<5>[ 0.000000] Linux version 6.18.0-rc7-CI_DRM_17605-ge1c1b3e03e35+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Nov 28 11:09:37 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem305: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem307: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000022] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000024] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000614] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000616] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005067] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005079] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005115] Using GB pages for direct mapping <6>[ 0.005960] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005963] printk: early log buf free: 258736(98%) <6>[ 0.005964] Secure boot disabled <6>[ 0.005967] ACPI: Early table checksum verification disabled <6>[ 0.005972] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005977] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005982] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005986] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005988] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005989] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005991] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005992] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005994] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005995] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005997] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005999] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.006000] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.006002] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.006003] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.006005] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.006006] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.006008] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.006009] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.006011] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.006012] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006014] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.006016] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.006017] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.006019] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.006020] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.006022] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.006023] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.006025] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.006026] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.006028] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006030] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.006032] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.006033] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006035] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.006036] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.006038] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.006039] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.006041] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.006042] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006044] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006046] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.006047] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.006049] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.006050] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.006052] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.006053] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.006055] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.006056] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.006058] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.006058] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.006058] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.006059] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.006059] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.006060] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.006060] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.006060] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.006061] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.006061] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.006061] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.006062] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.006062] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.006063] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.006063] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.006063] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.006064] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.006064] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.006064] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.006065] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.006065] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.006066] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.006066] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.006066] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.006067] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.006067] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.006067] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.006068] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.006068] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.006069] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.006069] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.006069] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.006070] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.006070] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.006070] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.006071] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.006071] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.006072] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.006072] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.006073] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.006073] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.006074] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.006074] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.006074] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.006075] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006165] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006378] No NUMA configuration found <6>[ 0.006379] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006386] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006530] Zone ranges: <6>[ 0.006531] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006533] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006534] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006534] Device empty <6>[ 0.006535] Movable zone start for each node <6>[ 0.006536] Early memory node ranges <6>[ 0.006536] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006537] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006538] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006538] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006539] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006546] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006568] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008730] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.050944] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051457] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051464] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051465] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051468] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051515] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051517] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051519] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051522] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051523] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051538] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.051546] TSC deadline timer available <6>[ 0.051549] CPU topo: Max. logical packages: 1 <6>[ 0.051550] CPU topo: Max. logical dies: 1 <6>[ 0.051550] CPU topo: Max. dies per package: 1 <6>[ 0.051555] CPU topo: Max. threads per core: 2 <6>[ 0.051555] CPU topo: Num. cores per package: 16 <6>[ 0.051556] CPU topo: Num. threads per package: 22 <6>[ 0.051557] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051578] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051579] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051581] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.051583] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.051585] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.051587] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051590] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051591] Booting paravirtualized kernel on bare hardware <6>[ 0.051594] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051609] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.053130] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.053138] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.053139] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.053144] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.053146] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.053174] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.053290] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.053315] random: crng init done <6>[ 0.056157] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057566] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057707] software IO TLB: area num 32. <6>[ 0.069141] Fallback order for Node 0: 0 <6>[ 0.069145] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.069147] Policy zone: Normal <6>[ 0.069161] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.069162] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.069166] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070621] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112720] ********************************************************** <4>[ 0.112721] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112721] ** ** <4>[ 0.112722] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112722] ** via the console, logs, and other interfaces. This ** <4>[ 0.112722] ** might reduce the security of your system. ** <4>[ 0.112722] ** ** <4>[ 0.112723] ** If you see this message and you are not debugging ** <4>[ 0.112723] ** the kernel, report this immediately to your system ** <4>[ 0.112723] ** administrator! ** <4>[ 0.112723] ** ** <4>[ 0.112724] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112724] ** ** <4>[ 0.112724] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112724] ********************************************************** <6>[ 0.114202] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.124785] ftrace: allocating 60621 entries in 240 pages <6>[ 0.124787] ftrace: allocated 240 pages with 4 groups <6>[ 0.126554] Dynamic Preempt: voluntary <6>[ 0.127598] Running RCU self tests <6>[ 0.127599] Running RCU synchronous self tests <6>[ 0.127600] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.127600] rcu: RCU lockdep checking is enabled. <6>[ 0.127600] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.127601] Trampoline variant of Tasks RCU enabled. <6>[ 0.127602] Rude variant of Tasks RCU enabled. <6>[ 0.127602] Tracing variant of Tasks RCU enabled. <6>[ 0.127602] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.127603] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127732] Running RCU synchronous self tests <6>[ 0.127741] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127746] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127750] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.139584] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.140155] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.140743] Console: colour dummy device 80x25 <6>[ 0.140753] printk: legacy console [tty0] enabled <6>[ 0.141912] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.141920] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.141924] ... MAX_LOCK_DEPTH: 48 <6>[ 0.141928] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.141931] ... CLASSHASH_SIZE: 4096 <6>[ 0.141935] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.141939] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.141943] ... CHAINHASH_SIZE: 262144 <6>[ 0.141947] memory used by lock dependency info: 54145 kB <6>[ 0.141951] memory used for stack traces: 4224 kB <6>[ 0.141956] per task-struct memory footprint: 1920 bytes <6>[ 0.142026] ACPI: Core revision 20250807 <6>[ 0.143034] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.143091] APIC: Switch to symmetric I/O mode setup <6>[ 0.143097] DMAR: Host address width 42 <6>[ 0.143101] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.143136] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.143145] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.143164] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.143172] DMAR: SATC flags: 0x1 <6>[ 0.143181] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.143187] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.143191] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.144901] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.149317] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.149336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.149403] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.149409] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.149606] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.149610] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.149618] process: using mwait in idle threads <6>[ 0.149625] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.149637] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.149644] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.149649] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.149654] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.149662] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.149680] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.149687] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.149692] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.149697] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.149703] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.149709] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.149716] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.149721] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.149726] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.149731] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.149736] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.150330] Freeing SMP alternatives memory: 56K <6>[ 0.150330] pid_max: default: 32768 minimum: 301 <6>[ 0.150330] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.150330] landlock: Up and running. <6>[ 0.150330] Yama: becoming mindful. <6>[ 0.150330] AppArmor: AppArmor initialized <6>[ 0.150330] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150330] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150330] Running RCU synchronous self tests <6>[ 0.150330] Running RCU synchronous self tests <6>[ 0.150330] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.150330] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.150500] core: cpu_core PMU driver: <6>[ 0.150509] ... version: 5 <6>[ 0.150513] ... bit width: 48 <6>[ 0.150517] ... generic counters: 8 <6>[ 0.150520] ... generic bitmap: 00000000000000ff <6>[ 0.150525] ... fixed-purpose counters: 4 <6>[ 0.150529] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.150533] ... value mask: 0000ffffffffffff <6>[ 0.150538] ... max period: 00007fffffffffff <6>[ 0.150542] ... global_ctrl mask: 0001000f000000ff <6>[ 0.150730] signal: max sigframe size: 3632 <6>[ 0.150761] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.150912] rcu: Hierarchical SRCU implementation. <6>[ 0.150918] rcu: Max phase no-delay instances is 400. <6>[ 0.151098] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.153757] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.154545] smp: Bringing up secondary CPUs ... <6>[ 0.155032] smpboot: x86: Booting SMP configuration: <6>[ 0.155044] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010044] core: cpu_atom PMU driver: <6>[ 0.010044] ... version: 5 <6>[ 0.010044] ... bit width: 48 <6>[ 0.010044] ... generic counters: 8 <6>[ 0.010044] ... generic bitmap: 00000000000000ff <6>[ 0.010044] ... fixed-purpose counters: 3 <6>[ 0.010044] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010044] ... value mask: 0000ffffffffffff <6>[ 0.010044] ... max period: 00007fffffffffff <6>[ 0.010044] ... global_ctrl mask: 00000007000000ff <5>[ 0.169455] #2 #4 #5 #7 #9 #11 <6>[ 0.175420] smp: Brought up 1 node, 22 CPUs <6>[ 0.175420] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.178500] Memory: 32225896K/33040228K available (25429K kernel code, 5652K rwdata, 9520K rodata, 5704K init, 68232K bss, 779976K reserved, 0K cma-reserved) <6>[ 0.182600] devtmpfs: initialized <6>[ 0.182793] x86/mm: Memory block size: 128MB <6>[ 0.208383] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.209093] Running RCU synchronous self tests <6>[ 0.209113] Running RCU synchronous self tests <6>[ 0.209382] Running RCU Tasks wait API self tests <6>[ 0.209382] Running RCU Tasks Rude wait API self tests <6>[ 0.209382] Running RCU Tasks Trace wait API self tests <6>[ 0.222358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.222735] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.223041] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.223654] pinctrl core: initialized pinctrl subsystem <6>[ 0.224331] PM: RTC time: 12:23:54, date: 2025-11-28 <6>[ 0.225211] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.226434] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.226833] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.227235] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.227302] audit: initializing netlink subsys (disabled) <5>[ 0.227377] audit: type=2000 audit(1764332634.078:1): state=initialized audit_enabled=0 res=1 <6>[ 0.228156] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.228158] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.228164] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.228169] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.228173] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.228215] cpuidle: using governor ladder <6>[ 0.228341] cpuidle: using governor menu <6>[ 0.228446] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.228941] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.228971] PCI: Using configuration type 1 for base access <6>[ 0.229404] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.230370] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.230377] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.230383] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.230388] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.233359] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.233367] raid6: using avx2x2 recovery algorithm <6>[ 0.233986] fbcon: Taking over console <6>[ 0.234152] ACPI: Added _OSI(Module Device) <6>[ 0.234156] ACPI: Added _OSI(Processor Device) <6>[ 0.234160] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.241340] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.931616] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.951926] ACPI: EC: EC started <6>[ 0.951941] ACPI: EC: interrupt blocked <6>[ 0.957494] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.957505] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.073336] Callback from call_rcu_tasks() invoked. <6>[ 1.250384] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.250401] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.314881] ACPI: Interpreter enabled <6>[ 1.315031] ACPI: PM: (supports S0 S4 S5) <6>[ 1.315038] ACPI: Using IOAPIC for interrupt routing <6>[ 1.321377] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.321386] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.361318] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.361350] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.464288] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.834732] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.856632] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.864731] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.880276] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.887157] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.894737] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.902054] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.149038] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.149674] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.150231] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.285064] ACPI: \_TZ_.FN00: New power resource <6>[ 2.285753] ACPI: \_TZ_.FN01: New power resource <6>[ 2.286379] ACPI: \_TZ_.FN02: New power resource <6>[ 2.287073] ACPI: \_TZ_.FN03: New power resource <6>[ 2.288131] ACPI: \_TZ_.FN04: New power resource <6>[ 2.291257] ACPI: \PIN_: New power resource <6>[ 2.294641] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.294661] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.297493] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.302360] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.322836] PCI host bridge to bus 0000:00 <6>[ 2.322899] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.322915] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.322930] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.322946] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.322961] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.322980] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.340518] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.341955] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.342003] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.342019] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.342076] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.342091] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.342157] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.342332] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.342332] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.344763] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.344817] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.347459] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.347502] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.347522] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.349322] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.349364] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.349383] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.349537] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.349640] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.359504] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.359552] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.359567] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.359588] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.359708] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.359794] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.368697] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.368745] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.368760] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.368781] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.368900] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.368980] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.378152] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.378213] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.379042] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.379081] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.379100] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.379496] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.379538] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.379552] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.380427] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.380480] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.380558] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.384273] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.384357] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.384373] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.384443] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.384452] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.387173] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.387224] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.387298] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.392242] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.392294] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.392367] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.396336] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.396371] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.396386] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.396902] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.396994] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.409720] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.409786] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.421682] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.421747] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.433693] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.433758] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.445763] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.445827] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.445906] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.450877] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.450930] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.450941] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.451346] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.451410] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.462126] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.462190] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.474746] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.477427] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.477552] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.477573] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.477706] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.478582] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.478643] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.478661] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.480999] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.481113] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.481748] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.481837] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.481936] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.484809] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.484977] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.487174] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.487492] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.487796] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.900654] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 7.698283] Low-power S0 idle used by default for system suspend <6>[ 7.784865] ACPI: EC: interrupt unblocked <6>[ 7.784885] ACPI: EC: event unblocked <6>[ 7.785332] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.785332] ACPI: EC: GPE=0x6e <6>[ 7.785332] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.785332] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.787581] iommu: Default domain type: Translated <6>[ 7.787581] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.790758] SCSI subsystem initialized <7>[ 7.791635] libata version 3.00 loaded. <6>[ 7.791677] ACPI: bus type USB registered <6>[ 7.791677] usbcore: registered new interface driver usbfs <6>[ 7.791677] usbcore: registered new interface driver hub <6>[ 7.791718] usbcore: registered new device driver usb <6>[ 7.792012] pps_core: LinuxPPS API ver. 1 registered <6>[ 7.792021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 7.792065] PTP clock support registered <6>[ 7.793435] EDAC MC: Ver: 3.0.0 <6>[ 7.794439] efivars: Registered efivars operations <6>[ 7.796680] NetLabel: Initializing <6>[ 7.796691] NetLabel: domain hash size = 128 <6>[ 7.796700] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 7.796841] NetLabel: unlabeled traffic allowed by default <6>[ 7.796876] mctp: management component transport protocol core <6>[ 7.796887] NET: Registered PF_MCTP protocol family <6>[ 7.796972] PCI: Using ACPI for IRQ routing <7>[ 7.814862] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.815053] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 7.815258] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.815275] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 7.815280] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 7.815285] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 7.816454] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.816454] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.816454] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.816454] vgaarb: loaded <6>[ 7.825789] clocksource: Switched to clocksource tsc-early <5>[ 7.834083] VFS: Disk quotas dquot_6.6.0 <6>[ 7.834133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 7.836254] AppArmor: AppArmor Filesystem Enabled <6>[ 7.836602] pnp: PnP ACPI init <6>[ 7.838251] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.838273] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.839468] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.841896] system 00:03: [io 0x06a4] has been reserved <6>[ 7.841914] system 00:03: [io 0x06a0] has been reserved <4>[ 7.879110] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 7.879135] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.879390] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.879408] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.879430] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.879449] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.879467] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.879483] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.889266] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 7.892230] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.896967] pnp: PnP ACPI: found 8 devices <6>[ 7.915075] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.916050] NET: Registered PF_INET protocol family <6>[ 7.916353] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.920251] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 7.920485] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.920774] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.922079] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 7.923631] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.924410] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.925462] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.926630] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.926714] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 7.926771] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 7.926791] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 7.926803] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 7.926815] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 7.926838] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 7.926864] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 7.926886] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 7.926908] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 7.926929] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 7.926955] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 7.926991] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.927005] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 7.927025] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.927054] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.927067] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 7.927080] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.927101] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.927110] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.927123] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 7.927136] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.927153] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.927163] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.927173] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.927184] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 7.927194] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.927207] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 7.927217] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.927226] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 7.927236] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.927248] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.927257] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 7.927267] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.929257] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.932258] PCI: CLS 0 bytes, default 64 <6>[ 7.932399] DMAR: No RMRR found <6>[ 7.932414] DMAR: No ATSR found <6>[ 7.932421] DMAR: dmar0: Using Queued invalidation <6>[ 7.932432] DMAR: dmar1: Using Queued invalidation <6>[ 7.933764] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.935715] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.935814] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.935915] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.936041] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.936177] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.936308] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.936409] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.936519] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.936620] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.936737] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.936809] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.936919] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.937040] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.937162] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.937308] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.937384] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.937462] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.937535] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.937656] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.937729] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.937846] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.937922] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.938080] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.938159] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.938235] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.938308] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.938383] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.938501] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.962452] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.962467] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.962478] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 7.966308] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.966559] clocksource: Switched to clocksource tsc <6>[ 7.966747] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 7.977557] Initialise system trusted keyrings <5>[ 7.977657] Key type blacklist registered <6>[ 7.977968] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 7.990552] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 7.990689] ntfs3: Enabled Linux POSIX ACLs support <6>[ 7.990698] ntfs3: Read-only LZX/Xpress compression included <5>[ 7.992793] integrity: Platform Keyring initialized <5>[ 7.992825] integrity: Machine keyring initialized <6>[ 8.001049] xor: automatically using best checksumming function avx <5>[ 8.001063] Key type asymmetric registered <5>[ 8.001078] Asymmetric key parser 'x509' registered <6>[ 8.001228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 8.001561] io scheduler mq-deadline registered <6>[ 8.005500] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 8.007450] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 8.009216] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 8.010483] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 8.012051] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 8.012345] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 8.012612] ACPI: button: Lid Switch [LID0] <6>[ 8.012813] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 8.012952] ACPI: button: Sleep Button [SLPB] <6>[ 8.013136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 8.013270] ACPI: button: Power Button [PWRB] <7>[ 8.020069] Monitor-Mwait will be used to enter C-1 state <7>[ 8.020107] Monitor-Mwait will be used to enter C-2 state <7>[ 8.020114] Monitor-Mwait will be used to enter C-3 state <6>[ 8.129359] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 8.129368] ACPI: thermal: Thermal Zone [TZ00] (41 C) <6>[ 8.130607] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 8.130970] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 8.132644] ACPI: battery: Slot [BAT0] (battery present) <6>[ 8.153432] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 8.165937] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 8.167499] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 8.189983] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 8.191823] hpet_acpi_add: no address or irqs in _CRS <6>[ 8.191916] Linux agpgart interface v0.103 <6>[ 8.219081] ACPI: bus type drm_connector registered <7>[ 8.220174] initcall simpledrm_platform_driver_init blacklisted <6>[ 8.247883] loop: module loaded <6>[ 8.298889] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 8.413749] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 8.502473] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 8.628495] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 8.718685] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 8.812335] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 8.908245] Key type psk registered <6>[ 8.910586] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 8.911788] nvme nvme0: pci function 0000:01:00.0 <6>[ 8.912180] tun: Universal TUN/TAP device driver, 1.6 <6>[ 8.913437] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.913579] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 8.915744] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.920131] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.920161] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 8.920184] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.921000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.921024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.921037] usb usb1: Product: xHCI Host Controller <6>[ 8.921052] usb usb1: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17605-ge1c1b3e03e35+ xhci-hcd <6>[ 8.921066] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 8.922257] hub 1-0:1.0: USB hub found <6>[ 8.922380] hub 1-0:1.0: 1 port detected <6>[ 8.926762] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.926780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.926793] usb usb2: Product: xHCI Host Controller <6>[ 8.926802] usb usb2: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17605-ge1c1b3e03e35+ xhci-hcd <6>[ 8.926816] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 8.927835] hub 2-0:1.0: USB hub found <6>[ 8.927914] hub 2-0:1.0: 4 ports detected <6>[ 8.961913] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.961951] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 8.963870] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.965814] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.965843] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 8.965869] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.966117] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.966133] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.966146] usb usb3: Product: xHCI Host Controller <6>[ 8.966155] usb usb3: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17605-ge1c1b3e03e35+ xhci-hcd <6>[ 8.966168] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 8.967029] hub 3-0:1.0: USB hub found <6>[ 8.967095] hub 3-0:1.0: 12 ports detected <6>[ 8.983722] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 9.007909] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 9.007929] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.007942] usb usb4: Product: xHCI Host Controller <6>[ 9.007951] usb usb4: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17605-ge1c1b3e03e35+ xhci-hcd <6>[ 9.007964] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 9.008911] hub 4-0:1.0: USB hub found <6>[ 9.008964] hub 4-0:1.0: 2 ports detected <6>[ 9.015692] usbcore: registered new interface driver usb-storage <6>[ 9.015919] usbcore: registered new interface driver usbserial_generic <6>[ 9.016011] usbserial: USB Serial support registered for generic <6>[ 9.016108] usbcore: registered new interface driver ftdi_sio <6>[ 9.016157] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 9.016243] usbcore: registered new interface driver pl2303 <6>[ 9.016288] usbserial: USB Serial support registered for pl2303 <6>[ 9.016438] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 9.016450] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 9.018839] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 9.028238] nvme0n1: p1 p2 <3>[ 9.717676] i8042: Can't read CTR while initializing i8042 <3>[ 9.717692] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.719561] mousedev: PS/2 mouse device common for all mice <6>[ 9.720847] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.722620] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.722798] rtc_cmos rtc_cmos: setting system clock to 2025-11-28T12:24:03 UTC (1764332643) <6>[ 9.723003] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.723075] i2c_dev: i2c /dev entries driver <6>[ 9.728028] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.728051] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 9.728067] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.728111] device-mapper: uevent: version 1.0.3 <6>[ 9.728535] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.728557] intel_pstate: Intel P-state driver initializing <6>[ 9.736777] intel_pstate: HWP enabled <6>[ 9.736792] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.736803] sdhci: Copyright(c) Pierre Ossman <6>[ 9.737030] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.742947] drop_monitor: Initializing network drop monitor service <6>[ 9.743295] NET: Registered PF_INET6 protocol family <6>[ 9.745267] Segment Routing with IPv6 <6>[ 9.745340] In-situ OAM (IOAM) with IPv6 <6>[ 9.745416] NET: Registered PF_PACKET protocol family <5>[ 9.745621] Key type dns_resolver registered <4>[ 9.759716] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.761765] microcode: Current revision: 0x0000001c <6>[ 9.763890] IPI shorthand broadcast: enabled <6>[ 9.790458] sched_clock: Marking stable (9781000899, 9044511)->(9881437624, -91392214) <6>[ 9.792292] registered taskstats version 1 <5>[ 9.797461] Loading compiled-in X.509 certificates <6>[ 9.844119] Demotion targets for Node 0: null <6>[ 9.844392] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 9.844404] kmemleak: Automatic memory scanning thread started <5>[ 9.844659] Key type .fscrypt registered <5>[ 9.844664] Key type fscrypt-provisioning registered <6>[ 9.848003] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.848116] Key type trusted registered <5>[ 9.855222] Key type encrypted registered <6>[ 9.855228] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 9.855359] Loading compiled-in module X.509 certificates <5>[ 9.856027] Loaded X.509 cert 'Build time autogenerated kernel key: 7dec0001a253778aa598c08cc7bfc2a217ae7182' <6>[ 9.856038] ima: Allocated hash algorithm: sha256 <6>[ 9.895985] ima: No architecture policies found <6>[ 9.896129] evm: Initialising EVM extended attributes: <6>[ 9.896135] evm: security.selinux <6>[ 9.896140] evm: security.SMACK64 <6>[ 9.896145] evm: security.SMACK64EXEC <6>[ 9.896149] evm: security.SMACK64TRANSMUTE <6>[ 9.896154] evm: security.SMACK64MMAP <6>[ 9.896159] evm: security.apparmor <6>[ 9.896163] evm: security.ima <6>[ 9.896167] evm: security.capability <6>[ 9.896171] evm: HMAC attrs: 0x1 <6>[ 9.898736] PM: Magic number: 1:232:381 <6>[ 9.898971] netconsole: network logging started <6>[ 9.899707] RAS: Correctable Errors collector initialized. <6>[ 9.900550] clk: Disabling unused clocks <6>[ 9.900565] PM: genpd: Disabling unused power domains <4>[ 9.900727] check access for rdinit=/init failed: -2, ignoring <6>[ 9.900733] md: Waiting for all devices to be available before autodetect <6>[ 9.900738] md: If you don't use raid, use raid=noautodetect <6>[ 9.900743] md: Autodetecting RAID arrays. <6>[ 9.900750] md: autorun ... <6>[ 9.900753] md: ... autorun DONE. <6>[ 9.934340] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 9.947882] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 9.947908] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 9.947921] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 9.947931] usb 4-1: Manufacturer: Realtek <6>[ 9.947939] usb 4-1: SerialNumber: 000001 <6>[ 9.975410] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 9.975478] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.976976] devtmpfs: mounted <6>[ 9.993170] Freeing unused decrypted memory: 2036K <6>[ 9.994486] Freeing unused kernel image (initmem) memory: 5704K <6>[ 9.994513] Write protecting the kernel read-only data: 36864k <6>[ 9.996350] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 9.996879] Freeing unused kernel image (rodata/data gap) memory: 720K <6>[ 10.002928] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 10.002960] Run /sbin/init as init process <7>[ 10.002964] with arguments: <7>[ 10.002965] /sbin/init <7>[ 10.002966] with environment: <7>[ 10.002967] HOME=/ <7>[ 10.002967] TERM=linux <7>[ 10.088068] systemd[1]: Inserted module 'autofs4' <7>[ 10.129864] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 10.129892] systemd[1]: Detected architecture x86-64. <7>[ 10.131967] systemd[1]: Hostname set to . <7>[ 10.412312] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.451637] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.453715] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.455515] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.455781] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.456497] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.456630] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 10.456724] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.456813] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.456888] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.456962] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.457040] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.457308] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.457729] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.458043] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.458425] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.458726] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.458976] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.459412] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.459789] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.460120] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.460338] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.460922] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.461243] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.465358] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.468502] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.471542] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.474449] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.484845] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.487933] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.491113] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.494522] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.496901] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.499253] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.501837] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.505844] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.508530] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.509087] systemd-journald[308]: Collecting audit messages is disabled. <7>[ 10.511978] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.514721] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.517303] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.521882] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 10.522066] pstore: Using crash dump compression: deflate <6>[ 10.523705] pstore: Registered efi_pstore as persistent store backend <7>[ 10.527089] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.527237] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.527302] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.532140] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 10.534945] fuse: init (API version 7.45) <7>[ 10.537250] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.679279] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 10.719347] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:952238080k SS <7>[ 10.734739] systemd-journald[308]: Received client request to flush runtime journal. <7>[ 10.759325] systemd-journald[308]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.759339] systemd-journald[308]: Rotating system journal. <4>[ 11.534267] nvme nvme0: using unchecked data buffer <6>[ 11.648478] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.709307] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.740543] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 11.751212] intel-hid INTC1077:00: platform supports 5 button array <6>[ 11.756477] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 11.819391] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 11.819570] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 11.928340] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 11.928365] caller igen6_probe+0x190/0x9e0 [igen6_edac] mapping multiple BARs <6>[ 11.937702] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.943106] ACPI: bus type thunderbolt registered <6>[ 11.958339] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.960421] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.962127] EDAC igen6: v2.5.1 <6>[ 11.971649] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 11.975365] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 11.975369] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 11.975379] pci 0000:00:08.0: Setting to D3hot <6>[ 11.981534] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 11.982002] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 11.982982] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 11.982988] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 11.987081] pci 0000:00:05.0: Setting to D3hot <6>[ 11.999705] intel_pmc_core INT33A1:00: initialized <6>[ 12.034811] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.037207] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 12.037325] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 12.063735] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 12.063741] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.063743] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.063744] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 12.063746] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.078436] idma64 idma64.3: Found Intel integrated DMA 64-bit <5>[ 12.094899] audit: type=1400 audit(1764332645.870:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=590 comm="apparmor_parser" <5>[ 12.095332] audit: type=1400 audit(1764332645.871:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=591 comm="apparmor_parser" <5>[ 12.095771] audit: type=1400 audit(1764332645.871:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=589 comm="apparmor_parser" <5>[ 12.096459] audit: type=1400 audit(1764332645.872:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=587 comm="apparmor_parser" <5>[ 12.096826] audit: type=1400 audit(1764332645.872:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=592 comm="apparmor_parser" <5>[ 12.097294] audit: type=1400 audit(1764332645.872:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=593 comm="apparmor_parser" <5>[ 12.098777] audit: type=1400 audit(1764332645.874:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=594 comm="apparmor_parser" <5>[ 12.100894] audit: type=1400 audit(1764332645.876:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=595 comm="apparmor_parser" <5>[ 12.101760] audit: type=1400 audit(1764332645.877:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=596 comm="apparmor_parser" <5>[ 12.103545] audit: type=1400 audit(1764332645.879:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=597 comm="apparmor_parser" <6>[ 12.129552] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 12.156868] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 12.164648] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 12.188029] usbcore: registered new device driver r8152-cfgselector <6>[ 12.192242] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 12.344798] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.347111] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.347703] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.382210] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 12.382218] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 12.382341] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 12.383529] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 12.390199] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.402467] intel_rapl_common: Found RAPL domain package <6>[ 12.402745] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.538000] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 12.538060] intel_rapl_msr: PL4 support detected. <6>[ 12.542889] usbcore: registered new interface driver r8152 <6>[ 12.543969] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.552364] intel_rapl_common: Found RAPL domain package <6>[ 12.552369] intel_rapl_common: Found RAPL domain core <6>[ 12.552578] intel_rapl_common: Found RAPL domain uncore <6>[ 12.552581] intel_rapl_common: Found RAPL domain psys <6>[ 12.569006] usbcore: registered new interface driver cdc_ether <6>[ 12.580589] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.596973] usbcore: registered new interface driver r8153_ecm <6>[ 12.604975] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.618586] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 12.623948] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 12.630911] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 12.635552] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.635576] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.648132] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.659988] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.661671] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.670039] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 12.704698] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.708586] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.710122] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.710307] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.712519] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.713473] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.714368] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.716345] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.716843] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.717346] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.722895] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.723243] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.727039] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.727057] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.731065] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.731454] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.735121] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.735531] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.739741] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.740494] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.741596] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.744824] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.808430] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.814066] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.817414] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.823163] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.827525] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.833169] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.838107] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.843356] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.846257] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.850366] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.854207] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.857718] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.861777] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.866074] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.869769] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.872938] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.876839] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.881122] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.885010] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.890765] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.903600] r8152 4-1:1.0 enxe2015072f451: renamed from eth1 <4>[ 13.000369] block nvme0n1: No UUID available providing old NGUID <6>[ 13.098167] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 13.201064] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.324855] loop0: detected capacity change from 0 to 8 <6>[ 13.527296] Consider using thermal netlink events interface <6>[ 15.438307] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 21.791174] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 23.675698] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.678168] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 32.614188] systemd-journald[308]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 49.854820] [IGT] i915_module_load: executing <4>[ 49.854868] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.886578] [IGT] i915_module_load: starting subtest load <4>[ 50.454324] ********************************************************** <4>[ 50.454325] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.454326] ** ** <4>[ 50.454326] ** trace_printk() being used. Allocating extra memory. ** <4>[ 50.454327] ** ** <4>[ 50.454327] ** This means that this is a DEBUG kernel and it is ** <4>[ 50.454328] ** unsafe for production use. ** <4>[ 50.454329] ** ** <4>[ 50.454329] ** If you see this message and you are not debugging ** <4>[ 50.454330] ** the kernel, report this immediately to your vendor! ** <4>[ 50.454330] ** ** <4>[ 50.454331] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.454332] ********************************************************** <5>[ 50.483968] Setting dangerous option force_probe - tainting kernel <6>[ 50.488528] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 50.489619] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.489877] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 50.490064] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 50.490238] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 50.490437] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 50.490618] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 50.490821] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.491073] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 50.491320] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 50.491518] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 50.492044] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 50.492207] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 50.492656] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 50.492799] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 50.493216] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 50.493492] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 50.493629] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 50.493764] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 50.493898] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 50.494266] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 50.494875] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 50.494884] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 50.495171] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 50.495681] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 50.495937] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1995fff], io: n/a <7>[ 50.496096] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 50.496455] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 50.496648] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 50.496805] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 50.496957] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 50.497126] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 50.497301] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 50.497471] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 50.497629] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 50.497801] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 50.497969] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 50.498150] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 50.498323] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 50.498498] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 50.498667] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 50.498833] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 50.498993] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 50.499179] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.499341] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.499495] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.499647] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 50.499799] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.499953] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.500132] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.500294] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.500445] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.500595] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.500747] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.500905] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.501071] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.501231] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.501380] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.501530] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.501679] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.501832] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.501988] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.502156] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.502314] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.502465] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.502618] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.503303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 50.503469] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 50.503626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 50.503782] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 50.503937] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 50.504104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 50.504265] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 50.504418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 50.504567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 50.504727] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 50.504884] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 50.505044] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 50.505254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 50.505412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 50.505570] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 50.505723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 50.505873] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 50.506026] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 50.506208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 50.506369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.506522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 50.506675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.506826] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.506979] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 50.507146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.507307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.507459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.507609] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.507758] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.507909] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.508080] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 50.508263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.508478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 50.508673] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.508904] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 50.509169] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 50.509353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 50.509515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 50.509676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.509884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 50.510068] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 50.510094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 50.510271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 50.510431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 50.510591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 50.511456] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 50.512784] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 50.514035] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 50.514314] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 50.514559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 50.514788] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 50.514984] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 50.515191] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 50.515342] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 50.515493] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 50.515668] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 50.515823] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 50.515974] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 50.516148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 50.516299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 50.517732] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 50.517961] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 50.518150] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 50.518319] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 50.518482] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 50.518644] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 50.518815] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 50.518977] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 50.519156] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.519320] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 50.519485] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.519647] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 50.519810] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.519970] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 50.520156] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.520326] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 50.520503] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 50.520688] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 50.520871] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.521042] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 50.521218] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.521381] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 50.521553] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.521673] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 50.521730] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 50.521907] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.522089] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 50.522271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 50.522446] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 50.522623] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.522791] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 50.522971] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.523165] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 50.523385] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 50.523572] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 50.523801] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.523999] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 50.524196] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.524375] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 50.528479] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.528675] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 50.528858] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 50.530302] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:265:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.532352] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:265:DDI A/PHY A] <7>[ 50.532592] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 50.532769] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 50.532935] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 50.533122] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.533288] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <6>[ 50.533392] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 50.533460] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.533629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 50.533790] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.533944] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.534133] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:265:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.534367] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.534539] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.534689] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.534836] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.534983] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.535310] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.535650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.537159] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.537434] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.538651] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.539022] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 50.539603] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 50.540342] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 50.540797] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 50.542104] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.547894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.547903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 50.547907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 50.547961] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:266:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.548425] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:266:eDP-1] Performing OUI wait (0 ms) <7>[ 50.548894] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:266:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.549078] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:266:eDP-1] DRRS type: none <7>[ 50.549325] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:266:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.549822] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:266:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.550042] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.550209] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.550379] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.550546] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.550701] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.550981] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.551282] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:274:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.551476] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:274:DDI B/PHY B] <7>[ 50.552032] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:274:DDI B/PHY B] <7>[ 50.552282] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:274:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.552665] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:292:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.552945] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.553234] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:292:DDI TC1/PHY TC1] <7>[ 50.553602] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:301:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.553839] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.554215] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.554441] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:301:DDI TC2/PHY TC2] <7>[ 50.554608] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:301:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.554841] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:305:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.555084] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.555319] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:305:DDI TC3/PHY TC3] <7>[ 50.555652] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:314:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.555880] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.556120] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:314:DDI TC4/PHY TC4] <7>[ 50.557042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 50.557423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:147:pipe B] hw state readout: disabled <7>[ 50.557763] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:205:pipe C] hw state readout: disabled <7>[ 50.558084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:263:pipe D] hw state readout: disabled <7>[ 50.558258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 50.558454] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 50.558630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 50.558791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 50.558950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 50.559117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 50.559287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 1B] hw state readout: disabled, pipe B <7>[ 50.559472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:plane 2B] hw state readout: disabled, pipe B <7>[ 50.559654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 3B] hw state readout: disabled, pipe B <7>[ 50.559819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:121:plane 4B] hw state readout: disabled, pipe B <7>[ 50.559976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:131:plane 5B] hw state readout: disabled, pipe B <7>[ 50.560142] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:141:cursor B] hw state readout: disabled, pipe B <7>[ 50.560313] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:149:plane 1C] hw state readout: disabled, pipe C <7>[ 50.560495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:159:plane 2C] hw state readout: disabled, pipe C <7>[ 50.560665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 3C] hw state readout: disabled, pipe C <7>[ 50.560821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:179:plane 4C] hw state readout: disabled, pipe C <7>[ 50.560977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:189:plane 5C] hw state readout: disabled, pipe C <7>[ 50.561143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:199:cursor C] hw state readout: disabled, pipe C <7>[ 50.561310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:207:plane 1D] hw state readout: disabled, pipe D <7>[ 50.561480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:217:plane 2D] hw state readout: disabled, pipe D <7>[ 50.561642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:227:plane 3D] hw state readout: disabled, pipe D <7>[ 50.561797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:237:plane 4D] hw state readout: disabled, pipe D <7>[ 50.561952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:247:plane 5D] hw state readout: disabled, pipe D <7>[ 50.562136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:257:cursor D] hw state readout: disabled, pipe D <7>[ 50.563090] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.563301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.563474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:274:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.563631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.563779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.563927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.564082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.564284] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.564448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.564595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.564740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:295:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.564885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:296:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.565029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:297:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.565237] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.565392] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:301:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.565556] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.565713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:305:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.565865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:307:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.566016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:308:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.566172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:309:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.566334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:310:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.566516] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.566671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:314:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.566819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:316:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.566964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:317:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.567123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:318:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.567279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:319:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.568097] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 50.568264] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.568440] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.568600] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.568762] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.568923] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.569093] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.569264] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.569542] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:266:eDP-1] hw state readout: enabled <7>[ 50.569721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:275:DP-1] hw state readout: disabled <7>[ 50.569898] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled <7>[ 50.570085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:DP-2] hw state readout: disabled <7>[ 50.570255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:302:HDMI-A-2] hw state readout: disabled <7>[ 50.570434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:306:DP-3] hw state readout: disabled <7>[ 50.570613] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:315:DP-4] hw state readout: disabled <7>[ 50.570835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 50.570997] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 50.571154] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 50.571304] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 50.571455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 50.571606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 50.571758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:89:pipe A] min_cdclk 256910 kHz <7>[ 50.571904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 1B] min_cdclk 0 kHz <7>[ 50.572047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:plane 2B] min_cdclk 0 kHz <7>[ 50.572212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 3B] min_cdclk 0 kHz <7>[ 50.572361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:121:plane 4B] min_cdclk 0 kHz <7>[ 50.572509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:131:plane 5B] min_cdclk 0 kHz <7>[ 50.572658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:141:cursor B] min_cdclk 0 kHz <7>[ 50.572804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:147:pipe B] min_cdclk 0 kHz <7>[ 50.572950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:149:plane 1C] min_cdclk 0 kHz <7>[ 50.573105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:159:plane 2C] min_cdclk 0 kHz <7>[ 50.573254] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 3C] min_cdclk 0 kHz <7>[ 50.573399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:179:plane 4C] min_cdclk 0 kHz <7>[ 50.573544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:189:plane 5C] min_cdclk 0 kHz <7>[ 50.573688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:199:cursor C] min_cdclk 0 kHz <7>[ 50.573833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:205:pipe C] min_cdclk 0 kHz <7>[ 50.573980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:207:plane 1D] min_cdclk 0 kHz <7>[ 50.574137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:217:plane 2D] min_cdclk 0 kHz <7>[ 50.574282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:227:plane 3D] min_cdclk 0 kHz <7>[ 50.574426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:237:plane 4D] min_cdclk 0 kHz <7>[ 50.574569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:247:plane 5D] min_cdclk 0 kHz <7>[ 50.574713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:257:cursor D] min_cdclk 0 kHz <7>[ 50.574859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:263:pipe D] min_cdclk 0 kHz <7>[ 50.575210] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.575368] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:147:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.575522] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:205:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.575673] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:263:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.575820] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.575991] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.576160] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.576318] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.576548] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.576883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 50.577058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.577219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.577376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.577534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.577690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.577845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.577999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.578207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.578365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.578523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.578679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.578834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.578990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.579157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.579312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.579466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.579620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.579775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.579930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.580093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.580247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.580399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.580550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.580701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.580851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.581002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.581168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.581322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.581474] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.581630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.581784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.581936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.582098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.582250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.582400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.582550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.582705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.582859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.583013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.583179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.583332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.583484] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.583638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.583791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.583943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.584107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.584258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.584411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.584565] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.584717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.584868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:147:pipe B] enable: no [setup_hw_state] <7>[ 50.585022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:205:pipe C] enable: no [setup_hw_state] <7>[ 50.585189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:263:pipe D] enable: no [setup_hw_state] <7>[ 50.585342] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.585872] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.586040] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.586235] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.586755] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.593317] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.599488] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.599659] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.599811] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.599959] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.600124] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.600276] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.600434] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.603523] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.604109] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.604677] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.606922] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.607268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.607818] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.608011] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.609279] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.609473] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.609652] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.630951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.631182] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.631351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.631517] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.631677] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.631836] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.631993] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.632174] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.632330] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.632482] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.632634] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.632784] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.632935] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.633097] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.634071] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.644158] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1700MHz -> 2200MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.645070] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.646521] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.646523] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.646980] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.647296] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.647969] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.654586] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.654762] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.655738] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.655903] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.656567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.656721] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.657529] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.657681] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.658316] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.658464] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.660529] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.660727] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.660908] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.683086] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.683261] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.683425] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.683585] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.683741] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.683896] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.684061] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.684233] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.684384] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.684554] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.684716] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.684870] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.685024] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.685195] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.685351] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.689493] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.689856] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.690701] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.690709] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.704138] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 11ms, freq = 900MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.704769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.714140] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.714567] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.716090] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.716100] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.716460] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.716829] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.718255] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 50.725775] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.726002] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.726258] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.726488] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.726691] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.726889] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.727043] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.728671] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.729945] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 50.730169] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 50.730335] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 50.730492] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 50.730646] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 50.730798] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 0: start 0x98008 <7>[ 50.730952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 1: start 0x98108 <7>[ 50.731123] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 2: start 0x98208 <7>[ 50.731291] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 3: start 0x98308 <7>[ 50.731441] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 4: start 0x983c8 <7>[ 50.731588] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 0: start 0x52008 <7>[ 50.731735] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 1: start 0x52108 <7>[ 50.731887] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 2: start 0x52208 <7>[ 50.732064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 3: start 0x52308 <7>[ 50.732248] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 4: start 0x523c8 <7>[ 50.732396] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 0: start 0x59008 <7>[ 50.732542] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 1: start 0x59108 <7>[ 50.732688] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 2: start 0x59208 <7>[ 50.732834] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 3: start 0x59308 <7>[ 50.732985] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 4: start 0x593c8 <7>[ 50.733463] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.733627] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.733807] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.733977] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.734181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.734343] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.734489] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.734649] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.734861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:147:pipe B] enable: no [fastset] <7>[ 50.735035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:205:pipe C] enable: no [fastset] <7>[ 50.735226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:263:pipe D] enable: no [fastset] <7>[ 50.737046] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.737239] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 50.737531] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.737698] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.746959] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:147:pipe B] <7>[ 50.747362] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:205:pipe C] <7>[ 50.747696] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:263:pipe D] <7>[ 50.751304] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:266:eDP-1] adding connector to sysfs <7>[ 50.753866] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:266:eDP-1] backlight device intel_backlight registered <7>[ 50.754081] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:266:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.754261] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:266:eDP-1] Panel prepare <7>[ 50.754774] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.756259] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:266:eDP-1] generating connector hotplug event <7>[ 50.756325] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:DP-1] adding connector to sysfs <7>[ 50.756738] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.757537] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:DP-1] generating connector hotplug event <7>[ 50.757575] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs <7>[ 50.757896] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event <7>[ 50.757926] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:DP-2] adding connector to sysfs <7>[ 50.758983] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.760989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:DP-2] generating connector hotplug event <7>[ 50.761070] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:302:HDMI-A-2] adding connector to sysfs <7>[ 50.761658] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:302:HDMI-A-2] generating connector hotplug event <7>[ 50.761722] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:306:DP-3] adding connector to sysfs <7>[ 50.762439] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.763523] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:306:DP-3] generating connector hotplug event <7>[ 50.763557] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:315:DP-4] adding connector to sysfs <7>[ 50.763915] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.764883] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:315:DP-4] generating connector hotplug event <6>[ 50.764911] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.767320] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.779826] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.783045] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.784156] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.784377] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.785682] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.785691] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.785726] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 50.785930] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:147:pipe B] not active, skipping <7>[ 50.786127] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:205:pipe C] not active, skipping <7>[ 50.786289] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:263:pipe D] not active, skipping <7>[ 50.786454] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 50.786618] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:89:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.786777] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 50.786939] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:147:pipe B] not active, skipping <6>[ 50.786921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.787109] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:205:pipe C] not active, skipping <7>[ 50.787258] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:263:pipe D] not active, skipping <7>[ 50.787404] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.787732] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.788184] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.788294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 50.790786] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.792649] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:275:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.792883] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.792829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 50.793711] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.793744] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.797100] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.797272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 50.797816] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.798099] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.798457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 50.798818] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.803080] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:302:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.803265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 50.803547] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.803767] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:306:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.803931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 50.804184] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.804410] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:315:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.804574] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.804751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 50.805130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 50.806452] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.806941] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.807312] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.807549] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.808007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.808013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 50.808017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 50.808066] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 50.808225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.808385] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.809372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] status updated from unknown to connected <7>[ 50.809602] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.809657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 50.809670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.809677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 50.809682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 50.814116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 50.814125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 50.814130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 50.818507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 50.818515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 50.818520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 50.819400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 50.819408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 50.819412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 50.823967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 50.823974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 50.823978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 50.824277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 50.824282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 50.824285] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 50.824572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 50.824575] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 50.824578] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 50.824581] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 50.824583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 50.824585] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 50.824587] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 50.824589] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 50.824716] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.824733] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 50.824736] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.824747] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.824853] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.824873] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.825111] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.826339] fbcon: i915drmfb (fb0) is primary device <7>[ 50.827475] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:266:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.827711] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:265:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 50.827887] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.828075] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.828274] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:265:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 50.828454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.828637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.828808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.828982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.829164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.829345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.829532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.829700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.829871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.830038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.830222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.830390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.830551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.830713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.830875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.831035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.831237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.831459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.831695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.831931] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.832162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.832417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.832625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.832820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.833009] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.833207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.833410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.833588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.833765] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.833960] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 50.834365] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.834648] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.834915] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.835239] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.835489] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.835732] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.835973] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.836220] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.836467] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.836712] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.836964] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.837211] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.837452] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.837692] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.837927] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.838170] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.838408] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.838655] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.838899] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.839148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.839389] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.839623] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.839857] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.840097] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.840376] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.840562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.840739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.840916] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.841113] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.841337] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 50.841528] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 50.841722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 50.841891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.842065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.842236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.842421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.842607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.842766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.842926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.843090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.843254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.843439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.843431] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.843618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.843647] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.843787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.843828] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.843943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.843998] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.844129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.844183] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.844297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.844364] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.844481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.844547] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.844661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.844722] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.844820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.844878] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.844979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.845040] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.845172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.845247] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.845344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.845452] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.845523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.845635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.845703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.845805] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.845870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.845970] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.846057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.846143] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.846224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.846311] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.846402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.846495] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.846583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.846673] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.846757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.846834] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.846917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.846994] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.847090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.847156] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.847245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.847312] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.847404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.847490] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.847571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.847658] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.847744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.847823] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.847913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.847986] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.848080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.848145] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.848239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.848313] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.848424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.848494] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.848604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.848668] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.848769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.848819] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.848925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.848970] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.849084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.849129] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.849241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.849294] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.849425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.849476] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.849608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.849780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.849940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.850106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.850290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.850475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.850659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.850828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.850995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.851168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.851339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.851524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.851716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:324] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.851880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.852040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.852219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 50.852385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 50.852552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 50.852717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 50.852881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <6>[ 50.857471] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 50.858567] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 50.859617] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.860638] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.861514] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 50.868853] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 50.889597] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.889800] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 51.061163] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:266:eDP-1] set backlight PWM = 0 <7>[ 51.062343] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 51.071035] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turn panel power off <7>[ 51.071383] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 51.071577] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 51.071984] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 51.072053] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - short <7>[ 51.122353] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.123362] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 51.123423] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 51.123928] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.124205] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - long <7>[ 51.124447] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 51.124696] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 51.125107] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 51.125761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 51.126415] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 51.126779] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 51.127103] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DDI A/PHY A] <7>[ 51.127385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DDI B/PHY B] <7>[ 51.127662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST A] <7>[ 51.127814] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST B] <7>[ 51.127967] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST C] <7>[ 51.128147] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST D] <7>[ 51.128328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI TC1/PHY TC1] <7>[ 51.128542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST A] <7>[ 51.128701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:295:DP-MST B] <7>[ 51.128848] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:296:DP-MST C] <7>[ 51.128994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:297:DP-MST D] <7>[ 51.129153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:301:DDI TC2/PHY TC2] <7>[ 51.129308] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:305:DDI TC3/PHY TC3] <7>[ 51.129455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DP-MST A] <7>[ 51.129600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:308:DP-MST B] <7>[ 51.129748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:309:DP-MST C] <7>[ 51.129894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:310:DP-MST D] <7>[ 51.130042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:314:DDI TC4/PHY TC4] <7>[ 51.130203] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:316:DP-MST A] <7>[ 51.130347] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DP-MST B] <7>[ 51.130497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:318:DP-MST C] <7>[ 51.130650] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST D] <7>[ 51.130891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 51.132137] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 51.132339] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 51.134014] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turn panel power on <7>[ 51.134221] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 51.352289] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.615794] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.706039] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.706917] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.707645] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.738919] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.739628] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - long <7>[ 51.740217] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.740905] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 51.809440] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.809477] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.809477] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.809761] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.916501] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.917688] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.918463] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.922170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.923172] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.924040] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.925125] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.925908] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.926883] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.927031] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.928361] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.928508] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.929158] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.929466] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.929619] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.929846] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:266:eDP-1] set backlight PWM = 192000 <7>[ 51.940625] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.943439] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:266:eDP-1] <7>[ 51.944500] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7>[ 51.946796] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.948187] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 51.948844] Console: switching to colour frame buffer device 180x56 <7>[ 51.948747] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 51.949202] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:266:eDP-1] set backlight level = 13892 <6>[ 51.966120] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.966154] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.966414] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.966585] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.966751] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.966915] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.967079] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.967242] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.967410] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.967573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.967734] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.967896] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.968054] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.968210] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.968372] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.968532] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.968691] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.968849] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.969004] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.969160] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.969328] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.969486] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.969643] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.970113] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.970302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.970643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.970851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.971123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.971277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.971419] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.971555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.971688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.971821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.971951] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.972080] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.972210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.972337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.972464] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.972590] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.972715] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.972842] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.972970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.973096] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.973258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.973384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.973511] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.973637] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.973763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.973889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.974015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.974144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.974275] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.974401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.974527] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.974650] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.974773] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.974898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.975022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.975154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.975281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.975406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.975531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.975655] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.975778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.975901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.976028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.976174] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.976301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.976425] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.976549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.976675] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.976801] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.976926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.977062] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.977186] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.977309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.977436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.977562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.977688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.977813] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.977937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.978086] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.978211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.978334] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.978458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.978583] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.978709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.978833] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.978964] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.979091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.979214] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.979336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.979462] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.979588] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.979712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.979835] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.979967] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.979968] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.979968] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.985230] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.985389] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.985655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 51.985664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 51.986447] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.986897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.987038] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.987173] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.987389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.987393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 51.987398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 51.987420] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 51.987561] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.987715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.988737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 51.988746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.988749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 51.988752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 51.992833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 51.992838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 51.992841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 51.996953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 51.996957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 51.996960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 51.997393] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.997622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 51.997626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 51.997629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 51.997940] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 52.002065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 52.002069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 52.002072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 52.002361] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.002576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 52.002579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 52.002582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 52.002817] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.003025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 52.003027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 52.003031] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 52.003033] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 52.003034] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 52.003036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 52.003038] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 52.003039] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 52.003157] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 52.003175] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 52.003177] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 52.003204] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 52.007843] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 52.011261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 52.018984] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 52.019059] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 52.019752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 52.019773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 52.021092] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 52.021765] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 52.022085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 52.022318] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 52.022572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 52.022576] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 52.022581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 52.022600] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 52.022755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 52.022908] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 52.023779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 52.023787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 52.023791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 52.023794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 52.027901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 52.027906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 52.027909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 52.032020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 52.032024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 52.032026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 52.032384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 52.032387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 52.032389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 52.036591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 52.036595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 52.036598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 52.036878] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 52.036884] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 52.036887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 52.037150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 52.037153] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 52.037155] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 52.037157] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 52.037159] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 52.037160] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 52.037162] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 52.037163] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 52.037253] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 52.037266] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 52.037268] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 52.037293] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 52.040881] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 52.043319] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 52.052070] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 52.074231] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 52.074337] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 52.077227] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 52.107668] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 52.107791] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 52.108166] [IGT] i915_module_load: exiting, ret=0 <7>[ 53.047973] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.048085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.049047] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.049019] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.482584] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.483327] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 54.483924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 54.484705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 54.485153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02