<5>[ 0.000000] Linux version 6.18.0-rc7-CI_DRM_17587-g5c99707b435e+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Nov 25 19:01:42 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem302: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem304: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000021] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000604] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000605] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005069] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005080] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005105] Using GB pages for direct mapping <6>[ 0.005832] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005834] printk: early log buf free: 258736(98%) <6>[ 0.005836] Secure boot disabled <6>[ 0.005838] ACPI: Early table checksum verification disabled <6>[ 0.005843] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005847] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005852] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005856] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005858] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005859] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005861] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005863] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005864] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005866] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005867] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005869] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005870] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005872] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005874] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005876] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005877] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005879] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005880] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005882] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005884] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005885] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005887] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005888] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005890] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005892] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005895] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005896] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005898] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005899] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005901] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005902] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005904] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005905] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005907] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005908] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005910] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005911] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005913] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005914] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005916] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005917] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005919] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005920] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005922] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005924] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005925] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005926] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005928] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005928] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.005928] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005929] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005929] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005929] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005930] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005930] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005931] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005931] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005931] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005932] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005932] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005932] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005933] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005933] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005934] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005934] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005934] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005935] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005935] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005935] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005936] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005936] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005937] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005937] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005937] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005938] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005938] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005938] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005939] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005939] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005939] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005940] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005940] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005941] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005941] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005941] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005942] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005942] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005943] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005943] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005944] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005944] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005944] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006036] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006244] No NUMA configuration found <6>[ 0.006245] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006252] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006398] Zone ranges: <6>[ 0.006400] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006401] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006402] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006403] Device empty <6>[ 0.006403] Movable zone start for each node <6>[ 0.006404] Early memory node ranges <6>[ 0.006404] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006405] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006406] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006406] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006408] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006414] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006436] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008614] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.050536] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051014] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051019] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051020] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051023] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051068] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051070] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051072] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051075] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051075] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051089] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.051097] TSC deadline timer available <6>[ 0.051099] CPU topo: Max. logical packages: 1 <6>[ 0.051100] CPU topo: Max. logical dies: 1 <6>[ 0.051100] CPU topo: Max. dies per package: 1 <6>[ 0.051102] CPU topo: Max. threads per core: 2 <6>[ 0.051103] CPU topo: Num. cores per package: 16 <6>[ 0.051103] CPU topo: Num. threads per package: 22 <6>[ 0.051103] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051120] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051121] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051123] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.051124] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.051125] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.051127] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051129] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051130] Booting paravirtualized kernel on bare hardware <6>[ 0.051133] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051145] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052651] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.052658] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052660] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052664] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052668] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052694] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052818] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052840] random: crng init done <6>[ 0.055641] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057040] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057177] software IO TLB: area num 32. <6>[ 0.069220] Fallback order for Node 0: 0 <6>[ 0.069224] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.069225] Policy zone: Normal <6>[ 0.069239] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.069240] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.069244] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070801] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112650] ********************************************************** <4>[ 0.112651] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112651] ** ** <4>[ 0.112651] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112652] ** via the console, logs, and other interfaces. This ** <4>[ 0.112652] ** might reduce the security of your system. ** <4>[ 0.112652] ** ** <4>[ 0.112652] ** If you see this message and you are not debugging ** <4>[ 0.112652] ** the kernel, report this immediately to your system ** <4>[ 0.112653] ** administrator! ** <4>[ 0.112653] ** ** <4>[ 0.112653] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112653] ** ** <4>[ 0.112654] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112654] ********************************************************** <6>[ 0.114124] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.124622] ftrace: allocating 60599 entries in 240 pages <6>[ 0.124624] ftrace: allocated 240 pages with 4 groups <6>[ 0.126398] Dynamic Preempt: voluntary <6>[ 0.127473] Running RCU self tests <6>[ 0.127473] Running RCU synchronous self tests <6>[ 0.127474] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.127474] rcu: RCU lockdep checking is enabled. <6>[ 0.127475] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.127475] Trampoline variant of Tasks RCU enabled. <6>[ 0.127476] Rude variant of Tasks RCU enabled. <6>[ 0.127476] Tracing variant of Tasks RCU enabled. <6>[ 0.127476] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.127477] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127603] Running RCU synchronous self tests <6>[ 0.127611] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127617] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127621] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.139521] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.140101] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.140716] Console: colour dummy device 80x25 <6>[ 0.140726] printk: legacy console [tty0] enabled <6>[ 0.141899] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.141908] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.141911] ... MAX_LOCK_DEPTH: 48 <6>[ 0.141915] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.141919] ... CLASSHASH_SIZE: 4096 <6>[ 0.141923] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.141927] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.141931] ... CHAINHASH_SIZE: 262144 <6>[ 0.141935] memory used by lock dependency info: 54145 kB <6>[ 0.141940] memory used for stack traces: 4224 kB <6>[ 0.141944] per task-struct memory footprint: 1920 bytes <6>[ 0.142016] ACPI: Core revision 20250807 <6>[ 0.143036] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.143093] APIC: Switch to symmetric I/O mode setup <6>[ 0.143099] DMAR: Host address width 42 <6>[ 0.143103] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.143143] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.143152] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.143171] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.143178] DMAR: SATC flags: 0x1 <6>[ 0.143189] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.143195] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.143199] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.144890] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.149306] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.149326] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.149393] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.149399] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.149599] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.149604] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.149611] process: using mwait in idle threads <6>[ 0.149619] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.149631] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.149638] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.149643] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.149648] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.149656] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.149674] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.149680] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.149685] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.149690] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.149696] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.149702] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.149708] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.149713] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.149718] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.149724] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.149729] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.150320] Freeing SMP alternatives memory: 56K <6>[ 0.150320] pid_max: default: 32768 minimum: 301 <6>[ 0.150320] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.150320] landlock: Up and running. <6>[ 0.150320] Yama: becoming mindful. <6>[ 0.150320] AppArmor: AppArmor initialized <6>[ 0.150320] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150320] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150320] Running RCU synchronous self tests <6>[ 0.150320] Running RCU synchronous self tests <6>[ 0.150320] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.150320] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.150506] core: cpu_core PMU driver: <6>[ 0.150515] ... version: 5 <6>[ 0.150519] ... bit width: 48 <6>[ 0.150523] ... generic counters: 8 <6>[ 0.150527] ... generic bitmap: 00000000000000ff <6>[ 0.150532] ... fixed-purpose counters: 4 <6>[ 0.150536] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.150541] ... value mask: 0000ffffffffffff <6>[ 0.150545] ... max period: 00007fffffffffff <6>[ 0.150550] ... global_ctrl mask: 0001000f000000ff <6>[ 0.150742] signal: max sigframe size: 3632 <6>[ 0.150771] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.150936] rcu: Hierarchical SRCU implementation. <6>[ 0.150941] rcu: Max phase no-delay instances is 400. <6>[ 0.151120] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.153894] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.154772] smp: Bringing up secondary CPUs ... <6>[ 0.155200] smpboot: x86: Booting SMP configuration: <6>[ 0.155207] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010081] core: cpu_atom PMU driver: <6>[ 0.010081] ... version: 5 <6>[ 0.010081] ... bit width: 48 <6>[ 0.010081] ... generic counters: 8 <6>[ 0.010081] ... generic bitmap: 00000000000000ff <6>[ 0.010081] ... fixed-purpose counters: 3 <6>[ 0.010081] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010081] ... value mask: 0000ffffffffffff <6>[ 0.010081] ... max period: 00007fffffffffff <6>[ 0.010081] ... global_ctrl mask: 00000007000000ff <5>[ 0.169736] #2 #4 #5 #7 #9 #11 <6>[ 0.176396] smp: Brought up 1 node, 22 CPUs <6>[ 0.176396] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.179489] Memory: 32226104K/33040228K available (25421K kernel code, 5652K rwdata, 9516K rodata, 5704K init, 68232K bss, 779976K reserved, 0K cma-reserved) <6>[ 0.183575] devtmpfs: initialized <6>[ 0.183708] x86/mm: Memory block size: 128MB <6>[ 0.209169] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.209984] Running RCU synchronous self tests <6>[ 0.210002] Running RCU synchronous self tests <6>[ 0.210019] Running RCU Tasks wait API self tests <6>[ 0.210325] Running RCU Tasks Rude wait API self tests <6>[ 0.210328] Running RCU Tasks Trace wait API self tests <6>[ 0.223346] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.223565] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.223859] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.224482] pinctrl core: initialized pinctrl subsystem <6>[ 0.225216] PM: RTC time: 08:30:22, date: 2025-11-26 <6>[ 0.226101] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.227358] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.227759] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.228161] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.228230] audit: initializing netlink subsys (disabled) <5>[ 0.228360] audit: type=2000 audit(1764145821.079:1): state=initialized audit_enabled=0 res=1 <6>[ 0.229184] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.229186] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.229192] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.229197] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.229203] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.229255] cpuidle: using governor ladder <6>[ 0.229255] cpuidle: using governor menu <6>[ 0.229432] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.229950] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.229983] PCI: Using configuration type 1 for base access <6>[ 0.230397] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.231403] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.231403] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.231403] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.231403] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.234412] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.234420] raid6: using avx2x2 recovery algorithm <6>[ 0.235041] fbcon: Taking over console <6>[ 0.235235] ACPI: Added _OSI(Module Device) <6>[ 0.235239] ACPI: Added _OSI(Processor Device) <6>[ 0.235243] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.242329] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.840706] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.861001] ACPI: EC: EC started <6>[ 0.861017] ACPI: EC: interrupt blocked <6>[ 0.867344] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.867344] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.958993] Callback from call_rcu_tasks() invoked. <6>[ 1.174084] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.174101] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.269140] ACPI: Interpreter enabled <6>[ 1.269344] ACPI: PM: (supports S0 S4 S5) <6>[ 1.269353] ACPI: Using IOAPIC for interrupt routing <6>[ 1.282095] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.282112] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.333862] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.333903] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.403858] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.741870] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.776185] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.790152] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.815871] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.827221] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.840689] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.853544] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.123348] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.123974] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.124537] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.289671] ACPI: \_TZ_.FN00: New power resource <6>[ 2.290775] ACPI: \_TZ_.FN01: New power resource <6>[ 2.291855] ACPI: \_TZ_.FN02: New power resource <6>[ 2.292963] ACPI: \_TZ_.FN03: New power resource <6>[ 2.294055] ACPI: \_TZ_.FN04: New power resource <6>[ 2.300620] ACPI: \PIN_: New power resource <6>[ 2.305320] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.305320] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.309436] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.317521] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.340874] PCI host bridge to bus 0000:00 <6>[ 2.340936] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.340952] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.340967] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.340983] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.340999] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.341017] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.359344] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.361325] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.361325] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.361325] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.361325] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.361325] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.361325] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.361370] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.361383] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.364191] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.364246] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.367340] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.367340] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.367340] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.368593] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.368634] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.368651] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.368800] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.368902] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.378966] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.379008] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.379024] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.379045] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.379166] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.379248] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.388973] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.389015] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.389030] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.389051] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.389172] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.389252] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.398198] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.398259] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.399345] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.399345] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.399345] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.399888] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.399930] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.399945] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.401325] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.401325] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.401325] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.404757] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.404850] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.404864] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.404932] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.404941] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.407954] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.408005] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.408077] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.413284] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.413337] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.413378] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.417461] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.417523] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.417539] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.418028] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.418122] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.430724] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.430801] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.443747] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.443823] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.456720] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.456788] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.469921] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.469986] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.470066] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.475110] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.475164] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.475175] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.475594] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.475665] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.486357] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.486433] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.498874] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.501494] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.501617] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.501638] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.501771] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.502720] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.502783] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.502800] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.505181] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.505294] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.505709] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.505798] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.505897] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.509037] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.509205] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.511492] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.511834] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.512143] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.943235] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 7.779678] Low-power S0 idle used by default for system suspend <6>[ 7.900599] ACPI: EC: interrupt unblocked <6>[ 7.900618] ACPI: EC: event unblocked <6>[ 7.900655] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.900667] ACPI: EC: GPE=0x6e <6>[ 7.900679] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.900698] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.902808] iommu: Default domain type: Translated <6>[ 7.902808] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.905986] SCSI subsystem initialized <7>[ 7.906048] libata version 3.00 loaded. <6>[ 7.906378] ACPI: bus type USB registered <6>[ 7.906507] usbcore: registered new interface driver usbfs <6>[ 7.906572] usbcore: registered new interface driver hub <6>[ 7.906644] usbcore: registered new device driver usb <6>[ 7.906824] pps_core: LinuxPPS API ver. 1 registered <6>[ 7.906829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 7.906854] PTP clock support registered <6>[ 7.906995] EDAC MC: Ver: 3.0.0 <6>[ 7.907725] efivars: Registered efivars operations <6>[ 7.909846] NetLabel: Initializing <6>[ 7.909852] NetLabel: domain hash size = 128 <6>[ 7.909856] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 7.909933] NetLabel: unlabeled traffic allowed by default <6>[ 7.909953] mctp: management component transport protocol core <6>[ 7.909959] NET: Registered PF_MCTP protocol family <6>[ 7.910018] PCI: Using ACPI for IRQ routing <7>[ 7.921938] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.922125] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 7.922310] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.922320] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 7.922326] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 7.922329] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 7.922622] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.922622] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.922622] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.922622] vgaarb: loaded <6>[ 7.931485] clocksource: Switched to clocksource tsc-early <5>[ 7.939842] VFS: Disk quotas dquot_6.6.0 <6>[ 7.939873] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 7.941216] AppArmor: AppArmor Filesystem Enabled <6>[ 7.941438] pnp: PnP ACPI init <6>[ 7.942555] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.942567] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.943279] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.944720] system 00:03: [io 0x06a4] has been reserved <6>[ 7.944732] system 00:03: [io 0x06a0] has been reserved <4>[ 7.967973] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 7.967986] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.968136] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.968146] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.968158] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.968168] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.968177] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.968185] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.973387] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 7.974602] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.977836] pnp: PnP ACPI: found 8 devices <6>[ 7.992410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.992807] NET: Registered PF_INET protocol family <6>[ 7.993114] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.997045] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 7.997264] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.997554] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.998983] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 8.000527] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 8.001307] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 8.002353] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 8.003535] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 8.003631] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 8.003690] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 8.003710] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 8.003722] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 8.003734] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 8.003757] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 8.003779] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 8.003801] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 8.003823] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 8.003845] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 8.003867] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 8.003901] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 8.003915] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 8.003934] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 8.003959] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 8.003971] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 8.003984] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 8.004001] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 8.004015] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 8.004028] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 8.004040] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 8.004058] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 8.004069] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 8.004079] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 8.004095] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 8.004106] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 8.004119] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 8.004129] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 8.004138] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 8.004148] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 8.004161] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 8.004170] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 8.004180] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 8.006312] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 8.009338] PCI: CLS 0 bytes, default 64 <6>[ 8.009495] DMAR: No RMRR found <6>[ 8.009511] DMAR: No ATSR found <6>[ 8.009518] DMAR: dmar0: Using Queued invalidation <6>[ 8.009529] DMAR: dmar1: Using Queued invalidation <6>[ 8.010782] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 8.013005] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 8.013112] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 8.013210] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 8.013338] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 8.013469] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 8.013607] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 8.013712] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 8.013813] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 8.013913] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 8.014042] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 8.014115] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 8.014230] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 8.014352] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 8.014429] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 8.014572] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 8.014643] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 8.014732] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 8.014805] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 8.014939] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 8.015021] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 8.015147] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 8.015221] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 8.015382] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 8.015456] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 8.015530] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 8.015611] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 8.015686] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 8.015816] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 8.039964] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 8.039979] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 8.039990] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 8.043884] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 8.044132] clocksource: Switched to clocksource tsc <6>[ 8.044333] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 8.055684] Initialise system trusted keyrings <5>[ 8.055797] Key type blacklist registered <6>[ 8.056216] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 8.069027] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 8.069170] ntfs3: Enabled Linux POSIX ACLs support <6>[ 8.069179] ntfs3: Read-only LZX/Xpress compression included <5>[ 8.070714] integrity: Platform Keyring initialized <5>[ 8.070749] integrity: Machine keyring initialized <6>[ 8.079126] xor: automatically using best checksumming function avx <5>[ 8.079140] Key type asymmetric registered <5>[ 8.079156] Asymmetric key parser 'x509' registered <6>[ 8.079306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 8.079764] io scheduler mq-deadline registered <6>[ 8.083362] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 8.085989] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 8.088224] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 8.090172] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 8.092728] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 8.093200] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 8.093587] ACPI: button: Lid Switch [LID0] <6>[ 8.093979] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 8.094247] ACPI: button: Sleep Button [SLPB] <6>[ 8.094564] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 8.094813] ACPI: button: Power Button [PWRB] <7>[ 8.105145] Monitor-Mwait will be used to enter C-1 state <7>[ 8.105167] Monitor-Mwait will be used to enter C-2 state <7>[ 8.105175] Monitor-Mwait will be used to enter C-3 state <6>[ 8.238113] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 8.238128] ACPI: thermal: Thermal Zone [TZ00] (46 C) <6>[ 8.239883] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 8.240308] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 8.241758] ACPI: battery: Slot [BAT0] (battery present) <6>[ 8.263806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 8.283183] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 8.285789] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 8.309150] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 8.311845] hpet_acpi_add: no address or irqs in _CRS <6>[ 8.311972] Linux agpgart interface v0.103 <6>[ 8.340747] ACPI: bus type drm_connector registered <7>[ 8.342540] initcall simpledrm_platform_driver_init blacklisted <6>[ 8.374211] loop: module loaded <6>[ 8.429559] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 8.533517] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 8.634107] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 8.731821] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 8.845233] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 8.935914] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 9.044884] Key type psk registered <6>[ 9.047266] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 9.048076] nvme nvme0: pci function 0000:01:00.0 <6>[ 9.048805] tun: Universal TUN/TAP device driver, 1.6 <6>[ 9.050162] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 9.050307] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 9.052367] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 9.054528] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 9.054556] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 9.054581] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 9.055018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 9.055044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.055056] usb usb1: Product: xHCI Host Controller <6>[ 9.055065] usb usb1: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17587-g5c99707b435e+ xhci-hcd <6>[ 9.055079] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 9.057307] hub 1-0:1.0: USB hub found <6>[ 9.057409] hub 1-0:1.0: 1 port detected <6>[ 9.060705] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 9.060717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.060725] usb usb2: Product: xHCI Host Controller <6>[ 9.060730] usb usb2: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17587-g5c99707b435e+ xhci-hcd <6>[ 9.060740] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 9.061412] hub 2-0:1.0: USB hub found <6>[ 9.061461] hub 2-0:1.0: 4 ports detected <6>[ 9.082102] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.082125] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 9.083692] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 9.085035] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.085050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 9.085061] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 9.085209] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 9.085216] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.085222] usb usb3: Product: xHCI Host Controller <6>[ 9.085227] usb usb3: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17587-g5c99707b435e+ xhci-hcd <6>[ 9.085233] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 9.085770] hub 3-0:1.0: USB hub found <6>[ 9.085803] hub 3-0:1.0: 12 ports detected <6>[ 9.112677] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 9.112696] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.112709] usb usb4: Product: xHCI Host Controller <6>[ 9.112717] usb usb4: Manufacturer: Linux 6.18.0-rc7-CI_DRM_17587-g5c99707b435e+ xhci-hcd <6>[ 9.112731] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 9.113627] hub 4-0:1.0: USB hub found <6>[ 9.113679] hub 4-0:1.0: 2 ports detected <6>[ 9.119626] usbcore: registered new interface driver usb-storage <6>[ 9.119861] usbcore: registered new interface driver usbserial_generic <6>[ 9.119965] usbserial: USB Serial support registered for generic <6>[ 9.120053] usbcore: registered new interface driver ftdi_sio <6>[ 9.120105] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 9.120202] usbcore: registered new interface driver pl2303 <6>[ 9.120250] usbserial: USB Serial support registered for pl2303 <6>[ 9.120407] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 9.120420] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 9.124746] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 9.160281] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 9.170379] nvme0n1: p1 p2 <3>[ 9.821927] i8042: Can't read CTR while initializing i8042 <3>[ 9.821939] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.822920] mousedev: PS/2 mouse device common for all mice <6>[ 9.824695] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.827153] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.827364] rtc_cmos rtc_cmos: setting system clock to 2025-11-26T08:30:31 UTC (1764145831) <6>[ 9.827679] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.827792] i2c_dev: i2c /dev entries driver <6>[ 9.833519] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.833546] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 9.833565] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.833634] device-mapper: uevent: version 1.0.3 <6>[ 9.834252] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.834281] intel_pstate: Intel P-state driver initializing <6>[ 9.851845] intel_pstate: HWP enabled <6>[ 9.851869] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.851878] sdhci: Copyright(c) Pierre Ossman <6>[ 9.852153] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.855715] drop_monitor: Initializing network drop monitor service <6>[ 9.855951] NET: Registered PF_INET6 protocol family <6>[ 9.857262] Segment Routing with IPv6 <6>[ 9.857309] In-situ OAM (IOAM) with IPv6 <6>[ 9.857365] NET: Registered PF_PACKET protocol family <5>[ 9.857564] Key type dns_resolver registered <4>[ 9.870922] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.872428] microcode: Current revision: 0x0000001c <6>[ 9.874363] IPI shorthand broadcast: enabled <6>[ 9.889070] sched_clock: Marking stable (9879000743, 9081171)->(9981074433, -92992519) <6>[ 9.890068] registered taskstats version 1 <5>[ 9.893119] Loading compiled-in X.509 certificates <6>[ 9.941822] Demotion targets for Node 0: null <6>[ 9.942018] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 9.942025] kmemleak: Automatic memory scanning thread started <5>[ 9.942301] Key type .fscrypt registered <5>[ 9.942306] Key type fscrypt-provisioning registered <6>[ 9.945646] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.945759] Key type trusted registered <5>[ 9.951161] Key type encrypted registered <6>[ 9.951167] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 9.951403] Loading compiled-in module X.509 certificates <5>[ 9.952073] Loaded X.509 cert 'Build time autogenerated kernel key: 02fcc3e9250ea914c0dc1c90bbcf39fa97d8e8be' <6>[ 9.952090] ima: Allocated hash algorithm: sha256 <6>[ 9.993427] ima: No architecture policies found <6>[ 9.993568] evm: Initialising EVM extended attributes: <6>[ 9.993575] evm: security.selinux <6>[ 9.993579] evm: security.SMACK64 <6>[ 9.993584] evm: security.SMACK64EXEC <6>[ 9.993589] evm: security.SMACK64TRANSMUTE <6>[ 9.993594] evm: security.SMACK64MMAP <6>[ 9.993598] evm: security.apparmor <6>[ 9.993602] evm: security.ima <6>[ 9.993606] evm: security.capability <6>[ 9.993611] evm: HMAC attrs: 0x1 <6>[ 9.996368] PM: Magic number: 1:311:524 <6>[ 9.996381] usb usb3-port7: hash matches <6>[ 9.996485] acpi LNXPOWER:08: hash matches <6>[ 9.996634] netconsole: network logging started <6>[ 9.997339] RAS: Correctable Errors collector initialized. <6>[ 9.998186] clk: Disabling unused clocks <6>[ 9.998202] PM: genpd: Disabling unused power domains <4>[ 9.998372] check access for rdinit=/init failed: -2, ignoring <6>[ 9.998379] md: Waiting for all devices to be available before autodetect <6>[ 9.998384] md: If you don't use raid, use raid=noautodetect <6>[ 9.998388] md: Autodetecting RAID arrays. <6>[ 9.998947] md: autorun ... <6>[ 9.998952] md: ... autorun DONE. <6>[ 10.038411] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 10.052206] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 10.052235] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 10.052248] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 10.052257] usb 4-1: Manufacturer: Realtek <6>[ 10.052265] usb 4-1: SerialNumber: 000001 <6>[ 10.081805] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 10.081877] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 10.083114] devtmpfs: mounted <6>[ 10.099661] Freeing unused decrypted memory: 2036K <6>[ 10.100976] Freeing unused kernel image (initmem) memory: 5704K <6>[ 10.101004] Write protecting the kernel read-only data: 36864k <6>[ 10.102274] Freeing unused kernel image (text/rodata gap) memory: 1200K <6>[ 10.102904] Freeing unused kernel image (rodata/data gap) memory: 724K <6>[ 10.109030] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 10.109137] Run /sbin/init as init process <7>[ 10.109146] with arguments: <7>[ 10.109147] /sbin/init <7>[ 10.109148] with environment: <7>[ 10.109149] HOME=/ <7>[ 10.109151] TERM=linux <7>[ 10.193104] systemd[1]: Inserted module 'autofs4' <7>[ 10.229765] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 10.229798] systemd[1]: Detected architecture x86-64. <7>[ 10.231926] systemd[1]: Hostname set to . <7>[ 10.503353] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.537192] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.539269] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.540979] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.541261] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.541976] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.542116] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 10.542210] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.542301] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.542376] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.542449] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.542528] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.542788] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.543224] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.543549] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.543926] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.544238] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.544478] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.544813] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.545195] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.545519] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.545731] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.546299] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.546620] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.550435] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.553641] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.557248] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.560303] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.568854] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.571944] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.575099] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.578016] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.580821] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.583314] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.586173] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.588534] systemd-journald[308]: Collecting audit messages is disabled. <7>[ 10.588637] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.590936] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.593612] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.598039] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.600349] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.605389] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 10.607163] pstore: Using crash dump compression: deflate <6>[ 10.609421] pstore: Registered efi_pstore as persistent store backend <7>[ 10.610888] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.611019] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.611080] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 10.613245] fuse: init (API version 7.45) <7>[ 10.615224] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 10.620136] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.771646] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 10.808313] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:952238080k SS <7>[ 10.818931] systemd-journald[308]: Received client request to flush runtime journal. <7>[ 10.843706] systemd-journald[308]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.843732] systemd-journald[308]: Rotating system journal. <4>[ 11.566516] nvme nvme0: using unchecked data buffer <6>[ 11.758729] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.769444] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.790264] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 11.815638] intel-hid INTC1077:00: platform supports 5 button array <6>[ 11.838590] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 11.956756] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 11.956922] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <5>[ 12.028662] audit: type=1400 audit(1764145833.699:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=590 comm="apparmor_parser" <5>[ 12.029096] audit: type=1400 audit(1764145833.699:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=586 comm="apparmor_parser" <5>[ 12.029563] audit: type=1400 audit(1764145833.700:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=588 comm="apparmor_parser" <5>[ 12.029959] audit: type=1400 audit(1764145833.700:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=589 comm="apparmor_parser" <5>[ 12.030364] audit: type=1400 audit(1764145833.701:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=591 comm="apparmor_parser" <5>[ 12.032172] audit: type=1400 audit(1764145833.703:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=592 comm="apparmor_parser" <5>[ 12.034104] audit: type=1400 audit(1764145833.705:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=593 comm="apparmor_parser" <5>[ 12.041731] audit: type=1400 audit(1764145833.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=594 comm="apparmor_parser" <5>[ 12.049262] audit: type=1400 audit(1764145833.720:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=595 comm="apparmor_parser" <5>[ 12.050099] audit: type=1400 audit(1764145833.720:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=597 comm="apparmor_parser" <4>[ 12.130686] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 12.130712] caller igen6_probe+0x190/0x9e0 [igen6_edac] mapping multiple BARs <6>[ 12.132679] ACPI: bus type thunderbolt registered <6>[ 12.165887] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 12.170535] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 12.188695] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 12.188702] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 12.191075] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 12.191079] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 12.196939] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 12.206634] pci 0000:00:08.0: Setting to D3hot <6>[ 12.218329] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 12.218415] pci 0000:00:05.0: Setting to D3hot <6>[ 12.218525] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 12.220782] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 12.225753] EDAC igen6: v2.5.1 <6>[ 12.230590] intel_pmc_core INT33A1:00: initialized <6>[ 12.268681] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 12.301223] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 12.331359] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.348735] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 12.348740] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.348742] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.348743] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 12.348744] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.350029] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 12.351264] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 12.351315] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 12.352978] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 12.380885] usbcore: registered new device driver r8152-cfgselector <6>[ 12.424833] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 12.553193] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.567273] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 12.578931] intel_rapl_common: Found RAPL domain package <6>[ 12.615966] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 12.615976] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 12.616536] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 12.658680] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.663196] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.683673] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 12.686842] usbcore: registered new interface driver r8152 <6>[ 12.688284] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.739330] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.749762] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.755532] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.756807] intel_rapl_msr: PL4 support detected. <6>[ 12.765562] usbcore: registered new interface driver cdc_ether <6>[ 12.804250] usbcore: registered new interface driver r8153_ecm <6>[ 12.838847] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.841301] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 12.843709] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 12.846961] intel_rapl_common: Found RAPL domain package <6>[ 12.846966] intel_rapl_common: Found RAPL domain core <6>[ 12.846969] intel_rapl_common: Found RAPL domain uncore <6>[ 12.846972] intel_rapl_common: Found RAPL domain psys <6>[ 12.858183] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 12.860165] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.860197] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.871204] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.876635] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.881995] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.883580] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 12.916528] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.920118] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.921797] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.922206] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.924738] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.926244] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.927157] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.927739] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.928131] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.929988] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.933047] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.935499] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.936375] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.938248] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.939320] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.941720] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.942171] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.944834] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.944852] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.946398] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.948128] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.952042] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.005040] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.009046] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.012261] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.015390] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.020412] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.023476] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.029276] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.033855] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.036503] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.040522] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.044812] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.048563] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.054107] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.058511] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.062450] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.066108] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.071446] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.075646] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.082359] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.087816] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.095754] r8152 4-1:1.0 enxe2015072f451: renamed from eth1 <4>[ 13.203695] block nvme0n1: No UUID available providing old NGUID <6>[ 13.296114] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 13.335740] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.522793] loop0: detected capacity change from 0 to 8 <6>[ 13.717454] Consider using thermal netlink events interface <6>[ 15.587836] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 21.803369] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 23.674832] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.676855] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 26.294060] systemd-journald[308]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 46.761264] [IGT] i915_module_load: executing <4>[ 46.761314] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 46.793720] [IGT] i915_module_load: starting subtest load <4>[ 47.363724] ********************************************************** <4>[ 47.363725] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 47.363726] ** ** <4>[ 47.363727] ** trace_printk() being used. Allocating extra memory. ** <4>[ 47.363727] ** ** <4>[ 47.363728] ** This means that this is a DEBUG kernel and it is ** <4>[ 47.363729] ** unsafe for production use. ** <4>[ 47.363729] ** ** <4>[ 47.363730] ** If you see this message and you are not debugging ** <4>[ 47.363731] ** the kernel, report this immediately to your vendor! ** <4>[ 47.363731] ** ** <4>[ 47.363732] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 47.363733] ********************************************************** <5>[ 47.394030] Setting dangerous option force_probe - tainting kernel <6>[ 47.398809] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 47.399897] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 47.400182] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 47.400366] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 47.400542] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 47.400765] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 47.400947] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 47.401153] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 47.401407] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 47.401659] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 47.401857] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 47.402363] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 47.402532] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 47.402988] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 47.403145] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 47.403565] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 47.403831] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 47.403972] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 47.404119] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 47.404254] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 47.404574] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 47.404921] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 47.404929] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 47.405117] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 47.405653] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 47.405937] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1998fff], io: n/a <7>[ 47.406081] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 47.406448] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 47.406641] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 47.406806] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 47.406963] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 47.407121] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 47.407272] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 47.407440] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 47.407596] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 47.407767] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 47.407933] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 47.408112] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 47.408278] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 47.408457] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 47.408630] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 47.408801] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 47.408963] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 47.409132] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.409291] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.409449] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.409606] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 47.409761] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.409917] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.410071] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.410244] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 47.410393] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.410545] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.410699] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.410852] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 47.411007] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.411169] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.411324] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.411481] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 47.411639] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.411794] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.411950] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.412107] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 47.412262] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 47.412418] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 47.412574] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 47.413287] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 47.413534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 47.413701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 47.413861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 47.414020] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 47.414185] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 47.414344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 47.414500] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 47.414653] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 47.414819] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 47.414972] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 47.415133] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 47.415290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 47.415442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 47.415599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 47.415750] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 47.415901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 47.416052] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 47.416219] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 47.416374] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 47.416528] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 47.416682] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 47.416834] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 47.416988] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 47.417153] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 47.417308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 47.417461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 47.417613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 47.417764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 47.417918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 47.418076] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 47.418274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 47.418493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 47.418691] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 47.418920] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 47.419186] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 47.419375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 47.419536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 47.419697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 47.419907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 47.420082] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 47.420103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 47.420285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 47.420451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 47.420617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 47.421229] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 47.422050] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 47.422961] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 47.423142] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 47.423322] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 47.423478] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 47.423634] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 47.423788] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 47.423936] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 47.424094] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 47.424246] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 47.424397] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 47.424548] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 47.424699] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 47.424849] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 47.428371] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 47.428547] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 47.428715] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 47.428875] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 47.429033] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 47.429307] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 47.429481] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 47.429642] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 47.429802] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 47.429958] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 47.430127] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 47.430285] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 47.430441] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 47.430597] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 47.430751] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 47.430941] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 47.431171] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 47.431338] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 47.431507] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 47.431677] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 47.431670] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 47.431832] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 47.431987] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 47.432151] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 47.432308] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 47.432474] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 47.432642] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 47.432821] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 47.432983] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 47.433162] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 47.433394] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 47.433622] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 47.433798] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 47.433985] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 47.434171] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 47.434353] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 47.434529] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 47.434704] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 47.434880] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 47.434918] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 47.435121] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 47.435314] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 47.438960] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:261:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 47.440784] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:261:DDI A/PHY A] <7>[ 47.441015] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 47.441197] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 47.441362] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 47.441530] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 47.441689] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 47.441845] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 47.441999] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 47.442160] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 47.442312] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 47.442495] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:261:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 47.442889] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 47.443044] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 47.443205] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 47.443374] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 47.443547] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <6>[ 47.444049] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 47.443990] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 47.444330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 47.445857] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD on <7>[ 47.446147] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 47.447598] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 47.448069] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 47.448669] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 47.449426] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 47.449910] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 47.451488] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 47.458293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 47.458303] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 47.458309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 47.458358] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:262:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 47.458836] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:262:eDP-1] Performing OUI wait (0 ms) <7>[ 47.459332] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:262:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 47.459515] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:262:eDP-1] DRRS type: none <7>[ 47.459764] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:262:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 47.459965] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:262:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 47.460232] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 47.460410] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 47.460584] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 47.460751] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 47.460898] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 47.461174] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 47.461498] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:270:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 47.461713] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:270:DDI B/PHY B] <7>[ 47.462167] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:270:DDI B/PHY B] <7>[ 47.462320] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:270:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 47.462703] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:288:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 47.462980] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 47.463259] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:288:DDI TC1/PHY TC1] <7>[ 47.463645] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:297:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 47.463886] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 47.464248] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 47.464455] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:297:DDI TC2/PHY TC2] <7>[ 47.464628] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:297:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 47.464854] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:301:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 47.465084] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 47.465342] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:301:DDI TC3/PHY TC3] <7>[ 47.465687] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:310:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 47.465918] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 47.466161] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:310:DDI TC4/PHY TC4] <7>[ 47.467140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 47.467510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 47.467846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 47.468166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:259:pipe D] hw state readout: disabled <7>[ 47.468347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 47.468548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 47.468741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 47.468900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 47.469058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 47.469228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 47.469387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 47.469551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 47.469713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 47.469874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 47.470031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 47.470194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 47.470351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 47.470513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 47.470671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 47.470830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 47.470987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 47.471150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 47.471323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:204:plane 1D] hw state readout: disabled, pipe D <7>[ 47.471514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 2D] hw state readout: disabled, pipe D <7>[ 47.471690] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 3D] hw state readout: disabled, pipe D <7>[ 47.471846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:234:plane 4D] hw state readout: disabled, pipe D <7>[ 47.472001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:244:plane 5D] hw state readout: disabled, pipe D <7>[ 47.472163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:254:cursor D] hw state readout: disabled, pipe D <7>[ 47.473071] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 47.473296] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:261:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 47.473479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 47.473645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST A] hw state readout: disabled, pipe A <7>[ 47.473803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:273:DP-MST B] hw state readout: disabled, pipe B <7>[ 47.473951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:274:DP-MST C] hw state readout: disabled, pipe C <7>[ 47.474108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DP-MST D] hw state readout: disabled, pipe D <7>[ 47.474337] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 47.474513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 47.474668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:290:DP-MST A] hw state readout: disabled, pipe A <7>[ 47.474816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST B] hw state readout: disabled, pipe B <7>[ 47.474962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST C] hw state readout: disabled, pipe C <7>[ 47.475183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST D] hw state readout: disabled, pipe D <7>[ 47.475378] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 47.475533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:297:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 47.475699] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 47.475850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:301:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 47.475999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:303:DP-MST A] hw state readout: disabled, pipe A <7>[ 47.476151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:304:DP-MST B] hw state readout: disabled, pipe B <7>[ 47.476299] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:305:DP-MST C] hw state readout: disabled, pipe C <7>[ 47.476446] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:306:DP-MST D] hw state readout: disabled, pipe D <7>[ 47.476606] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 47.476756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:310:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 47.476903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:312:DP-MST A] hw state readout: disabled, pipe A <7>[ 47.477051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:313:DP-MST B] hw state readout: disabled, pipe B <7>[ 47.477216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:314:DP-MST C] hw state readout: disabled, pipe C <7>[ 47.477364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:315:DP-MST D] hw state readout: disabled, pipe D <7>[ 47.478291] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0 <7>[ 47.478482] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 47.478672] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 47.478829] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 47.478992] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 47.479165] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 47.479323] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 47.479487] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 47.479770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:eDP-1] hw state readout: enabled <7>[ 47.479948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:271:DP-1] hw state readout: disabled <7>[ 47.480141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:283:HDMI-A-1] hw state readout: disabled <7>[ 47.480313] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:289:DP-2] hw state readout: disabled <7>[ 47.480479] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:298:HDMI-A-2] hw state readout: disabled <7>[ 47.480647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:302:DP-3] hw state readout: disabled <7>[ 47.480815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:311:DP-4] hw state readout: disabled <7>[ 47.481042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 47.481206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 47.481370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 47.481539] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 47.481694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 47.481841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 47.481988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] min_cdclk 256910 kHz <7>[ 47.482180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 47.482340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 47.482509] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 47.482662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 47.482808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 47.482954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 47.483157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] min_cdclk 0 kHz <7>[ 47.483323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 47.483487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 47.483641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 47.483785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 47.483934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 47.484080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 47.484245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:202:pipe C] min_cdclk 0 kHz <7>[ 47.484410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:204:plane 1D] min_cdclk 0 kHz <7>[ 47.484570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:214:plane 2D] min_cdclk 0 kHz <7>[ 47.484725] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 3D] min_cdclk 0 kHz <7>[ 47.484869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:234:plane 4D] min_cdclk 0 kHz <7>[ 47.485014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:244:plane 5D] min_cdclk 0 kHz <7>[ 47.485173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:254:cursor D] min_cdclk 0 kHz <7>[ 47.485318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:259:pipe D] min_cdclk 0 kHz <7>[ 47.485666] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 47.485830] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 47.485994] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 47.486157] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:259:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 47.486311] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 47.486499] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 47.486675] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 47.486836] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 47.487071] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 47.487426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 47.487590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 47.487749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 47.487906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 47.488062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 47.488239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 47.488396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 47.488550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 47.488703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 47.488855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 47.489007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 47.489165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 47.489321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 47.489475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 47.489629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 47.489781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 47.489933] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 47.490089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 47.490241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 47.490398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 47.490556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 47.490722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 47.490877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 47.491031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 47.491207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 47.491360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 47.491512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 47.491663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 47.491815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 47.491969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 47.492128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 47.492280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 47.492430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 47.492580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 47.492732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 47.492884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 47.493039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 47.493206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 47.493359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 47.493510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 47.493663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 47.493815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.493966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.494125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.494275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 47.494427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 47.494580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.494732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.494886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.495037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 47.495198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 47.495373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 47.495526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 47.495678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:259:pipe D] enable: no [setup_hw_state] <7>[ 47.495829] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 47.496203] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 47.496373] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 47.496546] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 47.497061] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 47.509269] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 47.515374] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 47.515543] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 47.515692] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 47.515841] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 47.515996] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 47.516165] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 47.516325] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 47.518848] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 47.519022] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 47.519203] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 47.520098] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 47.520266] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 47.520758] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 47.520919] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 47.522068] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 47.522300] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 47.522479] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 47.543058] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 47.543272] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 47.543433] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 47.543592] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 47.543749] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 47.543906] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 47.544061] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 47.544226] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 47.544377] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 47.544529] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 47.544679] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 47.544829] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 47.544980] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 47.545136] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 47.546075] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 47.556188] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1800MHz -> 2050MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 47.557101] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 47.558731] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 47.558733] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 47.559192] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 47.559487] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 47.560286] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 47.567580] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 47.567779] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 47.568776] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 47.568959] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 47.569642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 47.569806] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 47.570697] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 47.570865] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 47.571495] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 47.571653] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 47.573571] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 47.573779] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 47.573961] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 47.596712] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 47.596900] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 47.597062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 47.597240] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 47.597399] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 47.597552] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 47.597704] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 47.597853] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 47.598003] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 47.598320] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 47.598482] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 47.598631] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 47.598778] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 47.598924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 47.599074] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 47.601917] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 47.602118] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 47.602641] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 47.602644] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 47.616164] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 47.616450] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 47.625159] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 47.625328] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 47.626279] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 47.626287] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 47.626671] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 47.626952] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 47.628338] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDB5000 <7>[ 47.635144] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 47.635378] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 47.635592] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 47.635799] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 47.636004] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 47.636214] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 47.636413] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 47.639216] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 47.641245] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 47.641513] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 47.641759] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 47.641992] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 47.642230] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 47.642463] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 47.642691] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 47.642917] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 47.643150] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 47.643376] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 47.643603] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 47.643829] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 47.644052] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 47.644278] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 47.644503] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 47.644727] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 0: start 0x59008 <7>[ 47.644950] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 1: start 0x59108 <7>[ 47.645176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 2: start 0x59208 <7>[ 47.645400] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 3: start 0x59308 <7>[ 47.645623] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:259:pipe D] FQ 4: start 0x593c8 <7>[ 47.646258] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 47.646498] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 47.646752] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 47.646980] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 47.647226] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 47.647451] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 47.647673] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 47.647893] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 47.648441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 47.649038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 47.649654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:259:pipe D] enable: no [fastset] <7>[ 47.653367] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 47.653638] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 47.653959] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 47.654242] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 47.662982] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:145:pipe B] <7>[ 47.663515] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:202:pipe C] <7>[ 47.663989] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:259:pipe D] <7>[ 47.667974] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:eDP-1] adding connector to sysfs <7>[ 47.671277] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:262:eDP-1] backlight device intel_backlight registered <7>[ 47.671479] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:262:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 47.671666] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:262:eDP-1] Panel prepare <7>[ 47.672076] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 47.673764] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:eDP-1] generating connector hotplug event <7>[ 47.673891] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:271:DP-1] adding connector to sysfs <7>[ 47.674708] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 47.675738] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:271:DP-1] generating connector hotplug event <7>[ 47.675786] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:283:HDMI-A-1] adding connector to sysfs <7>[ 47.676224] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:283:HDMI-A-1] generating connector hotplug event <7>[ 47.676273] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:289:DP-2] adding connector to sysfs <7>[ 47.676686] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 47.677776] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:289:DP-2] generating connector hotplug event <7>[ 47.677828] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:298:HDMI-A-2] adding connector to sysfs <7>[ 47.678156] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:298:HDMI-A-2] generating connector hotplug event <7>[ 47.678192] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:302:DP-3] adding connector to sysfs <7>[ 47.678553] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 47.679246] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:302:DP-3] generating connector hotplug event <7>[ 47.679289] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:311:DP-4] adding connector to sysfs <7>[ 47.679700] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 47.680734] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:311:DP-4] generating connector hotplug event <6>[ 47.680775] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 47.683175] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 47.695223] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 47.698912] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 47.700531] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 47.700762] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 47.701982] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 47.702173] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:145:pipe B] not active, skipping <7>[ 47.702405] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:202:pipe C] not active, skipping <7>[ 47.702713] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 47.702719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 47.702646] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:259:pipe D] not active, skipping <7>[ 47.702864] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 47.703047] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:88:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 47.703226] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 47.703385] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:145:pipe B] not active, skipping <7>[ 47.703542] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:202:pipe C] not active, skipping <6>[ 47.703681] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 47.703707] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:259:pipe D] not active, skipping <7>[ 47.703871] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 47.704267] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 47.704470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 47.704328] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 47.706463] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 47.708815] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:271:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.708994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 47.709430] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 47.710016] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 47.710051] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 47.713375] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:283:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.713571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 47.714071] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 47.714355] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:289:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.714546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 47.714883] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 47.719208] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:298:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.719400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 47.719685] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 47.719924] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:302:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.720102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 47.720392] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 47.720648] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:311:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 47.720960] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 47.721074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 47.721097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 47.722655] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 47.723144] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 47.723335] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 47.723512] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 47.723848] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 47.723853] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 47.723859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 47.723964] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 47.724133] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 47.724291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 47.725319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] status updated from unknown to connected <7>[ 47.725569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 47.725575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 47.725579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 47.725583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 47.725989] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 47.729907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 47.729916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 47.729920] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 47.734338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 47.734346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 47.734351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 47.734897] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 47.734904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 47.734908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 47.739671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 47.739681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 47.739686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 47.740208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 47.740232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 47.740244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 47.740667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 47.740671] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 47.740674] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 47.740676] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 47.740678] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 47.740680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 47.740682] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 47.740684] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 47.740811] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 47.740830] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 47.740833] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 47.740842] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 47.741033] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 47.741053] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 47.741302] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 47.743492] fbcon: i915drmfb (fb0) is primary device <7>[ 47.744698] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:262:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 47.744931] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:261:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 47.745167] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 47.745359] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 47.745563] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:261:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 47.745756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 47.745954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state <7>[ 47.746185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 47.746405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 47.746585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 47.746764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 47.746940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 47.747130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 47.747331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 47.747522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 47.747701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 47.747885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 47.748061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 47.748246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 47.748439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 47.748625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 47.748792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 47.748954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 47.749130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 47.749302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 47.749470] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 47.749631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 47.749795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 47.749957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 47.750137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 47.750318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 47.750482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 47.750666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 47.750845] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 47.751019] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:88:pipe A] releasing DPLL 0 <7>[ 47.751476] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 47.751815] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 47.751985] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 47.752196] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 47.752371] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 47.752538] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.752710] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.752882] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.753045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 47.753218] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.753374] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.753542] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.753715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 47.753877] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.754045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.754228] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.754387] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 47.754546] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.754717] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.754877] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.755034] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 47.755191] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.755340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.755494] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 47.755675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 47.755859] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 47.756021] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 47.756187] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 47.756363] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 47.756575] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:88:pipe A] allocated DPLL 0 <7>[ 47.756758] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0 <7>[ 47.756934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 47.757105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 47.757269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 47.757450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 47.757625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 47.757794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 47.757950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 47.758187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 47.758354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 47.758530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 47.758707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 47.758882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 47.759070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 47.759256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 47.759423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 47.759593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 47.759761] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 47.759928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 47.760091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 47.760250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 47.760429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 47.760606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 47.760787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 47.760943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 47.761105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 47.761265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 47.761429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 47.761597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 47.761757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 47.761924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 47.762078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 47.762245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 47.762194] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 47.762413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 47.762492] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 47.762578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 47.762744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 47.762760] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 47.762900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 47.763055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 47.763018] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 47.763220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 47.763278] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 47.763382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 47.763548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 47.763532] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 47.763712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 47.763781] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 47.763875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 47.764026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 47.764029] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 47.764191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 47.764286] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 47.764359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 47.764528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 47.764533] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 47.764695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 47.764778] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 47.764850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 47.765002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.765022] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 47.765163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.765322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.765277] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 47.765496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 47.765540] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 47.765668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 47.765794] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 47.765837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.766001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.766042] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 47.766182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 47.766311] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 47.766359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 47.766534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 47.766570] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 47.766710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:320] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 47.766831] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 47.766887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 47.767064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 47.767146] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 47.767252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 47.767419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 47.767535] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 47.767611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 47.767817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 47.767809] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 47.767974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 47.767984] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 47.768180] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 47.768353] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 47.768539] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 47.768730] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 47.768916] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 47.769082] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 47.769269] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 47.769438] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 47.769609] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 47.769773] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 47.769930] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 47.770093] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 47.770296] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 47.774486] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 47.775247] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 47.776156] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 47.776813] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 47.777445] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 47.785292] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 47.805896] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 47.806256] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 47.981249] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:262:eDP-1] set backlight PWM = 0 <7>[ 47.982513] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 47.986360] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turn panel power off <7>[ 47.986347] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 47.986938] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 47.987006] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - short <7>[ 47.987324] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 48.037178] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 48.038045] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:88:pipe A] <7>[ 48.038313] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 48.039388] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 48.040024] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - long <7>[ 48.040040] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 48.040615] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 48.040733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 48.041275] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 48.041616] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 48.042071] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 48.042314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:261:DDI A/PHY A] <7>[ 48.042491] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DDI B/PHY B] <7>[ 48.042665] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST A] <7>[ 48.042829] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:273:DP-MST B] <7>[ 48.043012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DP-MST C] <7>[ 48.043230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DP-MST D] <7>[ 48.043467] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DDI TC1/PHY TC1] <7>[ 48.043654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:290:DP-MST A] <7>[ 48.043813] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST B] <7>[ 48.043970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST C] <7>[ 48.044140] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST D] <7>[ 48.044298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:297:DDI TC2/PHY TC2] <7>[ 48.044452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:301:DDI TC3/PHY TC3] <7>[ 48.044596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:303:DP-MST A] <7>[ 48.044738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:304:DP-MST B] <7>[ 48.044885] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:305:DP-MST C] <7>[ 48.045041] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:306:DP-MST D] <7>[ 48.045207] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:310:DDI TC4/PHY TC4] <7>[ 48.045361] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:312:DP-MST A] <7>[ 48.045507] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:313:DP-MST B] <7>[ 48.045659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:314:DP-MST C] <7>[ 48.045824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:315:DP-MST D] <7>[ 48.046072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 48.047118] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:88:pipe A] <7>[ 48.047335] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 48.049009] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turn panel power on <7>[ 48.049214] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 48.270877] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 48.541565] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 48.613243] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 48.614267] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 48.615017] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 48.646300] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 48.646983] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:261:DDI A/PHY A] - long <7>[ 48.647573] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 48.648182] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:261:DDI A/PHY A] <7>[ 48.759435] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 48.759476] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 48.759431] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 48.759436] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 48.820555] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 48.821742] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD on <7>[ 48.822444] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 48.829074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 48.830348] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 48.831166] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 48.832326] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 48.833102] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 48.834032] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 48.834200] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 48.835469] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 48.835615] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:262:eDP-1][ENCODER:261:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 48.836266] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 48.836561] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 48.836724] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 48.836952] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:262:eDP-1] set backlight PWM = 192000 <7>[ 48.847743] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 48.849531] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:262:eDP-1] <7>[ 48.849794] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A] <7>[ 48.851315] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 48.852702] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 48.853554] Console: switching to colour frame buffer device 180x56 <7>[ 48.853238] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 48.853946] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:262:eDP-1] set backlight level = 13892 <6>[ 48.882586] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 48.882657] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 48.882670] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 48.882608] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 48.882857] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 48.883065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 48.883052] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 48.883177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 48.883311] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 48.883517] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 48.883686] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 48.883903] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 48.884125] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 48.884329] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 48.884474] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 48.884544] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 48.884785] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 48.884954] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 48.885013] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 48.885192] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 48.885255] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 48.885418] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 48.885485] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 48.885644] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 48.885807] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 48.885813] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 48.885822] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 48.885848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 48.885862] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 48.886076] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 48.886100] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 48.886323] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 48.886331] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 48.886554] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 48.886813] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 48.887020] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 48.887254] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 48.887681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 48.887703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 48.887707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 48.887711] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 48.888563] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 48.889345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 48.889788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 48.890019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 48.890361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 48.890505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 48.890645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 48.890785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 48.890917] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 48.891060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 48.891313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 48.891439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 48.891564] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 48.891688] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 48.891813] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 48.891958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 48.891963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 48.891936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 48.891966] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 48.892060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 48.892208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 48.892334] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 48.892461] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 48.892590] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 48.892713] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 48.892836] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 48.892967] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 48.893098] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 48.893235] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 48.893358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 48.893503] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 48.893641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 48.893765] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 48.893889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 48.894013] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 48.894150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 48.894281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 48.894402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 48.894524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 48.894646] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 48.894768] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 48.894890] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 48.895021] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 48.895164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 48.895296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 48.895422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 48.895552] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 48.895676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 48.895799] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 48.895922] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 48.896043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 48.896251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 48.896256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 48.896203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 48.896260] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 48.896357] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 48.896486] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 48.896612] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 48.896641] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 48.896736] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 48.896899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 48.896903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 48.896860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 48.896906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 48.896985] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 48.897153] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 48.897277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 48.897294] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 48.897398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 48.897521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 48.897644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 48.897773] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 48.897897] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 48.898019] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 48.898173] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 48.898307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 48.898430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 48.898552] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 48.898673] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 48.898793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 48.898928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 48.899084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 48.899238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 48.899367] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 48.899488] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 48.899488] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 48.899489] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 48.901588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 48.901593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 48.901596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 48.901871] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 48.902131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 48.902136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 48.902139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 48.902411] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 48.902631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 48.902634] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 48.902636] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 48.902638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 48.902639] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 48.902641] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 48.902642] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 48.902644] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 48.902778] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 48.902796] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 48.902798] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 48.902819] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 48.915020] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 48.936708] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 48.936728] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 48.937401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] <7>[ 48.937422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:262:eDP-1] <7>[ 48.938862] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 48.939762] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 48.940173] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 48.940375] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 48.940663] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 48.940668] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD monitor <7>[ 48.940676] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:262:eDP-1] ELD size 20, SAD count 0 <7>[ 48.940759] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] VRR capable: no <7>[ 48.940960] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 48.941181] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:262:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 48.942053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:262:eDP-1] probed modes: <7>[ 48.942059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 48.942063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] <7>[ 48.942065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:271:DP-1] <7>[ 48.946318] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:271:DP-1] disconnected <7>[ 48.946323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] <7>[ 48.946325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:283:HDMI-A-1] <7>[ 48.950580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:283:HDMI-A-1] disconnected <7>[ 48.950584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] <7>[ 48.950586] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:289:DP-2] <7>[ 48.950931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:289:DP-2] disconnected <7>[ 48.950934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] <7>[ 48.950936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:298:HDMI-A-2] <7>[ 48.955249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:298:HDMI-A-2] disconnected <7>[ 48.955253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] <7>[ 48.955255] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:302:DP-3] <7>[ 48.955526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:DP-3] disconnected <7>[ 48.955529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] <7>[ 48.955531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:311:DP-4] <7>[ 48.955799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:311:DP-4] disconnected <7>[ 48.955801] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] enabled? yes <7>[ 48.955803] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:271:DP-1] enabled? no <7>[ 48.955805] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:283:HDMI-A-1] enabled? no <7>[ 48.955807] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:289:DP-2] enabled? no <7>[ 48.955808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:298:HDMI-A-2] enabled? no <7>[ 48.955809] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:DP-3] enabled? no <7>[ 48.955811] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:311:DP-4] enabled? no <7>[ 48.955899] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 48.955918] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:eDP-1] found preferred mode: 2880x1800 <7>[ 48.955920] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 48.955944] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 48.959081] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 48.973950] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 48.981359] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 49.003728] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 49.003813] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 49.005800] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 49.025564] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 49.025647] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 49.025912] [IGT] i915_module_load: exiting, ret=0 <7>[ 49.032327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 49.973436] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 49.973576] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 49.973751] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 49.973822] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.442471] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 turning VDD off <7>[ 51.443421] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:261:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 51.443956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 51.444855] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 51.445323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02