Results for igt@kms_pm_dc@dc5-retention-flops

Result: Skip

integration-manifest git-log-oneline i915_display_info8 igt_runner8 runtimes8 results8.json results8-i915-load.json i915_display_info_post_exec8 boot8 dmesg8

DetailValue
Duration 0.00 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.2-geb100acf0 (x86_64) (Linux: 6.18.0-rc5-CI_DRM_17544-g9d61bbd3042d+ x86_64)
Out 
Using IGT_SRANDOM=1763098747 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc5-retention-flops
Test requirement not met in function __igt_unique____real_main733, file ../tests/intel/kms_pm_dc.c:806:
Test requirement: intel_display_ver(data.devid) >= 30
Test not supported on this platform.
Subtest dc5-retention-flops: SKIP (0.000s)
Err 
Starting subtest: dc5-retention-flops
Subtest dc5-retention-flops: SKIP (0.000s)
Dmesg
<7> [310.065364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [310.089878] [IGT] kms_pm_dc: executing
<7> [310.104717] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [310.105617] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [310.105973] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [311.111248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.117729] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.119059] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.119596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.119891] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.120031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.120546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.145858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.146550] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.147238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.147962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.148717] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.149471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.150189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.150973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.151759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.153073] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.153214] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.153823] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.154546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.154698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.164528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.165934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.166088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.170693] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.175591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.181627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.186536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.186755] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.190188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.190630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [311.190637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.191546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.191997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.192298] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.192470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.192643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.216651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.216877] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.217225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.217656] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.218086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.218538] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.218952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.219374] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.219763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.220908] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.221343] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.222266] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.223276] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.223471] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.233301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.233440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.238239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [311.238434] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.243134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.247990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.252841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.258924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.259102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [311.259093] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.259107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.262601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.263982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.264377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.264701] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.264849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.265025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.288458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.288680] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.289117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.289633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.290148] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.290689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.291191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.291726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.292265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.293400] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.293892] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.294967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.297071] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.297682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.305503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.305697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.310424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [311.310516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.315338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.320231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.325050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.329945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.330097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.330163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [311.330169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.333560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.334958] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.335194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.335539] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.335686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.335863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.359463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.359738] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.360177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.360700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.361267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.361901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.362478] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.363039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.363601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.364238] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.364855] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.365587] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.367750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.368379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.377441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.377638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.382402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [311.382501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.387309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.392210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.397014] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.401912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.402072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.402144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [311.402149] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.405563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.406917] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.407176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.407502] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.407643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.407815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.431462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.431717] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.432160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.432710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.433330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.433921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.434502] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.435065] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.435625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.436265] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.436883] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.437618] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.439790] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.440428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.449516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.449710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.454452] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [311.454495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.459366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.464263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.469080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.473975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.474127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.474202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [311.474208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.478784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.480178] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.480485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.480765] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.480903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.481072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.504455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.504705] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.505175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.505733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.506280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.506871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.507417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.507977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.508605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.509220] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.509781] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.510469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.512662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.513278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.522676] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.522863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.527570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [311.527599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [311.527604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.533610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [311.533673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.538558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.543411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.548307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.553256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [311.553198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.553261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.553359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [311.556809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.558172] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.558417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.558701] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.558842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.559015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [311.582398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [311.582612] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [311.583060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [311.583594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [311.584125] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.584675] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.585176] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.585700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [311.586247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [311.586898] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [311.587443] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [311.588104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [311.590280] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [311.590935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [311.604907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [311.605016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [311.609890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [311.609909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [311.609929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.614736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [311.614799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [311.619642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [311.624507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [311.629408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [311.634256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [311.634475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<6> [311.635464] [IGT] kms_pm_dc: starting subtest dc5-retention-flops
<6> [311.635864] [IGT] kms_pm_dc: finished subtest dc5-retention-flops, SKIP
<6> [311.636330] [IGT] kms_pm_dc: exiting, ret=77
<7> [311.637203] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [311.637847] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [311.637877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [311.639225] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [311.639495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [311.639799] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [311.639950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [311.640131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
Created at 2025-11-14 06:35:15