igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	55.03 seconds
Hostname	shard-rkl-3
Igt-Version	IGT-Version: 2.2-g005281c52 (x86_64) (Linux: 6.18.0-rc7-CI_DRM_17607-g7fe1b006b65a+ x86_64)
Out	Using IGT_SRANDOM=1764352503 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811f229818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x282/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.542s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.487s) Subtest gem-execbuf-stress: SUCCESS (55.033s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.542s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.487s) Subtest gem-execbuf-stress: SUCCESS (55.033s)
Dmesg	<6> [254.285787] Console: switching to colour dummy device 80x25 <6> [254.285927] [IGT] i915_pm_rpm: executing <7> [254.287688] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [254.288140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [254.288148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.292372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [254.292422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [254.292427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.318244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [254.318252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [254.318254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [254.318256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [254.318455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.318606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [254.318918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.319067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [254.319435] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [254.319442] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [254.319446] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [254.319451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [254.319454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [254.319457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [254.319459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [254.319462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [254.319465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [254.319467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [254.319470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [254.319472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [254.319475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [254.319478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [254.319480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [254.319483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [254.319486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [254.319488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [254.319491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [254.319493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.319496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.319499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.319501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [254.319504] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [254.319506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [254.319509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [254.319512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [254.319514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [254.319517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [254.319520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [254.319522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [254.319525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.319528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.319530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.319533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [254.319579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [254.319582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.323787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [254.323821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [254.323824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.328040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [254.331749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [254.331754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.335936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [254.336330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [254.336334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.340523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [254.340774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [254.340777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.344991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [254.345297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [254.345302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.349507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [254.349520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [254.349523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.375343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [254.375351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [254.375353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [254.375355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [254.375564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.375707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [254.376011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.376159] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [254.376516] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [254.376521] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [254.376526] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [254.376531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [254.376533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [254.376536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [254.376539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [254.376542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [254.376544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [254.376547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [254.376549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [254.376552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [254.376555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [254.376557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [254.376560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [254.376562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [254.376565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [254.376568] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [254.376570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [254.376573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.376576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.376578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [254.376581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [254.376584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [254.376586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [254.376589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [254.376591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [254.376594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [254.376597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [254.376599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [254.376602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [254.376605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.376607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.376610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [254.376612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [254.376637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [254.376640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.380834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [254.380847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [254.380850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.385041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [254.385340] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:236] <7> [255.399819] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [255.400074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [255.400793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [255.401481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [255.402102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [255.402756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [255.403388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [255.404001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [255.404649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [255.405201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [255.405343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [255.405479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [255.405611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [255.405743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [255.405876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [255.406010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [255.406146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [255.406284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [255.406417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [255.406550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [255.406682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [255.406813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [255.406945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [255.407077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [255.407208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [255.407347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [255.407479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [255.407611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [255.407743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [255.407877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [255.408012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [255.408147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [255.408290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [255.408423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [255.408556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [255.408688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [255.408820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [255.408956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [255.409091] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [255.409226] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0 <7> [255.409397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [255.409530] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [255.409680] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [255.409811] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [255.409941] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [255.410074] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [255.410207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [255.410345] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [255.410492] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0 <7> [255.410627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [255.410776] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [255.410924] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [255.411060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset] <7> [255.411195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [255.411335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [255.411467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [255.411598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [255.411730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [255.411861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [255.422921] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [255.443439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [255.444127] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7> [255.444883] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [255.445539] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [255.446127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [255.446752] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [255.447438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [255.448048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [255.448643] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [255.449225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [255.449832] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.450654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.451326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [255.451842] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [255.452986] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [255.453376] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [255.555532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [255.556243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.556993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.559120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.560035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.564801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.566129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.566397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.566679] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.566817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.566988] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [255.657051] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [255.658342] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [255.658887] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [255.674785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.675372] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.675990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.676652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.677420] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.678140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.679040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.679810] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.680482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.681469] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.682076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.683387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.685529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.686053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.699943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.700087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.700231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.705312] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [255.706035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.749345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.749354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.749357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.749359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.749563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.750631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.750957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.751861] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.751929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.756680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.761679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [255.762678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.764116] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [255.764220] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [255.835582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [255.836226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.836919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.838769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.839462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.842917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.844242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.844502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.844784] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.844926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.845098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [255.877772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.878141] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.878834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.879484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.880196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.880972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.881727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.882455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.883111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.884497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.885080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.886313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.888426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.889054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.901749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.901963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.902196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.903456] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [255.906713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.937876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.937884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.937887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.937889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.938092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.938217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.938837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.938968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.938989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.943535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.011534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.013238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.020498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.022031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.022851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.023700] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.024287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.024902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.119471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.119872] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.120584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.121292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.122066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.122837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.123579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.124327] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.125014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.126459] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.127076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.128311] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.130502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.131129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.141504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.141662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.142174] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.142397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.146970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.191379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.191389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.191391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.191394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.192606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.192761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.193075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.193929] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.193965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.198727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.251438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.252136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.258040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.259517] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.260221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.261018] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.261623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.262250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.357518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.357919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.358636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.359341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.360090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.360851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.361616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.362353] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.362947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.363192] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.363338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.363585] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.364255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.364403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.370546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.370645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.370788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.371991] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.375525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.407520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.407529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.407532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.407534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.407742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.407866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.408173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.408638] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.408659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.413581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.475496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.476200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [256.478800] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [256.478820] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [256.478828] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [256.478835] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [256.482113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.483510] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.483745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.484026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.484165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.484347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.585469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.585840] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.586501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.587142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.587907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.588659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.589385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.590084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.590810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.591301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.591437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.591712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.592383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.592519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.597535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.597652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.597847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.598517] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.602404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.631889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.631898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.631900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.631903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.632108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.632231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.633230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.633371] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.633391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.637903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.707489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.708197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.714190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.715674] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.716423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.717170] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.717843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.718555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.816479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.816879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.817592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.818294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.819021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.819786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.820515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.821218] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.821945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.822727] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.823376] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.824021] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.824693] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.824830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.832209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.832368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.832573] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.833691] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.837160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.869192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.869201] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.869203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.869206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.870345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.870473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.870823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.870962] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.870982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.875220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.939512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.940221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.946231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.947565] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.947807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.948088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.948226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.948409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.048465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.048860] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.049563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.050247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.051053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.051814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.052551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.053280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.053962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.054411] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.054545] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.054821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.055500] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.055637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.060653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.060748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.061090] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.061200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.065691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.095242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.095251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.095259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.095262] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.095461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.095589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.095901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.096031] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.096052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.101265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.163528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.164241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.171434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.172895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.173643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.174417] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.174984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.175628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.275471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.275869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.276584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.277292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.278030] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.279018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.279808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.280670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.281483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.281817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.281961] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.282212] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.282900] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.283044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.289189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.289301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.289446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.290508] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.294163] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.323681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.323690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.323693] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.323695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.323904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.324030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.324346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.324500] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.324522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.329720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.395488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.396196] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.402190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.403541] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.403816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.404099] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.404239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.404438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.504464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.504869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.505587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.506381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.507126] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.507941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.508701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.509460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.510148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.510972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.511637] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.512459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.514678] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.515328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.525712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.525893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.526164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.530850] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.530837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.561990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.562000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.562002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.562005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.562202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.562843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.563170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.563308] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.563329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.567762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.635447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.636154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.643334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.644736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.644971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.645265] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.645462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.645680] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.744461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.744863] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.745579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.746386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.747172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.747976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.748767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.749520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.750321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.751123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.751798] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.752683] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.754892] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.755571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.767114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.767334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.767634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.768805] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.772234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.802936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.802945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.802947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.802949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.803162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.804070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.804395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.804527] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.804547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.809003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.875499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.876207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.883397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.885077] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.886098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.887067] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.887756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.888772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.983459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.983861] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.984588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.985296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.986022] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.986793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.987534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.988237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.988967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.989494] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.989628] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.989877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.990556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.990691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.996832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.996932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.997077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.998309] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.001795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.032637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.032646] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.032649] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.032651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.032856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.032984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.033311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.033442] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.033463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.038653] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.107513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.108212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.115441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.117116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.118116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.119184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.119859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.120863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [258.200858] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [258.202104] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [258.202650] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [258.216390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.216600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.216965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.217415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.217910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.218393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.218829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.219219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.219557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.220317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.220595] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.221318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.222427] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.222678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.232625] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.232777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.233001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.236198] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [258.238409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.269174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.269183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.269186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.269188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.269403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.269573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.269890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.270023] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.270094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.276357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.281373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [258.282418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.283868] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [258.283977] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [258.339559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [258.339814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.340012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.341347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.341583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.346290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.347637] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.347871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.348152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.348301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.348472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [258.396449] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [258.396848] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [258.397561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [258.398276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.399029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.399809] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.400542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.401265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [258.402038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.402811] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [258.403596] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [258.404456] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.406682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.407336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.417664] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [258.417842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.418087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [258.418848] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [258.422617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [258.453767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [258.453776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [258.453779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [258.453781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [258.453994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.454117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [258.454564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [258.454711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [258.454731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [258.459485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [258.523517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.524225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [258.530220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [258.531570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [258.531826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [258.532108] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [258.532257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [258.532427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [263.632408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [263.632808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [263.633529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [263.634230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [263.634997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [263.635838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [263.636644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [263.637433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [263.637713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [263.637950] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [263.638080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [263.638433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [263.639092] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [263.639252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [263.646654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [263.646830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [263.647248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [263.648318] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [263.651870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [263.681306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [263.681315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [263.681318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [263.681320] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [263.681523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [263.681648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [263.681958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [263.682083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [263.682103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [263.687364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [263.755373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [263.756069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [263.762055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [263.763395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [263.763638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [263.763919] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [263.764058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [263.764239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [265.787778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [265.800696] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [265.801341] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [265.802002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [265.802753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [265.803529] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.804287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.805068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.805918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [265.806230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [265.806625] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [265.806760] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [265.807170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [265.807865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [265.808002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [265.815357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [265.815498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [265.820333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [265.852544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [265.852553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [265.852556] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [265.852560] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [265.852771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.852898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [265.853535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.853669] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [265.853690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [265.858486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [265.863556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [265.868245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [265.900817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [265.900824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [265.900826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [265.900828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [265.901034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.901158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [265.901735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [265.901868] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [265.901887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [265.906417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [265.911307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [265.911451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [265.914946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [265.916275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [265.916511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [265.916794] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [265.916934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [265.917104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [266.018007] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [266.018026] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [266.018033] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [266.018039] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [268.863362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [268.863764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [268.864479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [268.865184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [268.865911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.866744] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.867514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.868254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.868436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [268.868679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [268.868813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [268.869054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [268.869736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [268.869873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [268.876048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [268.876144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [268.876324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [268.876953] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [268.880990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [268.913104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [268.913113] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [268.913116] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [268.913118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [268.914237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [268.914365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [268.914673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [268.914803] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [268.914824] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [268.919116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [268.987388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [268.988093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [268.994093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [268.994364] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [268.994370] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [268.994371] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [268.994373] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [268.995447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [268.995689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [268.995973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [268.996176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [268.996407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [269.098468] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [269.098488] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [269.098495] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [269.098503] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [274.093217] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [274.093618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [274.094326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [274.095032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [274.095841] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.096603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.097331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.098052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.098786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [274.099030] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [274.099180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [274.099427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [274.100106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [274.100254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [274.107670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [274.107844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [274.108152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [274.109364] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [274.112776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [274.156018] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [274.156028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [274.156030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [274.156033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [274.156240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.157353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [274.157659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.158576] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [274.158598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [274.163352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [274.211315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [274.212019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [274.218010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [274.219376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [274.219641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [274.219926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [274.220135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [274.220347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [276.027192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [276.039286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [276.039686] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [276.040408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [276.041119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [276.041857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [276.042637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [276.043388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [276.044138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [276.044836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [276.045516] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [276.045674] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [276.046035] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [276.046764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [276.046921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [276.051936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [276.052024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [276.056785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [276.088865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [276.088873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.088876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [276.088878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [276.089092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [276.090054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [276.090371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [276.090502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [276.090522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [276.094894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [276.099785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [276.104667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [276.135037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [276.135044] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.135046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [276.135049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [276.135440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [276.135565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [276.135874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [276.136002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [276.136020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [276.140330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [276.145210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [276.145357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [276.148848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [276.150185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [276.150415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [276.150699] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [276.150839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [276.151009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [279.323269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [279.323671] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [279.324388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [279.325116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [279.325865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.326637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.327373] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.328112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [279.328322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [279.328566] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [279.328701] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [279.328951] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [279.329643] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [279.329779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [279.337159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [279.337268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [279.337602] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [279.337716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [279.343356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [279.387971] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [279.387980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.387983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [279.387985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [279.388193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [279.389257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [279.389560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [279.390482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [279.390503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [279.395271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [279.443532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [279.444291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [279.450116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [279.451507] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [279.451745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [279.452025] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [279.452179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [279.452348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [284.553170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [284.553569] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [284.554286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [284.554988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.555714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.556479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.557210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.557916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.558134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [284.558375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [284.558510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [284.558754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [284.559429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.559566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.566942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [284.567071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.567232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [284.568256] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [284.571907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [284.603812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [284.603821] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.603824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [284.603826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [284.604933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.605068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [284.605390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.605566] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [284.605587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [284.609871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [284.675238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.675943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [284.681969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.683296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [284.683526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [284.683807] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [284.684007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [284.684239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [286.267112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [286.279343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [286.279743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [286.280453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [286.281169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.281905] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [286.282689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [286.283427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [286.284190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [286.284726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.284970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [286.285105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [286.285357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.286037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [286.286174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [286.291189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [286.291277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.296058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [286.325629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [286.325637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.325639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [286.325641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [286.325843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [286.326747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [286.327056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [286.327187] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [286.327207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [286.331658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [286.336566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [286.341405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [286.372261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [286.372267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.372270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [286.372272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [286.372479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [286.372603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [286.372912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [286.373388] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [286.373422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [286.378312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [286.383173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [286.383320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [286.386796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [286.388149] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [286.388377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [286.388659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [286.388799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [286.388974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.785019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.785420] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [289.786132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [289.786866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.787632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.788400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.788746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.788950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [289.789129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [289.789371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [289.789504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [289.789751] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [289.790434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.790571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.796754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.796856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.797013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [289.798187] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [289.801764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [289.847319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [289.847328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.847330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [289.847333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [289.847535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [289.848622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [289.848936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [289.849816] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [289.849852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [289.854650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [289.899066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.899386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.906230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.907640] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [289.907921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [289.908232] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [289.908370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [289.908540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [295.010919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [295.011317] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [295.012034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [295.012816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [295.013562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.014372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.015125] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.015463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.015641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [295.015911] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [295.016048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [295.016295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [295.016971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [295.017108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [295.024503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [295.024594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [295.024775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [295.025810] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [295.030617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [295.060418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [295.060427] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.060429] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [295.060432] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [295.060642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.061276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [295.061595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.061738] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [295.061765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [295.066182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [295.138985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [295.139802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [295.145769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [295.147219] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [295.147960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [295.148790] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [295.149416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [295.150136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [296.506863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [296.518858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [296.519253] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [296.519984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [296.520669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [296.521450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.522216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.522962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.523712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [296.524401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [296.525112] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [296.525247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [296.525506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [296.526189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [296.526327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [296.531341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [296.531429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [296.536211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [296.567352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [296.567360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.567363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [296.567365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [296.567572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.568059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [296.568378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.568509] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [296.568528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [296.573025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [296.577883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [296.582751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [296.612209] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [296.612216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [296.612218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [296.612220] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [296.612414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.612537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [296.613490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [296.613619] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [296.613636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [296.618371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [296.623269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [296.623414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [296.628073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [296.629467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [296.629710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [296.629992] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [296.630131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [296.630301] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [300.243798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [300.244201] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [300.244925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [300.245656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [300.246401] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.247228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.247634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.247830] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [300.248008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [300.248249] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [300.248382] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [300.248625] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [300.249300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [300.249438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [300.255635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [300.255734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [300.255875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [300.257035] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [300.260557] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [300.304975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [300.304984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [300.304987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [300.304989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [300.305191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.306301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [300.307437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [300.307599] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [300.307622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [300.312334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [300.362983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [300.363732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [300.369624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [300.370966] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [300.371445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [300.371737] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [300.371876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [300.372059] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [305.470688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [305.471082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [305.471792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [305.472473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [305.473248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.474003] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.474723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.475223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.475400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [305.475649] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [305.475782] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [305.476031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [305.476706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [305.476840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [305.483020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [305.483186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [305.483422] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [305.484019] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [305.488023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [305.519195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [305.519204] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.519206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [305.519208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [305.519419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.519855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [305.520172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.520302] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [305.520322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [305.524798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [305.594835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [305.595612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [305.597140] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [305.597158] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [305.597165] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [305.597172] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [305.600301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [305.601659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [305.601890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [305.602170] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [305.602309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [305.602486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [306.746705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [306.758646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [306.759045] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [306.759774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [306.760579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [306.761320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.762164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.762973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.763722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [306.764579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [306.764830] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [306.764965] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [306.765248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [306.765938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [306.766077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [306.772218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [306.772307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [306.777192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [306.807422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [306.807430] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [306.807433] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [306.807435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [306.807806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.807947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [306.808261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.808394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [306.808415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [306.813950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [306.818809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [306.823661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [306.856728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [306.856736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [306.856738] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [306.856741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [306.856942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.857069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [306.857377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [306.857902] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [306.857944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [306.862826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [306.867701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [306.867851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [306.872529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [306.873898] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [306.874158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [306.874438] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [306.874593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [306.874781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [310.689701] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [310.690909] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [310.693867] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [310.694035] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [310.694168] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [310.694307] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A] <7> [310.694464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [310.694610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [310.694750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [310.694890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [310.695027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [310.695165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [310.695301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [310.695454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [310.695587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [310.695720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [310.695853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [310.695985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [310.696117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [310.696248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [310.696390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [310.696526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [310.696661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [310.696794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [310.696927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [310.697060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [310.697192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [310.697325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [310.697467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [310.697604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [310.697736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [310.697868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [310.698000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [310.698133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [310.698264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [310.698412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [310.698545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [310.698677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [310.698809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [310.698941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [310.699073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [310.699205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [310.699336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [310.699478] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [310.699636] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [310.699771] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [310.699906] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [310.700039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [310.700171] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [310.700301] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [310.700441] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [310.700574] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [310.700721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1 <7> [310.700858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [310.700991] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [310.701138] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [310.701287] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [310.701432] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0 <7> [310.701570] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7> [310.701708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset] <7> [310.701843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [310.701977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [310.702110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [310.702245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [310.702386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [310.702520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [310.702653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [310.702785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [310.702916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [310.703047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [310.703179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [310.703312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [310.703454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [310.703587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [310.703720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [310.703852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [310.703984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [310.704116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [310.704247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [310.704382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [310.704514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [310.704648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [310.704783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [310.704917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [310.705050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.705182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.705314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.705489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.705621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.705753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [310.705884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.706015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.706146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [310.706277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [310.706420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [310.706551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [310.706684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [310.706814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [310.706946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [310.707076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [310.707207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [310.707338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [310.707477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [310.719748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [310.719836] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [310.719981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [310.720157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [310.720402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.720613] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.720818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.721021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [310.721204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [310.721676] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [310.721810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [310.722222] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [310.722909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [310.723047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [310.732843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [310.732991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [310.733212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [310.734062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [310.735499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [310.735652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [310.735788] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [310.735924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [310.736060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [310.736194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [310.736328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [310.736514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [310.736739] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7> [310.736877] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [310.737070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [310.737282] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [310.737405] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d <7> [310.738189] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [310.738336] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [310.756274] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a <7> [310.756582] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation <7> [310.757351] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [310.757782] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [310.759639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [310.760150] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [310.760660] [IGT] i915_pm_rpm: exiting, ret=0 <7> [310.763987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [310.785585] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive <7> [310.789886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [310.789894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [310.789896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [310.789901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [310.790099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.790248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [310.790567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [310.790717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [310.795353] Console: switching to colour frame buffer device 240x67 <7> [310.795304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [310.799513] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.288140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [254.288148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.292372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [254.292422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [254.292427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.318244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [254.318252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [254.318254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [254.318256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [254.318455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.318606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [254.318918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.319067] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [254.319435] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [254.319442] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [254.319446] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [254.319451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [254.319454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [254.319457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [254.319459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [254.319462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [254.319465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [254.319467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [254.319470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [254.319472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [254.319475] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [254.319478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [254.319480] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [254.319483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [254.319486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [254.319488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [254.319491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [254.319493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.319496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.319499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.319501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [254.319504] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [254.319506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [254.319509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [254.319512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [254.319514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [254.319517] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [254.319520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [254.319522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [254.319525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.319528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.319530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.319533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [254.319579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [254.319582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.323787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [254.323821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [254.323824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.328040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [254.331749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [254.331754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.335936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [254.336330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [254.336334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.340523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [254.340774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [254.340777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.344991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [254.345297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [254.345302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.349507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [254.349520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [254.349523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.375343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [254.375351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [254.375353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [254.375355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [254.375564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.375707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [254.376011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.376159] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [254.376516] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [254.376521] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [254.376526] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [254.376531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [254.376533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [254.376536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [254.376539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [254.376542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [254.376544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [254.376547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [254.376549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [254.376552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [254.376555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [254.376557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [254.376560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [254.376562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [254.376565] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [254.376568] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [254.376570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [254.376573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.376576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.376578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [254.376581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [254.376584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [254.376586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [254.376589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [254.376591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [254.376594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [254.376597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [254.376599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [254.376602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [254.376605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.376607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.376610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [254.376612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [254.376637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [254.376640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.380834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [254.380847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [254.380850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.385041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [255.399819] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [255.400074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [255.400793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [255.401481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [255.402102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [255.402756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [255.403388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [255.404001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [255.404649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [255.405201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [255.405343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [255.405479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [255.405611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [255.405743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [255.405876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [255.406010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [255.406146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [255.406284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [255.406417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [255.406550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [255.406682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [255.406813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [255.406945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [255.407077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [255.407208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [255.407347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [255.407479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [255.407611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [255.407743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [255.407877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [255.408012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [255.408147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [255.408290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [255.408423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [255.408556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [255.408688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [255.408820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [255.408956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [255.409091] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [255.409226] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0

<7> [255.409397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [255.409530] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [255.409680] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [255.409811] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [255.409941] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [255.410074] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [255.410207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [255.410345] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [255.410492] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0

<7> [255.410627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [255.410776] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [255.410924] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [255.411060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset]

<7> [255.411195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [255.411335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [255.411467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [255.411598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [255.411730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [255.411861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [255.422921] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [255.443439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [255.444127] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]

<7> [255.444883] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [255.445539] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [255.446127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [255.446752] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [255.447438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [255.448048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [255.448643] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [255.449225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [255.449832] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.450654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.451326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [255.451842] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [255.452986] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [255.453376] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [255.555532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [255.556243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.556993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.559120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.560035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.564801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.566129] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.566397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.566679] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.566817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.566988] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [255.657051] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [255.674785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.675372] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.675990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.676652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.677420] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.678140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.679040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.679810] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.680482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.681469] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.682076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.683387] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.685529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.686053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.699943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.700087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.700231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.705312] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [255.706035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.749345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.749354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.749357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.749359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.749563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.750631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.750957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.751861] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.751929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.756680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.761679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [255.762678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.764116] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [255.764220] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [255.835582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [255.836226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.836919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.838769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.839462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.842917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.844242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.844502] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.844784] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.844926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.845098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [255.877772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.878141] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.878834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.879484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.880196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.880972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.881727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.882455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.883111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.884497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.885080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.886313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.888426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.889054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.901749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.901963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.902196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.903456] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [255.906713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.937876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.937884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.937887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.937889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.938092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.938217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.938837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.938968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.938989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.943535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.011534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.013238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.020498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.022031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.022851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.023700] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.024287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.024902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.119471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.119872] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.120584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.121292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.122066] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.122837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.123579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.124327] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.125014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.126459] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.127076] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.128311] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.130502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.131129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.141504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.141662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.142174] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.142397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.146970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.191379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.191389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.191391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.191394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.192606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.192761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.193075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.193929] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.193965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.198727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.251438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.252136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.258040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.259517] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.260221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.261018] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.261623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.262250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.357518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.357919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.358636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.359341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.360090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.360851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.361616] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.362353] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.362947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.363192] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.363338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.363585] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.364255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.364403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.370546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.370645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.370788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.371991] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.375525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.407520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.407529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.407532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.407534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.407742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.407866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.408173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.408638] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.408659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.413581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.475496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.476200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [256.478800] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [256.478820] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [256.478828] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [256.482113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.483510] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.483745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.484026] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.484165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.484347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.585469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.585840] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.586501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.587142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.587907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.588659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.589385] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.590084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.590810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.591301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.591437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.591712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.592383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.592519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.597535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.597652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.597847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.598517] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.602404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.631889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.631898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.631900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.631903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.632108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.632231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.633230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.633371] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.633391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.637903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.707489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.708197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.714190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.715674] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.716423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.717170] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.717843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.718555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.816479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.816879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.817592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.818294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.819021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.819786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.820515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.821218] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.821945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.822727] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.823376] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.824021] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.824693] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.824830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.832209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.832368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.832573] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.833691] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.837160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.869192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.869201] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.869203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.869206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.870345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.870473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.870823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.870962] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.870982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.875220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.939512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.940221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.946231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.947565] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.947807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.948088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.948226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.948409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.048465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.048860] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.049563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.050247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.051053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.051814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.052551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.053280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.053962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.054411] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.054545] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.054821] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.055500] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.055637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.060653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.060748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.061090] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.061200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.065691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.095242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.095251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.095259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.095262] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.095461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.095589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.095901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.096031] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.096052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.101265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.163528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.164241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.171434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.172895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.173643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.174417] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.174984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.175628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.275471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.275869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.276584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.277292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.278030] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.279018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.279808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.280670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.281483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.281817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.281961] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.282212] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.282900] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.283044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.289189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.289301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.289446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.290508] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.294163] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.323681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.323690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.323693] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.323695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.323904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.324030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.324346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.324500] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.324522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.329720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.395488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.396196] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.402190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.403541] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.403816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.404099] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.404239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.404438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.504464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.504869] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.505587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.506381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.507126] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.507941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.508701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.509460] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.510148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.510972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.511637] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.512459] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.514678] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.515328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.525712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.525893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.526164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.530850] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.530837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.561990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.562000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.562002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.562005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.562202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.562843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.563170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.563308] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.563329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.567762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.635447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.636154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.643334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.644736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.644971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.645265] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.645462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.645680] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.744461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.744863] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.745579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.746386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.747172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.747976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.748767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.749520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.750321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.751123] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.751798] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.752683] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.754892] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.755571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.767114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.767334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.767634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.768805] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.772234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.802936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.802945] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.802947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.802949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.803162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.804070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.804395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.804527] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.804547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.809003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.875499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.876207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.883397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.885077] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.886098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.887067] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.887756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.888772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.983459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.983861] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.984588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.985296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.986022] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.986793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.987534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.988237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.988967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.989494] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.989628] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.989877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.990556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.990691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.996832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.996932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.997077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.998309] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.001795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.032637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.032646] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.032649] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.032651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.032856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.032984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.033311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.033442] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.033463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.038653] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.107513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.108212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.115441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.117116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.118116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.119184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.119859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.120863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [258.202104] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [258.216390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.216600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.216965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.217415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.217910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.218393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.218829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.219219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.219557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.220317] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.220595] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.221318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.222427] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.222678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.232625] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.232777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.233001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.236198] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [258.238409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.269174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.269183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.269186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.269188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.269403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.269573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.269890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.270023] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.270094] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.276357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.281373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [258.282418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.283868] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [258.283977] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [258.339559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [258.339814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.340012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.341347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.341583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.346290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.347637] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.347871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.348152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.348301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.348472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [258.396449] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [258.396848] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [258.397561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [258.398276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.399029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.399809] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.400542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.401265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [258.402038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.402811] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [258.403596] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [258.404456] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.406682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.407336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.417664] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [258.417842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.418087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [258.418848] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [258.422617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [258.453767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [258.453776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [258.453779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [258.453781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [258.453994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.454117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [258.454564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [258.454711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [258.454731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [258.459485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [258.523517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.524225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [258.530220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [258.531570] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [258.531826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [258.532108] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [258.532257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [258.532427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [263.632408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [263.632808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [263.633529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [263.634230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [263.634997] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [263.635838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [263.636644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [263.637433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [263.637713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [263.637950] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [263.638080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [263.638433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [263.639092] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [263.639252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [263.646654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [263.646830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [263.647248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [263.648318] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [263.651870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [263.681306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [263.681315] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [263.681318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [263.681320] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [263.681523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [263.681648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [263.681958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [263.682083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [263.682103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [263.687364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [263.755373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [263.756069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [263.762055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [263.763395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [263.763638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [263.763919] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [263.764058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [263.764239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [265.787778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [265.800696] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [265.801341] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [265.802002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [265.802753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [265.803529] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.804287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.805068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.805918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [265.806230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [265.806625] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [265.806760] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [265.807170] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [265.807865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [265.808002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [265.815357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [265.815498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [265.820333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [265.852544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [265.852553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [265.852556] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [265.852560] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [265.852771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.852898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [265.853535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.853669] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [265.853690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [265.858486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [265.863556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [265.868245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [265.900817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [265.900824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [265.900826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [265.900828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [265.901034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.901158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [265.901735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [265.901868] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [265.901887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [265.906417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [265.911307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [265.911451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [265.914946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [265.916275] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [265.916511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [265.916794] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [265.916934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [265.917104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [266.018007] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [266.018026] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [266.018033] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [268.863362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [268.863764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [268.864479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [268.865184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [268.865911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.866744] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.867514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.868254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.868436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [268.868679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [268.868813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [268.869054] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [268.869736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [268.869873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [268.876048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [268.876144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [268.876324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [268.876953] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [268.880990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [268.913104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [268.913113] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [268.913116] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [268.913118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [268.914237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [268.914365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [268.914673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [268.914803] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [268.914824] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [268.919116] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [268.987388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [268.988093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [268.994093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [268.994364] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [268.994370] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [268.994371] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [268.995447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [268.995689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [268.995973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [268.996176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [268.996407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [269.098468] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [269.098488] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [269.098495] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [274.093217] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [274.093618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [274.094326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [274.095032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [274.095841] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.096603] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.097331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.098052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.098786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [274.099030] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [274.099180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [274.099427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [274.100106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [274.100254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [274.107670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [274.107844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [274.108152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [274.109364] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [274.112776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [274.156018] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [274.156028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [274.156030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [274.156033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [274.156240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.157353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [274.157659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.158576] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [274.158598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [274.163352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [274.211315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [274.212019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [274.218010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [274.219376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [274.219641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [274.219926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [274.220135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [274.220347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [276.027192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [276.039286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [276.039686] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [276.040408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [276.041119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [276.041857] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [276.042637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [276.043388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [276.044138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [276.044836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [276.045516] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [276.045674] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [276.046035] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [276.046764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [276.046921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [276.051936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [276.052024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [276.056785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [276.088865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [276.088873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.088876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [276.088878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [276.089092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [276.090054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [276.090371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [276.090502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [276.090522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [276.094894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [276.099785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [276.104667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [276.135037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [276.135044] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.135046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [276.135049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [276.135440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [276.135565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [276.135874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [276.136002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [276.136020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [276.140330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [276.145210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [276.145357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [276.148848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [276.150185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [276.150415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [276.150699] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [276.150839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [276.151009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [279.323269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [279.323671] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [279.324388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [279.325116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [279.325865] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.326637] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.327373] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.328112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [279.328322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [279.328566] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [279.328701] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [279.328951] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [279.329643] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [279.329779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [279.337159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [279.337268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [279.337602] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [279.337716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [279.343356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [279.387971] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [279.387980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.387983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [279.387985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [279.388193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [279.389257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [279.389560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [279.390482] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [279.390503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [279.395271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [279.443532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [279.444291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [279.450116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [279.451507] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [279.451745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [279.452025] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [279.452179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [279.452348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [284.553170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [284.553569] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [284.554286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [284.554988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.555714] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.556479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.557210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.557916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.558134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [284.558375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [284.558510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [284.558754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [284.559429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.559566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.566942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [284.567071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.567232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [284.568256] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [284.571907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [284.603812] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [284.603821] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.603824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [284.603826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [284.604933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.605068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [284.605390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.605566] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [284.605587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [284.609871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [284.675238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.675943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [284.681969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.683296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [284.683526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [284.683807] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [284.684007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [284.684239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [286.267112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [286.279343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [286.279743] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [286.280453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [286.281169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.281905] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [286.282689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [286.283427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [286.284190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [286.284726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.284970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [286.285105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [286.285357] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.286037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [286.286174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [286.291189] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [286.291277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.296058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [286.325629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [286.325637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.325639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [286.325641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [286.325843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [286.326747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [286.327056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [286.327187] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [286.327207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [286.331658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [286.336566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [286.341405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [286.372261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [286.372267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.372270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [286.372272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [286.372479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [286.372603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [286.372912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [286.373388] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [286.373422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [286.378312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [286.383173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [286.383320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [286.386796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [286.388149] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [286.388377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [286.388659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [286.388799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [286.388974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.785019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.785420] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [289.786132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [289.786866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.787632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.788400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.788746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.788950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [289.789129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [289.789371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [289.789504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [289.789751] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [289.790434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.790571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.796754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.796856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.797013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [289.798187] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [289.801764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [289.847319] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [289.847328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.847330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [289.847333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [289.847535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [289.848622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [289.848936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [289.849816] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [289.849852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [289.854650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [289.899066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.899386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.906230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.907640] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [289.907921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [289.908232] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [289.908370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [289.908540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [295.010919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [295.011317] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [295.012034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [295.012816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [295.013562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.014372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.015125] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.015463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.015641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [295.015911] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [295.016048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [295.016295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [295.016971] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [295.017108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [295.024503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [295.024594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [295.024775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [295.025810] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [295.030617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [295.060418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [295.060427] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.060429] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [295.060432] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [295.060642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.061276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [295.061595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.061738] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [295.061765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [295.066182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [295.138985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [295.139802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [295.145769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [295.147219] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [295.147960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [295.148790] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [295.149416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [295.150136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [296.506863] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [296.518858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [296.519253] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [296.519984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [296.520669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [296.521450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.522216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.522962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.523712] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [296.524401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [296.525112] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [296.525247] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [296.525506] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [296.526189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [296.526327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [296.531341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [296.531429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [296.536211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [296.567352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [296.567360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.567363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [296.567365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [296.567572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.568059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [296.568378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.568509] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [296.568528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [296.573025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [296.577883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [296.582751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [296.612209] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [296.612216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [296.612218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [296.612220] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [296.612414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.612537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [296.613490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [296.613619] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [296.613636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [296.618371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [296.623269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [296.623414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [296.628073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [296.629467] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [296.629710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [296.629992] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [296.630131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [296.630301] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [300.243798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [300.244201] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [300.244925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [300.245656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [300.246401] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.247228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.247634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.247830] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [300.248008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [300.248249] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [300.248382] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [300.248625] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [300.249300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [300.249438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [300.255635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [300.255734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [300.255875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [300.257035] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [300.260557] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [300.304975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [300.304984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [300.304987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [300.304989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [300.305191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.306301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [300.307437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [300.307599] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [300.307622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [300.312334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [300.362983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [300.363732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [300.369624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [300.370966] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [300.371445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [300.371737] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [300.371876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [300.372059] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [305.470688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [305.471082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [305.471792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [305.472473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [305.473248] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.474003] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.474723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.475223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.475400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [305.475649] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [305.475782] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [305.476031] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [305.476706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [305.476840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [305.483020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [305.483186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [305.483422] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [305.484019] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [305.488023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [305.519195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [305.519204] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.519206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [305.519208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [305.519419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.519855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [305.520172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.520302] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [305.520322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [305.524798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [305.594835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [305.595612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [305.597140] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [305.597158] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [305.597165] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [305.600301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [305.601659] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [305.601890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [305.602170] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [305.602309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [305.602486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [306.746705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [306.758646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [306.759045] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [306.759774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [306.760579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [306.761320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.762164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.762973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.763722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [306.764579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [306.764830] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [306.764965] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [306.765248] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [306.765938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [306.766077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [306.772218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [306.772307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [306.777192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [306.807422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [306.807430] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [306.807433] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [306.807435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [306.807806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.807947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [306.808261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.808394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [306.808415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [306.813950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [306.818809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [306.823661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [306.856728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [306.856736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [306.856738] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [306.856741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [306.856942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.857069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [306.857377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [306.857902] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [306.857944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [306.862826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [306.867701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [306.867851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [306.872529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [306.873898] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [306.874158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [306.874438] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [306.874593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [306.874781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [310.689701] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [310.690909] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [310.693867] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [310.694035] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [310.694168] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [310.694307] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A]

<7> [310.694464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [310.694610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [310.694750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [310.694890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [310.695027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [310.695165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [310.695301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [310.695454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [310.695587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [310.695720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [310.695853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [310.695985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [310.696117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [310.696248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [310.696390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [310.696526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [310.696661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [310.696794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [310.696927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [310.697060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [310.697192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [310.697325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [310.697467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [310.697604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [310.697736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [310.697868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [310.698000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [310.698133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [310.698264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [310.698412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [310.698545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [310.698677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [310.698809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [310.698941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [310.699073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [310.699205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [310.699336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [310.699478] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [310.699636] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [310.699771] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [310.699906] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [310.700039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [310.700171] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [310.700301] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [310.700441] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [310.700574] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [310.700721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1

<7> [310.700858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [310.700991] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [310.701138] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [310.701287] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [310.701432] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0

<7> [310.701570] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0

<7> [310.701708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset]

<7> [310.701843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [310.701977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [310.702110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [310.702245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [310.702386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [310.702520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [310.702653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [310.702785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [310.702916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [310.703047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [310.703179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [310.703312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [310.703454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [310.703587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [310.703720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [310.703852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [310.703984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [310.704116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [310.704247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [310.704382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [310.704514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [310.704648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [310.704783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [310.704917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [310.705050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.705182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.705314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.705489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.705621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.705753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [310.705884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.706015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.706146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [310.706277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [310.706420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [310.706551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [310.706684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [310.706814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [310.706946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [310.707076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [310.707207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [310.707338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [310.707477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [310.719748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [310.719836] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [310.719981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [310.720157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [310.720402] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.720613] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.720818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.721021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [310.721204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [310.721676] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [310.721810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [310.722222] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [310.722909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [310.723047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [310.732843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [310.732991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [310.733212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [310.734062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [310.735499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [310.735652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [310.735788] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [310.735924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [310.736060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [310.736194] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [310.736328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [310.736514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [310.736739] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]

<7> [310.736877] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [310.737070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [310.737282] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [310.737405] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d

<7> [310.738189] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [310.738336] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [310.756274] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a

<7> [310.756582] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation

<7> [310.757351] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [310.757782] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [310.759639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [310.760150] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [310.763987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [310.785585] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive

<7> [310.789886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [310.789894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [310.789896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [310.789901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [310.790099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.790248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [310.790567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [310.790717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [310.795353] Console: switching to colour frame buffer device 240x67

<7> [310.795304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [310.799513] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress