.434463] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.441372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.441774] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.442038] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.442300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.442561] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.442839] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.443134] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.443396] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.443863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.444611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.445417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [292.445827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [292.446204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [292.446995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [292.521753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [292.522177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [292.522959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [292.523799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.524524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.525020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [292.525532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [292.526079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [292.526689] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [292.563924] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [292.580021] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [292.588264] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [292.592176] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [292.606045] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [292.613961] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [292.637772] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [292.638132] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [292.647804] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [293.241544] [IGT] Reloading i915 as normal <5> [294.167593] Setting dangerous option force_probe - tainting kernel <6> [294.179562] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [294.181187] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [294.181683] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [294.182033] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [294.182328] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [294.182698] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [294.183185] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [294.183483] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [294.184556] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [294.184886] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [294.185170] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [294.185434] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [294.185445] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [294.186140] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [294.186180] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [294.186483] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [294.186795] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252cfff], io: n/a <7> [294.187098] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [294.187941] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [294.188284] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [294.188574] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [294.188882] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [294.189187] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [294.197676] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [294.197999] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [294.198287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [294.198575] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [294.198908] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [294.199338] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [294.199772] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [294.200191] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [294.200589] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [294.200914] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [294.201264] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [294.201588] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [294.202020] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [294.202434] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [294.202860] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [294.203273] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [294.204350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [294.204826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [294.205256] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [294.205700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [294.206114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [294.206431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [294.206764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [294.207105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [294.207412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [294.207760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [294.208116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [294.208422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [294.208752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [294.209100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [294.209397] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [294.209788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [294.210218] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [294.210659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [294.211077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [294.211437] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [294.211752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [294.212053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [294.212467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [294.212896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [294.213318] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [294.213774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [294.214197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [294.214519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [294.214860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [294.215285] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [294.215714] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [294.216133] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [294.216658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.216962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.217264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [294.217711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.218236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.218672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [294.219061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [294.219365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [294.220491] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [294.221900] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [294.222353] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [294.222369] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [294.222841] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [294.223236] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [294.223240] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [294.224119] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [294.224495] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <6> [294.224724] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [294.224865] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [294.225180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [294.225501] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [294.225918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [294.226321] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [294.226729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [294.227134] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [294.227516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [294.227908] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [294.228225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [294.228533] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [294.228843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [294.229176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [294.229467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [294.229772] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [294.234644] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [294.238579] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [294.239101] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [294.239556] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [294.247618] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [294.248099] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [294.248534] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [294.248942] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [294.249386] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [294.249845] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [294.250273] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [294.250719] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [294.251153] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [294.251554] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [294.252138] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [294.252622] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [294.253021] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [294.253426] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [294.253930] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [294.254334] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [294.254798] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [294.255485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [294.255933] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [294.256377] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [294.266668] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.267061] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [294.267353] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [294.472563] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [294.473470] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [294.476650] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [294.481426] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [294.499061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [294.499106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [294.499129] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [294.499470] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.500824] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.502709] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [294.505001] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [294.506867] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [294.509323] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [294.510762] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [294.512315] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [294.514047] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [294.515829] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [294.517652] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [294.520550] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [294.522543] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [294.528029] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [294.529509] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [294.531273] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [294.535193] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [294.537053] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [294.540343] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [294.541633] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [294.542748] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [294.545178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [294.546415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [294.547632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [294.548289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [294.549041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [294.549820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [294.550584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [294.551534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [294.552461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [294.553404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [294.554292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [294.555083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [294.555841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [294.556413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [294.556903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [294.557443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [294.557995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [294.558588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [294.559192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [294.559857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [294.560505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [294.561246] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [294.561986] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [294.562506] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [294.563185] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [294.564086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [294.564894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [294.565572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [294.566194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [294.566742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [294.567134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [294.567520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [294.567941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [294.568384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [294.568793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [294.569289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [294.569755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [294.570176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [294.570564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [294.571000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [294.571442] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [294.571853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [294.572293] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.572786] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.573219] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [294.573857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [294.574241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [294.574574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [294.574927] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [294.575390] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [294.575792] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [294.576142] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [294.576484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [294.578943] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [294.579343] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [294.579731] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [294.599900] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [294.600230] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [294.600495] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [294.600783] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [294.601153] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [294.601571] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [294.602131] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [294.602528] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [294.602902] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [294.603236] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [294.603541] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [294.603894] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [294.604242] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [294.604540] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [294.604897] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [294.605253] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [294.605618] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [294.605951] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [294.606255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [294.606812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [294.607133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [294.607424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [294.607948] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [294.608686] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [294.609148] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [294.609755] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [294.616474] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [294.620158] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [294.620765] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes <7> [294.621811] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1 <7> [294.624372] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [294.624497] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [294.625724] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1 <7> [294.627524] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [294.627670] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [294.628786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [294.628900] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [294.630394] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2 <7> [294.632916] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [294.633069] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [294.634468] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [294.634616] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 <7> [294.640205] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [294.677624] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [294.692252] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [294.695494] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [294.701360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [294.702774] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [294.703271] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [294.703722] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [294.704153] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [294.706141] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.706524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [294.706948] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [294.708272] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [294.708922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.709290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.709900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.710259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.710268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.710574] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.715524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.715538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.716377] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.716874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [294.721471] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.722019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [294.723656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.724111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.724728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.725207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.725218] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.727576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.733072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.733086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.733676] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [294.734811] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [294.737013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [294.737031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [294.737886] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [294.738253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [294.738611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [294.738987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [294.738997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [294.739004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [294.739034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [294.739381] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [294.739738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [294.744826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected <7> [294.745110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [294.745120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.745132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.745145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [294.745157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [294.745910] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [294.749817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [294.749839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [294.749851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [294.751678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.752213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.753535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.756972] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.756987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.757479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.761562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.761577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.762147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [294.762165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [294.762177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [294.766742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [294.766762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [294.766774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [294.767527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.767987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.768621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.769086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.769097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.769518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.772981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.772994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.773490] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [294.773505] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [294.773514] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [294.773523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [294.773531] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [294.773538] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [294.773644] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [294.773681] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [294.773690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [294.773722] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [294.773856] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [294.773911] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [294.780776] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [294.785498] fbcon: i915drmfb (fb0) is primary device <6> [294.789525] Console: switching to colour frame buffer device 200x56 <6> [294.789545] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [294.789561] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [294.790103] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [294.790556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [294.790775] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [294.790792] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [294.791039] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [294.791517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [294.791490] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [294.791541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [294.791943] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [294.792243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [294.792390] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [294.792682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [294.792750] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [294.793072] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [294.793110] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [294.793392] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [294.793790] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [294.794186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [294.794200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [294.794218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [294.794241] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [294.794279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [294.794721] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [294.794911] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [294.795166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [294.795344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [294.795645] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [294.796094] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [294.796546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [294.797038] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [294.797488] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [294.797966] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [294.798420] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [294.798914] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [294.799130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [294.799152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.799164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.799177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [294.799188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [294.801043] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [294.801548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [294.802052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [294.802522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [294.802980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [294.803437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.804223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [294.804243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [294.804235] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [294.804256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [294.804641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [294.805013] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [294.805225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.805399] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [294.805779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [294.805908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.806158] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [294.806538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [294.806526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.807079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.806959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [294.807091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.807343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [294.807512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.807738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [294.808109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [294.808489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [294.808916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [294.809293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [294.809702] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [294.810079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [294.810460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [294.810883] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [294.811273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [294.811696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [294.812083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [294.812472] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [294.812866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [294.813243] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [294.813643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [294.814192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.814027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [294.814207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.814413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [294.814718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [294.814735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [294.814746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [294.814818] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [294.815205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [294.815605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [294.815983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [294.816362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [294.816775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [294.817157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [294.817541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [294.817951] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [294.818330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [294.818728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [294.819280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [294.819301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [294.819117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [294.819313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [294.819499] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [294.819901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [294.820025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.820290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [294.820465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.820688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [294.821076] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [294.821467] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [294.821869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [294.822258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [294.822681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [294.822671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.823130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.823067] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [294.823141] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.823452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [294.823555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.823847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [294.824228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [294.824641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [294.825057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [294.825443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [294.825847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [294.826245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [294.826660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [294.827044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [294.827423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [294.827821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [294.828199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [294.828602] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [294.828607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [294.828611] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [294.829404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.829419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.829879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [294.829895] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [294.829905] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [294.829913] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [294.829921] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [294.829928] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [294.830216] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [294.830249] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [294.830255] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [294.830312] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [294.832465] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [294.833198] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [294.833668] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [294.834132] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [294.834616] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [294.835067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [294.835542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [294.836065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [294.836537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [294.837025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [294.837499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [294.838002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [294.838468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.838984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [294.839459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.839956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.840421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.840916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.841389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.841869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.842335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.842808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.843272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [294.843748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.844217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.844697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [294.845169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.845646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.846114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.846581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.847061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.847530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.847962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.848365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.848756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [294.849171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.849582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [294.850002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [294.850414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [294.850835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [294.851248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state <7> [294.851669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [294.852055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.852449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [294.852852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.853250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [294.853657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [294.854061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [294.854464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [294.854880] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [294.856127] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [294.856559] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [294.856986] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [294.857390] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [294.857812] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [294.858222] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [294.858630] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [294.859411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [294.859913] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [294.860331] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.860750] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [294.861145] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [294.861551] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [294.861963] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [294.862356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [294.862764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [294.863158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [294.863556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [294.863974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [294.864382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [294.864791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [294.865192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [294.865578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [294.865996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [294.866405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [294.866808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [294.867209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [294.867618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [294.868018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [294.868419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [294.868828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [294.869230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [294.869644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [294.870050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [294.870476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <6> [294.871060] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [294.870883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [294.871273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [294.871675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [294.872079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.872478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.872892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.873297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.873705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.874095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [294.874490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [294.874911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [294.875321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [294.875728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [294.876137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.876546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [294.876962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [294.877371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [294.877795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.878201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.878626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.879013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [294.879418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [294.879818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [294.880222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [294.880631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [294.881028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [294.881428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [294.883800] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [294.885385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [294.885841] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [294.886259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [294.886696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [294.887070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [294.887459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [294.887880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [294.888272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [294.888686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [294.890294] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [294.890764] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [294.891507] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [294.892054] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [294.892499] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [294.902640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.902977] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [294.903291] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [295.105481] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [295.106220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [295.108069] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [295.111029] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [295.112181] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [295.114326] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [295.115229] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [295.116134] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [295.119346] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [295.120518] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [295.121671] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [295.124994] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [295.126143] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [295.127752] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [295.132067] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [295.133733] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [295.138190] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [295.141735] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [295.143375] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [295.145688] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [295.150786] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 368 us, max time under evasion is 250 us <7> [295.158663] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [295.166134] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [295.168385] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [295.171956] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [295.181136] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [295.182466] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [295.182855] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [295.182892] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [295.183340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [295.183016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [295.183397] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [295.187912] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [295.188530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [295.190307] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [295.192023] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [295.196888] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.196940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [295.196975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [295.197128] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [295.198832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [295.200636] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [295.204269] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [295.209971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [295.210024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [295.210073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [295.210125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [295.210173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [295.216578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [295.216662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [295.216692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [295.221319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.222408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.225658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.226554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.226576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.228678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.234370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.234396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.235428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [295.235453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [295.235471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [295.240949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [295.240978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [295.240996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [295.241998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.242621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.243391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.244211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.244227] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.245030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.249033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.249051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.249653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [295.249671] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [295.249684] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [295.249694] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [295.249704] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [295.249714] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [295.249801] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [295.249840] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [295.249851] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [295.249909] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [295.250219] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [295.251638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [295.251654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [295.252475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [295.252926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [295.253356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [295.253886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.253898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [295.253906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [295.253945] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [295.254371] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [295.254819] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [295.256920] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.257210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [295.257223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [295.257235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [295.257383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [295.257403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [295.257398] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.258453] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.258934] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.259339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.259863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.260288] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.260785] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.261205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.261982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [295.262116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [295.262127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [295.263090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.263738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.264266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.265005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.265017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.265449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.268781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.268794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.269245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [295.269377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [295.269389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [295.273936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [295.274078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [295.274089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [295.274823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.275238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.275827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.276277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.276287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.276863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.280652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.280666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.281152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [295.289105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [295.289122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <6> [295.291761] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [295.293713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [295.296398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [295.296415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [295.297261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.297659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <6> [295.297857] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [295.298438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.298995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.299007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.299453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.304991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.305019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.305390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [295.306352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [295.306365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [295.310891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [295.311864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [295.311875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [295.312439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.312758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.313226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.313520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.313527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.313846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.317117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.317127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.317454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [295.318072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [295.318082] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [295.318411] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [295.318772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [295.319150] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [295.319601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.319612] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [295.319620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <6> [295.319775] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [295.319655] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [295.320048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [295.320424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [295.321752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [295.321764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [295.321776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [295.321825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [295.321835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [295.326374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [295.326433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [295.326445] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [295.327417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.327808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [295.328384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [295.330616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.330629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.331030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [295.334677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [295.334693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [295.335159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [295.335213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [295.335224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [295.340686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [295.340746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [295.340757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [295.341455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.341964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [295.344172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [295.344659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.344670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [295.345075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [295.348722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [295.348851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [295.349355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [295.350433] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142] <7> [296.396018] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [296.396544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [296.397812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [296.398572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [296.398998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [296.399423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [296.399874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [296.400300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [296.400740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [296.401167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [296.401643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [296.402072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [296.402499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [296.402938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [296.403367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [296.403807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [296.404237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [296.404686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [296.405120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [296.405547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [296.405992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [296.406428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [296.406870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [296.407315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [296.407769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [296.408200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [296.408641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [296.409071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [296.409503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [296.409943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [296.410378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [296.410829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [296.411275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [296.411719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [296.412144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [296.412586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [296.413000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [296.413419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [296.413857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [296.414265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [296.414696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [296.415117] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [296.415603] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [296.416056] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [296.416463] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [296.416882] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [296.417289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.417709] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.418123] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [296.418624] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [296.419081] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [296.419536] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [296.419966] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [296.420382] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [296.420813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [296.421226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [296.421665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [296.422080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [296.422741] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [296.424600] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [296.481519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [296.630797] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [296.632959] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [296.644865] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [296.645419] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [296.645907] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [296.646485] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [296.647030] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [296.699130] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [296.699170] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [296.700305] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [296.700922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [296.701622] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [296.703919] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [296.704323] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [296.705351] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [296.706225] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [296.707923] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [296.711303] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [296.713053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [296.714514] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [296.715938] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [296.717366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [296.718759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [296.720403] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [296.721834] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [296.723260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [296.724691] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [296.727303] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [296.731381] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [296.732998] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [296.831039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [296.833179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.834877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.837082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.841910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.859753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.950339] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [296.951725] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [296.952883] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [296.954509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [296.956288] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [296.957648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [296.959124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [296.960450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [296.961990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [296.963255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [296.964946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [296.966612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [296.968106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.969612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [296.971083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.972343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.973756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.975010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.976323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.977386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.978618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.979812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.981228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [296.982742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.984399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [296.985918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [296.987381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [296.988859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [296.990324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [296.991538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [296.992782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [296.993912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [296.995118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [296.996172] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [296.997370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [296.998589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [296.999909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [297.001320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [297.002788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [297.004255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [297.005707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [297.007027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [297.008295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [297.009396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [297.010706] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [297.011985] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [297.013133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [297.014158] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [297.015352] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [297.016774] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [297.017988] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [297.019057] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [297.020464] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [297.021704] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [297.022954] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [297.024012] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [297.025260] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [297.026459] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [297.027944] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [297.029413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [297.030850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [297.032305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [297.033605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [297.034847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [297.036327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [297.037787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [297.039236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [297.040705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [297.041967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [297.043017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [297.044238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [297.045312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [297.046505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [297.047629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [297.048855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [297.049937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [297.051285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [297.052514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [297.053725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [297.054902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [297.056158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [297.057253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [297.058486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [297.059707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.061087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [297.062215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [297.063443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [297.064527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [297.065735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [297.066540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [297.067261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [297.068092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [297.068884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [297.069671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [297.070337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [297.071044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [297.071855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [297.072520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [297.073254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [297.074136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [297.074978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [297.075543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [297.076075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [297.076696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [297.077190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [297.077741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [297.078314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [297.090660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [297.100860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [297.101227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [297.101815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [297.102599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [297.103501] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [297.104274] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [297.104655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [297.104992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [297.105287] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [297.105623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [297.105952] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [297.106234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [297.106515] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [297.106817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [297.107327] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [297.107710] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [297.108241] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [297.108661] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining) <7> [297.206804] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [297.216695] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [297.217215] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [297.217794] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [297.267151] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [297.268296] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [297.269366] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [297.270533] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [297.426613] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [297.428164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [297.429832] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [297.433136] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [297.434883] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [297.442331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [297.443632] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [297.448079] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [297.449860] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [297.451537] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [297.455672] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [297.457301] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [297.458940] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [297.463459] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [297.465135] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [297.466819] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [297.471217] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [297.472824] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [297.474356] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [297.478773] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [297.480423] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [297.483291] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [297.486841] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [297.488469] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [297.490772] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [297.495889] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 376 us, max time under evasion is 250 us <7> [297.502707] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [297.509287] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [297.511235] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [297.516789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [297.518160] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [297.524115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [297.526326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.527832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [297.529475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [297.530921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.530956] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.532308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [297.537999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [297.538040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [297.542466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [297.548318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [297.550240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.551707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [297.553251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [297.554739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.554775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [297.556235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [297.560878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [297.560905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [297.654128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.655613] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.668733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.694298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.694786] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.707586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.786379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.788138] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [297.798291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.798933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.799469] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [297.800299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.801142] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.801915] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [297.802737] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.803495] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.804280] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [297.806830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [297.903074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [297.905305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [297.906614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [297.907943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [297.917271] Console: switching to colour dummy device 80x25 <7> [297.919881] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [297.920328] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [297.922304] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [297.923955] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.925730] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.927451] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [297.930098] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [297.953101] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [297.975581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [297.976884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [297.978251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [297.979684] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [297.980929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [297.982308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [297.983600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [297.985096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [297.986484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [297.988058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [297.989768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [297.991426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [297.993078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [297.994606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [297.995782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [297.997119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [297.998604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [298.000040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [298.001516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [298.002967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [298.004358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [298.005613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [298.007036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [298.008481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [298.009936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [298.011384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [298.012565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [298.013286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [298.014016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [298.014760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [298.015423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [298.016176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [298.016927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [298.017661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [298.018358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [298.019083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [298.019829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [298.020493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [298.021191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [298.021779] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [298.022464] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [298.023218] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [298.023814] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [298.024410] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [298.024961] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [298.025563] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [298.026061] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [298.026593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [298.027282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [298.027858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [298.028571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [298.030110] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [298.238830] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [298.241290] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [298.256389] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [298.257633] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [298.258820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [298.260227] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [298.261814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [298.312979] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [298.314298] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [298.315520] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [298.316885] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [298.319239] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [298.320015] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [298.320971] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [298.322370] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [298.324122] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [298.326374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [298.328244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [298.330212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [298.332133] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [298.333940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [298.335843] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [298.337430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [298.339084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [298.340501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [298.342150] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [298.345119] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [298.415690] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [298.462050] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [298.480225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [298.484667] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [298.501315] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [298.508053] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [298.536826] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (282 ms remaining) <7> [298.823168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [298.834725] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [299.566668] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [299.568172] [IGT] i915_pm_rpm: exiting, ret=0

<6> [284.052841] Console: switching to colour dummy device 80x25

<7> [284.057530] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [284.058300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [284.058312] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [284.058943] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.059298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.059643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.060032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.060047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [284.060056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [284.060091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [284.060377] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.060755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.063546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [284.063558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.063569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.063753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [284.063765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [284.068305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [284.068398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [284.068406] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [284.069769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.070267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.070819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.071231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.071239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.071539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.074780] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.074805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.075213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [284.075343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [284.075354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [284.079923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [284.080063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [284.080074] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [284.080753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.081157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.081748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.082209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.082218] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.082600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.085865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.085877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.086313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [284.096447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [284.096461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [284.101081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [284.102085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [284.102098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [284.102834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.103230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.103826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.104266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.104276] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.104665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.107962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.107973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.108402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [284.109430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [284.109443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [284.113972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [284.114967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [284.114980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [284.115681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.116087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.116603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.117032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.117042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.117426] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.120704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.120714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.121150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [284.121968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [284.121980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [284.122424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.122779] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.123174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.123605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.123616] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [284.123623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [284.123658] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [284.124070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.124446] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.125620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [284.125630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.125637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.125671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [284.125678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [284.130088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [284.130122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [284.130129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [284.130645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.130936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.131463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.131875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.131884] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.132234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.135436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.135444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.135755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [284.135804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [284.135814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [284.140243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [284.140276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [284.140284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [284.140815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.141177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.141719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.142153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.142162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.142523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.145656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.145664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.146055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [284.146656] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [284.311186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [285.189312] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [285.189481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [285.189844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [285.190190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [285.190497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [285.190827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [285.191154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [285.191463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [285.191757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [285.192101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [285.192408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [285.192705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [285.193019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [285.193330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [285.193625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [285.193939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [285.194254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [285.194548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [285.194892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [285.195198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [285.195494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [285.195809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [285.196121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [285.196412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [285.196707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [285.197029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [285.197350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [285.197703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [285.198061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [285.198403] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [285.198731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [285.199087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [285.199429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [285.199760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [285.200115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [285.200453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [285.200753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [285.201087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [285.201401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [285.201695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [285.202013] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [285.202324] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [285.202659] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [285.202996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [285.203292] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [285.203578] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [285.203917] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [285.204255] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [285.204543] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [285.204964] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [285.205316] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [285.205645] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [285.205976] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [285.206321] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [285.206623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [285.206946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [285.207301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [285.207627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [285.208137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [285.209864] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [285.415182] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [285.417348] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [285.424937] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [285.425995] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [285.426994] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [285.428814] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [285.430289] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [285.481344] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [285.481403] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [285.482905] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [285.483476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [285.484315] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [285.485753] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [285.486721] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [285.487185] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [285.488659] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [285.490220] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [285.493286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [285.494839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [285.496276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [285.497711] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [285.499132] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [285.500587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [285.502018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [285.503087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [285.504429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [285.505860] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [285.508517] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [285.511192] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [285.512520] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [285.615252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [285.617342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [285.619026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [285.621172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [285.625715] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [285.642992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [285.728699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [285.730020] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [285.731197] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [285.733019] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [285.734709] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [285.737095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [285.738632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [285.740095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [285.741825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [285.743486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [285.745373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [285.746963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [285.748533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [285.750096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [285.751421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [285.752720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [285.754110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [285.755281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [285.756604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [285.757795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [285.759234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [285.760827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [285.762476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [285.763947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [285.765400] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [285.766813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [285.768145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [285.769242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [285.770473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [285.771533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [285.772823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [285.773955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [285.775181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [285.776373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [285.777510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [285.778846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [285.780307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [285.781792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [285.783251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [285.784675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [285.786134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [285.787676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [285.789161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [285.790694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [285.792191] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [285.794007] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [285.795503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [285.796996] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [285.798478] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [285.799982] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [285.801453] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [285.802923] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [285.804691] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [285.806375] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [285.807890] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [285.809411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [285.810927] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [285.812430] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [285.813935] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [285.815460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [285.816954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [285.818470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [285.819976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [285.821502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [285.822983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [285.824473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [285.825688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [285.827160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [285.828610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [285.830090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [285.831541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [285.833006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [285.834459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [285.835723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [285.836993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [285.838090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [285.838941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [285.839601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [285.840324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [285.841196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [285.842051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [285.842865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [285.843534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [285.844262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.845069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.845735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [285.846441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.847345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [285.847938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [285.848500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [285.849048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [285.849616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [285.850165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [285.850732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [285.851264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [285.851882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [285.852543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [285.853146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.853732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.854282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [285.854881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [285.855378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [285.855938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [285.856454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [285.856989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [285.857454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [285.857912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [285.869860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [285.878951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [285.879274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [285.879776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [285.880490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [285.881174] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [285.881976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [285.882283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [285.882580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [285.882930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [285.883258] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [285.883512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [285.883787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [285.884085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [285.884346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [285.884806] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [285.885113] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [285.885525] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [285.885975] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (97 ms remaining)

<7> [285.991189] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [286.062554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.063929] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [286.065187] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [286.114148] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [286.115290] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [286.116362] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [286.117532] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [286.267622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.269100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.270630] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [286.273695] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.275015] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [286.282033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.282928] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [286.286140] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [286.287485] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [286.288674] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [286.293450] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [286.294624] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [286.295895] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [286.300232] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [286.301511] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [286.302825] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [286.306666] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [286.307837] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [286.310129] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [286.313190] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [286.314386] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [286.316276] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [286.328980] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [286.334225] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [286.335583] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [286.339898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [286.341724] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [286.345657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<6> [286.347235] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [286.347235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.348907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.350518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.352021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.352057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.353489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.359289] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.359330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.360918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [286.366711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [286.368582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.370002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.371561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.373063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.373101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.374496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.380377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.380419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.500327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.501170] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [286.513928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.539344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.539849] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [286.552958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.592443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.597535] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [286.608312] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.608943] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.609491] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.610094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.610636] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.612133] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.612685] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.613260] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.614151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.615336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.705445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.706214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.706550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.706897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.708406] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [286.708527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [286.709017] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [286.709454] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.709860] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.710305] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.711295] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [286.729295] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [286.729982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [286.730461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [286.730936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [286.731429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [286.731940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [286.732462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [286.733034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [286.733501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [286.733981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [286.734463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [286.734939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [286.735419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [286.735917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [286.736444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [286.737130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [286.737591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [286.738131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [286.738583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [286.739045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [286.739486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [286.739933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [286.740372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [286.740836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [286.741378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [286.741870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [286.742323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [286.742768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [286.743216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [286.743638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [286.744127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [286.744561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [286.745069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [286.745537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [286.746000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [286.746448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [286.746946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [286.747537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [286.748158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [286.748767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [286.749364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [286.749960] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [286.750672] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [286.751340] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [286.752172] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [286.752727] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [286.753280] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [286.753814] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [286.754339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [286.754900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [286.755417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [286.755953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [286.757079] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [286.966959] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [286.969063] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [286.983973] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [286.984355] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [286.985189] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [286.985617] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [286.986376] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [287.038170] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.038275] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.039344] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [287.040157] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [287.040681] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.040810] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [287.043378] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [287.043983] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [287.045717] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [287.048555] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [287.050051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [287.051562] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [287.053150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [287.054710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [287.056352] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [287.058027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [287.059648] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [287.061185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [287.062838] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [287.065379] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [287.127620] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [287.174932] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [287.211921] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [287.225402] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [287.237500] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [287.245335] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [287.279319] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (261 ms remaining)

<7> [287.543186] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [287.565065] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [288.284691] [IGT] Reloading i915 w/o display

<5> [289.215536] Setting dangerous option force_probe - tainting kernel

<6> [289.227601] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [289.229403] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [289.229892] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [289.230197] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [289.230509] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [289.230890] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [289.231534] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [289.231980] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [289.233255] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [289.233703] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [289.234105] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [289.234503] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [289.234517] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [289.235441] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [289.235497] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [289.235982] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [289.236410] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252cfff], io: n/a

<7> [289.236816] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [289.237864] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [289.238368] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [289.238830] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [289.239261] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [289.239706] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [289.247864] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [289.248195] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [289.248492] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [289.248811] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [289.249262] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.249742] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.250191] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [289.250663] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.251151] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.251614] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [289.252090] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [289.252560] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [289.253018] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [289.253474] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [289.253924] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [289.254360] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [289.255408] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [289.255890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [289.256341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [289.256796] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [289.257241] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [289.257686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [289.258147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [289.258593] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [289.259050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [289.259497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [289.259957] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [289.260400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [289.260847] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [289.261279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [289.261723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [289.262167] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.262609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.263072] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [289.263503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.263950] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [289.264380] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.264823] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [289.265250] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.265682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [289.266141] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [289.266600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.267151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [289.267616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [289.268078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.268514] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [289.268959] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [289.269392] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [289.269962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.270404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.270864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.271320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.271892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.272336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.273266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.273726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.274995] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [289.276457] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [289.276959] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [289.277416] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [289.277882] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [289.279514] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [289.280414] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [289.280927] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [289.281486] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [289.281946] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [289.282380] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [289.282861] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [289.283299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [289.283756] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [289.284191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [289.284623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [289.285070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [289.285508] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [289.285990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [289.286424] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [289.286872] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [289.287303] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [289.287751] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [289.288187] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [289.288627] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [289.297126] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [289.301288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.301858] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [289.302336] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [289.308874] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [289.309357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [289.309835] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [289.310271] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [289.310995] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [289.311437] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [289.311905] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [289.312335] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [289.312799] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [289.313239] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [289.314130] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [289.314598] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.315025] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.315425] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.315750] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.316059] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.316394] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.316949] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.317273] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.317609] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.327869] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.328231] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [289.328531] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [289.538618] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.539556] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [289.542243] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [289.546434] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [289.565990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.566047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [289.566085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [289.566662] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.568337] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.570435] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [289.572941] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [289.575129] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [289.578151] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.580132] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.581813] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.583542] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.585070] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.586889] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.590003] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [289.592066] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [289.597020] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.598756] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [289.600402] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [289.602753] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [289.603761] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [289.606115] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.607118] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [289.608212] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [289.610832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [289.612175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [289.613389] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [289.614118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [289.615006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [289.616013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [289.616894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [289.617645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [289.618262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [289.618958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [289.619733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [289.620483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [289.621297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [289.621948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [289.622447] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [289.623174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [289.623883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [289.624652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [289.625375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [289.625860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [289.626325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [289.626973] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [289.627603] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [289.628263] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [289.628866] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [289.629449] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [289.629994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [289.630515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [289.631054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [289.631557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [289.632028] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [289.632575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [289.633038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [289.633491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [289.633944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [289.634408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [289.634780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [289.635167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [289.635512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [289.635941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [289.636327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [289.636669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [289.637068] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.637416] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.637801] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.638328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [289.638774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [289.639152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [289.639516] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [289.639971] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [289.640280] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [289.640604] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [289.641000] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [289.643515] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [289.643875] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [289.644181] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [289.665087] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [289.665574] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [289.665993] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [289.666400] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [289.666918] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [289.667355] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [289.667897] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [289.668328] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [289.668802] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [289.669232] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [289.669660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [289.670103] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [289.670531] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [289.670971] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [289.671399] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [289.671840] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [289.672269] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [289.672714] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [289.673147] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [289.673924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [289.674366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [289.674847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [289.675573] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [289.676508] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [289.677210] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [289.677911] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [289.683590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [289.685171] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [289.685586] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [289.686521] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [289.689214] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [289.689336] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [289.690796] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [289.693207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [289.693374] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [289.696505] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [289.696656] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [289.699516] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [289.702384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [289.702548] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [289.704162] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [289.704294] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [289.710105] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [289.744322] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [289.757126] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [289.758859] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [289.764313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [289.764848] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.765316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [289.765777] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.766222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [289.766651] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.767565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [289.768027] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [289.768482] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [289.769479] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [289.769961] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [289.770395] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [289.770864] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [289.771587] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [289.772617] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [289.772797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [289.772813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [289.773251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected

<7> [289.773273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [289.773284] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2

<7> [289.773312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [289.773324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [289.773772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [289.773794] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [289.773929] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [289.773942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [289.774366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [289.774380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [289.774391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [289.774843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [289.774856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [289.774867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [289.775291] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [289.775303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [289.775312] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [289.775321] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [289.775329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [289.775337] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [289.775345] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [289.775403] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [289.775425] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [289.775537] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [289.775553] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [289.778023] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [289.778534] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [289.779004] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [289.779452] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [289.779940] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [289.780396] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [289.780873] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [289.781332] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [289.781806] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [289.782262] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [289.782756] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [289.783208] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [289.783665] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [289.784160] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [289.784615] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [289.785107] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [289.785556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [289.786031] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [289.786482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [289.786953] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [289.787405] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [289.787873] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [289.788517] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [289.788660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [289.788674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [289.789144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [289.789160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [289.789171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [289.789600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [289.789613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [289.789625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [289.790076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [289.790089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [289.790100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [289.790527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [289.790540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [289.790551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [289.791001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [289.791017] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [289.791026] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [289.791036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [289.791044] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [289.791053] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [289.791062] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [289.791127] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [289.791148] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [289.791252] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [289.791286] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [289.791460] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [289.792611] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [289.793093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [289.793444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [289.793809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [289.794190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [289.794520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.795831] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [289.796257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [289.796653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [289.797098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [289.797486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [289.797916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [289.798308] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [289.798756] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [289.799153] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [289.799535] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [289.799961] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [289.800347] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [289.800771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [289.801159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [289.801546] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [289.801967] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [289.802356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [289.802782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [289.803173] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [289.803562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [289.803987] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [289.804374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [289.804789] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [289.805177] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [289.805567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [289.805981] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [289.806366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [289.806770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [289.807159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [289.807545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [289.807953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [289.808337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [289.808742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [289.809129] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [289.809518] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [289.809931] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [289.810318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [289.810731] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [289.811120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [289.811513] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [289.811925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [289.812307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [289.812706] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [289.813088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [289.813467] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [289.813865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [289.814246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [289.814626] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [289.815024] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [289.815401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [289.815800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [289.816183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [289.816567] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [289.816972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [289.817354] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [289.817765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [289.818154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [289.818542] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [289.818953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [289.819337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [289.819743] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [289.820134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [289.820535] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [289.820540] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [289.820544] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [289.838319] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [289.839073] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [289.839645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.840566] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.842803] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [289.871880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.872321] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.872796] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.873179] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.873608] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.874039] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.874436] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.874909] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.875297] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [289.902345] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [289.919327] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [289.921430] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [291.011011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.129914] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off

<7> [292.131010] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [292.132072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [292.132758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [292.133068] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [292.133182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [292.133518] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [292.133974] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [292.134127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [292.134894] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [292.134903] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [292.141803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [292.268885] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [292.294853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [292.302852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [292.303265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [292.303572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [292.303669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [292.304000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [292.304455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [292.304625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [292.305153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.305287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [292.305748] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.318827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.319212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [292.319522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [292.319864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [292.320596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [292.430946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [292.431380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [292.432272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [292.432930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.434463] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.441372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.441774] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.442038] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.442300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.442561] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.442839] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.443134] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.443396] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.443863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.444611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.445417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [292.445827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [292.446204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [292.446995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [292.521753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [292.522177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [292.522959] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [292.523799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.524524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.525020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [292.525532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [292.526079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [292.526689] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [292.563924] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [292.580021] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [292.588264] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [292.592176] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [292.606045] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [292.613961] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [292.637772] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [292.638132] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [292.647804] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [293.241544] [IGT] Reloading i915 as normal

<5> [294.167593] Setting dangerous option force_probe - tainting kernel

<6> [294.179562] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [294.181187] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [294.181683] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [294.182033] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [294.182328] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [294.182698] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [294.183185] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [294.183483] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [294.184556] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [294.184886] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [294.185170] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [294.185434] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [294.185445] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [294.186140] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [294.186180] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [294.186483] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [294.186795] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7717 MiB [mem 0x00000000-0x1e252cfff], io: n/a

<7> [294.187098] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [294.187941] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [294.188284] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [294.188574] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [294.188882] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [294.189187] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [294.197676] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [294.197999] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [294.198287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [294.198575] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [294.198908] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [294.199338] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [294.199772] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [294.200191] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [294.200589] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [294.200914] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [294.201264] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [294.201588] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [294.202020] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [294.202434] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [294.202860] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [294.203273] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [294.204350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [294.204826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [294.205256] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [294.205700] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [294.206114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [294.206431] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [294.206764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [294.207105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [294.207412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [294.207760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [294.208116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [294.208422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [294.208752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [294.209100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [294.209397] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [294.209788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [294.210218] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [294.210659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [294.211077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [294.211437] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [294.211752] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [294.212053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [294.212467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [294.212896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [294.213318] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [294.213774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [294.214197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [294.214519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [294.214860] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [294.215285] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [294.215714] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [294.216133] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [294.216658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.216962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.217264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [294.217711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.218236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.218672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [294.219061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [294.219365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [294.220491] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [294.221900] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [294.222353] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [294.222369] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [294.222841] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [294.223236] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [294.223240] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [294.224119] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [294.224495] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<6> [294.224724] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [294.224865] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [294.225180] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [294.225501] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [294.225918] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [294.226321] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [294.226729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [294.227134] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [294.227516] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [294.227908] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [294.228225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [294.228533] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [294.228843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [294.229176] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [294.229467] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [294.229772] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [294.234644] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [294.238579] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [294.239101] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [294.239556] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [294.247618] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [294.248099] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [294.248534] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [294.248942] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [294.249386] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [294.249845] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [294.250273] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [294.250719] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [294.251153] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [294.251554] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [294.252138] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [294.252622] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [294.253021] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [294.253426] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [294.253930] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [294.254334] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [294.254798] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [294.255485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [294.255933] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [294.256377] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [294.266668] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.267061] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [294.267353] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [294.472563] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [294.473470] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [294.476650] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [294.481426] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [294.499061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [294.499106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [294.499129] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [294.499470] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.500824] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.502709] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [294.505001] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [294.506867] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [294.509323] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [294.510762] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [294.512315] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [294.514047] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [294.515829] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [294.517652] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [294.520550] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [294.522543] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [294.528029] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [294.529509] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [294.531273] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [294.535193] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [294.537053] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [294.540343] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [294.541633] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [294.542748] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [294.545178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [294.546415] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [294.547632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [294.548289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [294.549041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [294.549820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [294.550584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [294.551534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [294.552461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [294.553404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [294.554292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [294.555083] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [294.555841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [294.556413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [294.556903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [294.557443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [294.557995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [294.558588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [294.559192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [294.559857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [294.560505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [294.561246] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [294.561986] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [294.562506] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [294.563185] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [294.564086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [294.564894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [294.565572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [294.566194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [294.566742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [294.567134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [294.567520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [294.567941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [294.568384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [294.568793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [294.569289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [294.569755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [294.570176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [294.570564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [294.571000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [294.571442] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [294.571853] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [294.572293] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.572786] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.573219] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [294.573857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [294.574241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [294.574574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [294.574927] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [294.575390] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [294.575792] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [294.576142] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [294.576484] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [294.578943] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [294.579343] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [294.579731] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [294.599900] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [294.600230] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [294.600495] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [294.600783] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [294.601153] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [294.601571] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [294.602131] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [294.602528] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [294.602902] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [294.603236] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [294.603541] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [294.603894] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [294.604242] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [294.604540] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [294.604897] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [294.605253] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [294.605618] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [294.605951] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [294.606255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [294.606812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [294.607133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [294.607424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [294.607948] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [294.608686] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [294.609148] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [294.609755] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [294.616474] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [294.620158] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [294.620765] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card1-eDP-1', has fwnode: yes

<7> [294.621811] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card1-eDP-1

<7> [294.624372] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [294.624497] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [294.625724] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card1-DP-1

<7> [294.627524] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [294.627670] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [294.628786] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [294.628900] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [294.630394] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card1-DP-2

<7> [294.632916] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [294.633069] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [294.634468] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [294.634616] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1

<7> [294.640205] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [294.677624] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [294.692252] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [294.695494] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [294.701360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [294.702774] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [294.703271] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [294.703722] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [294.704153] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [294.706141] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.706524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [294.706948] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [294.708272] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [294.708922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.709290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.709900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.710259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.710268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.710574] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.715524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.715538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.716377] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.716874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [294.721471] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.722019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [294.723656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.724111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.724728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.725207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.725218] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.727576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.733072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.733086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.733676] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [294.734811] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [294.737013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [294.737031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [294.737886] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [294.738253] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [294.738611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [294.738987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [294.738997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [294.739004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [294.739034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [294.739381] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [294.739738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [294.744826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected

<7> [294.745110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [294.745120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.745132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.745145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [294.745157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [294.745910] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [294.749817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [294.749839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [294.749851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [294.751678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.752213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.753535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.756972] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.756987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.757479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.761562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.761577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.762147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [294.762165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [294.762177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [294.766742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [294.766762] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [294.766774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [294.767527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.767987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.768621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.769086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.769097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.769518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.772981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.772994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.773490] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [294.773505] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [294.773514] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [294.773523] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [294.773531] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [294.773538] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [294.773644] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [294.773681] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [294.773690] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [294.773722] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [294.773856] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [294.773911] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [294.780776] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [294.785498] fbcon: i915drmfb (fb0) is primary device

<6> [294.789525] Console: switching to colour frame buffer device 200x56

<6> [294.789545] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [294.789561] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [294.790103] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [294.790556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [294.790775] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [294.790792] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [294.791039] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [294.791517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [294.791490] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [294.791541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [294.791943] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [294.792243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [294.792390] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [294.792682] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [294.792750] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [294.793072] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [294.793110] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [294.793392] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [294.793790] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [294.794186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [294.794200] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [294.794218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [294.794241] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [294.794279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [294.794721] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [294.794911] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [294.795166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [294.795344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [294.795645] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [294.796094] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [294.796546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [294.797038] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [294.797488] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [294.797966] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [294.798420] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [294.798914] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [294.799130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [294.799152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.799164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.799177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [294.799188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [294.801043] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [294.801548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [294.802052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [294.802522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [294.802980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [294.803437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.804223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [294.804243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [294.804235] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [294.804256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [294.804641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [294.805013] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [294.805225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.805399] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [294.805779] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [294.805908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.806158] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [294.806538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [294.806526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.807079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.806959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [294.807091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.807343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [294.807512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.807738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [294.808109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [294.808489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [294.808916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [294.809293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [294.809702] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [294.810079] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [294.810460] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [294.810883] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [294.811273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [294.811696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [294.812083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [294.812472] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [294.812866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [294.813243] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [294.813643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [294.814192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.814027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [294.814207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.814413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [294.814718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [294.814735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [294.814746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [294.814818] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [294.815205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [294.815605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [294.815983] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [294.816362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [294.816775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [294.817157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [294.817541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [294.817951] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [294.818330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [294.818728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [294.819280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [294.819301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [294.819117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [294.819313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [294.819499] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [294.819901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [294.820025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.820290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [294.820465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.820688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [294.821076] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [294.821467] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [294.821869] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [294.822258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [294.822681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [294.822671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.823130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.823067] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [294.823141] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.823452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [294.823555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.823847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [294.824228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [294.824641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [294.825057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [294.825443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [294.825847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [294.826245] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [294.826660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [294.827044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [294.827423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [294.827821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [294.828199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [294.828602] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [294.828607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [294.828611] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [294.829404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.829419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.829879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [294.829895] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [294.829905] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [294.829913] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [294.829921] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [294.829928] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [294.830216] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [294.830249] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [294.830255] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [294.830312] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [294.832465] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [294.833198] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [294.833668] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [294.834132] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [294.834616] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [294.835067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [294.835542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [294.836065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [294.836537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [294.837025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [294.837499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [294.838002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [294.838468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.838984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [294.839459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.839956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.840421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.840916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.841389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.841869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.842335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.842808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.843272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.843748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.844217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.844697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [294.845169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.845646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.846114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.846581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.847061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.847530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.847962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.848365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.848756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.849171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.849582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [294.850002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [294.850414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [294.850835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [294.851248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state

<7> [294.851669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [294.852055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.852449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [294.852852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.853250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [294.853657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [294.854061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [294.854464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [294.854880] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [294.856127] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [294.856559] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [294.856986] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [294.857390] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [294.857812] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [294.858222] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [294.858630] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [294.859411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [294.859913] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [294.860331] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.860750] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [294.861145] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [294.861551] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [294.861963] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [294.862356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [294.862764] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [294.863158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [294.863556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [294.863974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [294.864382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [294.864791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [294.865192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [294.865578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [294.865996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [294.866405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [294.866808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [294.867209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [294.867618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [294.868018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [294.868419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [294.868828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [294.869230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [294.869644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [294.870050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [294.870476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<6> [294.871060] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [294.870883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [294.871273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [294.871675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [294.872079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.872478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.872892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.873297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.873705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.874095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [294.874490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [294.874911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [294.875321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [294.875728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [294.876137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.876546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [294.876962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [294.877371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [294.877795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.878201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.878626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.879013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [294.879418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [294.879818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [294.880222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [294.880631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [294.881028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [294.881428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [294.883800] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [294.885385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [294.885841] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [294.886259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [294.886696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [294.887070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [294.887459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [294.887880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [294.888272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [294.888686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [294.890294] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [294.890764] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [294.891507] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [294.892054] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [294.892499] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [294.902640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.902977] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [294.903291] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [295.105481] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [295.106220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [295.108069] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [295.111029] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [295.112181] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [295.114326] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [295.115229] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [295.116134] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [295.119346] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [295.120518] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [295.121671] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [295.124994] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [295.126143] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [295.127752] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [295.132067] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [295.133733] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [295.138190] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [295.141735] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [295.143375] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [295.145688] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [295.150786] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 368 us, max time under evasion is 250 us

<7> [295.158663] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [295.166134] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [295.168385] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [295.171956] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [295.181136] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [295.182466] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [295.182855] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [295.182892] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [295.183340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [295.183016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [295.183397] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [295.187912] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [295.188530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [295.190307] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [295.192023] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [295.196888] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.196940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [295.196975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [295.197128] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [295.198832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [295.200636] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [295.204269] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [295.209971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [295.210024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [295.210073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [295.210125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [295.210173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [295.216578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [295.216662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [295.216692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [295.221319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.222408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.225658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.226554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.226576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.228678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.234370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.234396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.235428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [295.235453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [295.235471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [295.240949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [295.240978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [295.240996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [295.241998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.242621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.243391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.244211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.244227] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.245030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.249033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.249051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.249653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [295.249671] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [295.249684] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [295.249694] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [295.249704] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [295.249714] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [295.249801] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [295.249840] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [295.249851] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [295.249909] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [295.250219] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [295.251638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [295.251654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [295.252475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [295.252926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [295.253356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [295.253886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.253898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [295.253906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [295.253945] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [295.254371] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [295.254819] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [295.256920] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.257210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [295.257223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [295.257235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [295.257383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [295.257403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [295.257398] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.258453] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.258934] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.259339] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.259863] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.260288] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.260785] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.261205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.261982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [295.262116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [295.262127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [295.263090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.263738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.264266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.265005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.265017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.265449] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.268781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.268794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.269245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [295.269377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [295.269389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [295.273936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [295.274078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [295.274089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [295.274823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.275238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.275827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.276277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.276287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.276863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.280652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.280666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.281152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [295.289105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [295.289122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<6> [295.291761] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [295.293713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [295.296398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [295.296415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [295.297261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.297659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<6> [295.297857] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [295.298438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.298995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.299007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.299453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.304991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.305019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.305390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [295.306352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [295.306365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [295.310891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [295.311864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [295.311875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [295.312439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.312758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.313226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.313520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.313527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.313846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.317117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.317127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.317454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [295.318072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [295.318082] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [295.318411] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [295.318772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [295.319150] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [295.319601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.319612] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [295.319620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<6> [295.319775] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [295.319655] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [295.320048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [295.320424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [295.321752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [295.321764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [295.321776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [295.321825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [295.321835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [295.326374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [295.326433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [295.326445] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [295.327417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.327808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [295.328384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [295.330616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.330629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.331030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [295.334677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [295.334693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [295.335159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [295.335213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [295.335224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [295.340686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [295.340746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [295.340757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [295.341455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.341964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [295.344172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [295.344659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.344670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [295.345075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [295.348722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [295.348851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [295.349355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [295.350433] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142]

<7> [296.396018] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [296.396544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [296.397812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [296.398572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [296.398998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [296.399423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [296.399874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [296.400300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [296.400740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [296.401167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [296.401643] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [296.402072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [296.402499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [296.402938] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [296.403367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [296.403807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [296.404237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [296.404686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [296.405120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [296.405547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [296.405992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [296.406428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [296.406870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [296.407315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [296.407769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [296.408200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [296.408641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [296.409071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [296.409503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [296.409943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [296.410378] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [296.410829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [296.411275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [296.411719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [296.412144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [296.412586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [296.413000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [296.413419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [296.413857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [296.414265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [296.414696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [296.415117] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [296.415603] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [296.416056] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [296.416463] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [296.416882] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [296.417289] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.417709] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.418123] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [296.418624] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [296.419081] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [296.419536] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [296.419966] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [296.420382] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [296.420813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [296.421226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [296.421665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [296.422080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [296.422741] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [296.424600] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [296.481519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [296.630797] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [296.632959] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [296.644865] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [296.645419] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [296.645907] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [296.646485] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [296.647030] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [296.699130] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [296.699170] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [296.700305] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [296.700922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [296.701622] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [296.703919] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [296.704323] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [296.705351] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [296.706225] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [296.707923] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [296.711303] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [296.713053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [296.714514] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [296.715938] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [296.717366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [296.718759] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [296.720403] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [296.721834] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [296.723260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [296.724691] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [296.727303] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [296.731381] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [296.732998] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [296.831039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [296.833179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.834877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.837082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.841910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.859753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.950339] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [296.951725] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [296.952883] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [296.954509] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [296.956288] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [296.957648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [296.959124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [296.960450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [296.961990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [296.963255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [296.964946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [296.966612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [296.968106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.969612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [296.971083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.972343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.973756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.975010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.976323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.977386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.978618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.979812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.981228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.982742] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.984399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [296.985918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [296.987381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [296.988859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [296.990324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [296.991538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [296.992782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [296.993912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [296.995118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [296.996172] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [296.997370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [296.998589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [296.999909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [297.001320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [297.002788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [297.004255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [297.005707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [297.007027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [297.008295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [297.009396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [297.010706] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [297.011985] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [297.013133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [297.014158] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [297.015352] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [297.016774] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [297.017988] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [297.019057] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [297.020464] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [297.021704] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [297.022954] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [297.024012] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [297.025260] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [297.026459] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [297.027944] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [297.029413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [297.030850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [297.032305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [297.033605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [297.034847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [297.036327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [297.037787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [297.039236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [297.040705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [297.041967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [297.043017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [297.044238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [297.045312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [297.046505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [297.047629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [297.048855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [297.049937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [297.051285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [297.052514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [297.053725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [297.054902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [297.056158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [297.057253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [297.058486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [297.059707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.061087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [297.062215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [297.063443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [297.064527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [297.065735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [297.066540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [297.067261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [297.068092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [297.068884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [297.069671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [297.070337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [297.071044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [297.071855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [297.072520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [297.073254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [297.074136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [297.074978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [297.075543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [297.076075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [297.076696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [297.077190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [297.077741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [297.078314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [297.090660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [297.100860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [297.101227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [297.101815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [297.102599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [297.103501] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [297.104274] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [297.104655] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [297.104992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [297.105287] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [297.105623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [297.105952] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [297.106234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [297.106515] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [297.106817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [297.107327] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [297.107710] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [297.108241] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [297.108661] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining)

<7> [297.206804] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [297.216695] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [297.217215] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [297.217794] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [297.267151] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [297.268296] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [297.269366] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [297.270533] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [297.426613] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [297.428164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [297.429832] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [297.433136] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [297.434883] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [297.442331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [297.443632] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [297.448079] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [297.449860] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [297.451537] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [297.455672] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [297.457301] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [297.458940] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [297.463459] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [297.465135] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [297.466819] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [297.471217] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [297.472824] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [297.474356] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [297.478773] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [297.480423] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [297.483291] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [297.486841] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [297.488469] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [297.490772] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [297.495889] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 376 us, max time under evasion is 250 us

<7> [297.502707] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [297.509287] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [297.511235] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [297.516789] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [297.518160] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [297.524115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [297.526326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.527832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [297.529475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [297.530921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.530956] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.532308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [297.537999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [297.538040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [297.542466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [297.548318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [297.550240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.551707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [297.553251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [297.554739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.554775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [297.556235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [297.560878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [297.560905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [297.654128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.655613] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.668733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.694298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.694786] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.707586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.786379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.788138] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [297.798291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.798933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.799469] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [297.800299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.801142] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.801915] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [297.802737] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.803495] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.804280] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [297.806830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [297.903074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [297.905305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [297.906614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [297.907943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [297.917271] Console: switching to colour dummy device 80x25

<7> [297.919881] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [297.920328] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [297.922304] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [297.923955] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.925730] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.927451] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [297.930098] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [297.953101] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [297.975581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [297.976884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [297.978251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [297.979684] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [297.980929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [297.982308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [297.983600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [297.985096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [297.986484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [297.988058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [297.989768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [297.991426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [297.993078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [297.994606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [297.995782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [297.997119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [297.998604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [298.000040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [298.001516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [298.002967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [298.004358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [298.005613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [298.007036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [298.008481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [298.009936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [298.011384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [298.012565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [298.013286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [298.014016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [298.014760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [298.015423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [298.016176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [298.016927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [298.017661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [298.018358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [298.019083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [298.019829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [298.020493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [298.021191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [298.021779] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [298.022464] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [298.023218] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [298.023814] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [298.024410] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [298.024961] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [298.025563] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [298.026061] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [298.026593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [298.027282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [298.027858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [298.028571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [298.030110] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [298.238830] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [298.241290] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [298.256389] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [298.257633] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [298.258820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [298.260227] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [298.261814] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [298.312979] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [298.314298] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [298.315520] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [298.316885] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [298.319239] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [298.320015] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [298.320971] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [298.322370] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [298.324122] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [298.326374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [298.328244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [298.330212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [298.332133] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [298.333940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [298.335843] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [298.337430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [298.339084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [298.340501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [298.342150] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [298.345119] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [298.415690] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [298.462050] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [298.480225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [298.484667] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [298.501315] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [298.508053] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [298.536826] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (282 ms remaining)

<7> [298.823168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [298.834725] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [299.566668] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [299.568172] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload