igt@i915_pm_rpm@system-suspend-execbuf on shard-rkl@CI_DRM

Detail	Value
Duration	unknown
Hostname	shard-rkl-4
Igt-Version	IGT-Version: 2.2-g582f38e23 (x86_64) (Linux: 6.18.0-rc5-CI_DRM_17530-gf2a06cc6e63a+ x86_64)
Out	Using IGT_SRANDOM=1762931845 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888134a717f8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x282/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x760 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e5/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: system-suspend-execbuf [cmd] rtcwake: assuming RTC uses UTC ... [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Wed Nov 12 07:17:43 2025 Subtest system-suspend-execbuf: SUCCESS (80.550s) This test caused an abort condition: Ping host did not respond to ping, network down
Err	Starting subtest: system-suspend-execbuf Subtest system-suspend-execbuf: SUCCESS (80.550s)
Dmesg	<6> [60.700127] Console: switching to colour dummy device 80x25 <6> [60.700189] [IGT] i915_pm_rpm: executing <7> [60.704668] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [60.705262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] <7> [60.705277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [60.734165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [60.734177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [60.734180] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [60.734185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [60.736424] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [60.738798] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [60.742439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [60.742590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [60.743081] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [60.743088] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [60.743093] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [60.743100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] probed modes: <7> [60.743106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [60.743109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [60.743111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [60.743114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [60.743116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [60.743119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [60.743121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [60.743124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [60.743126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [60.743129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [60.743132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [60.743134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [60.743137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [60.743139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [60.743142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [60.743144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.743147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.743149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.743152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [60.743154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [60.743157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [60.743159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [60.743162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [60.743164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [60.743167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [60.743169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [60.743172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [60.743175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.743177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.743180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.743182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [60.743300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] <7> [60.743304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [60.747582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected <7> [60.747619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] <7> [60.747623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [60.751918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected <7> [60.751951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] <7> [60.751954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [60.756240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected <7> [60.759206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] <7> [60.759214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [60.763509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected <7> [60.763770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] <7> [60.763773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [60.768063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected <7> [60.768345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] <7> [60.768349] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [60.772653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected <7> [60.772915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] <7> [60.772918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [60.801032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [60.801040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [60.801043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [60.801046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [60.803240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [60.805533] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [60.809152] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [60.809283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [60.809764] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [60.809771] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [60.809776] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [60.809782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] probed modes: <7> [60.809785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [60.809788] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [60.809790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [60.809793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [60.809795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [60.809798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [60.809800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [60.809803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [60.809805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [60.809808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [60.809811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [60.809813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [60.809816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [60.809818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [60.809821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [60.809823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.809826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.809828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [60.809831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [60.809833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [60.809836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [60.809838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [60.809841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [60.809843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [60.809846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [60.809849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [60.809851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [60.809854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.809856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.809859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [60.809861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [60.809886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] <7> [60.809889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [60.814215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected <7> [60.814228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] <7> [60.814230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [60.818539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected <7> [60.818551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] <7> [60.818553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [60.822849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected <7> [60.823065] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:175] <7> [61.882751] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:88:pipe A] <7> [61.883697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [61.884520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [61.885273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [61.885564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [61.885704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [61.885844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [61.886014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [61.886168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [61.886305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [61.886442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [61.886578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [61.886711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [61.886846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [61.886990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [61.887124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [61.887257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [61.887390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [61.887523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [61.887659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [61.887794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [61.887936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [61.888070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [61.888204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [61.888336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [61.888469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [61.888600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [61.888733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [61.888865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [61.889008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [61.889141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [61.889273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [61.889405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [61.889538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [61.889671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [61.889803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [61.889945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [61.890106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [61.890239] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7> [61.890372] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:88:pipe A] releasing DPLL 0 <7> [61.890528] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [61.890664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [61.890817] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [61.890965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [61.891098] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [61.891232] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [61.891384] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [61.891552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [61.891705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:88:pipe A] data rate 0 num active planes 0 <7> [61.891848] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [61.892016] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:88:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [61.892183] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [61.892327] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [61.892461] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz <7> [61.892614] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [61.892753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [modeset] <7> [61.892893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [61.893052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [61.893187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [61.893321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [61.893456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [61.893589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [61.893820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [61.894022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [61.913405] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [61.932883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [61.934052] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output <7> [61.939535] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:88:pipe A] <7> [61.940427] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [61.941074] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [61.941678] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [61.942549] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B] <7> [61.943193] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C] <7> [61.943745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D] <7> [61.944219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A] <7> [61.944654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B] <7> [61.945118] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1] <7> [61.945809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [61.946408] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A] <7> [61.948763] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:145:pipe B] <7> [62.051837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [62.052925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.053571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.055392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [62.057397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [62.061009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.062325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [62.062675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [62.062975] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [62.063119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [62.063329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [62.155163] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf <7> [62.156640] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:88:pipe A] <7> [62.168668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [62.169065] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [62.169783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [62.170549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [62.171352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.172128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.172889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.173691] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.174375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [62.175725] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [62.176362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [62.177664] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [62.179898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.180532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.193320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [62.193511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [62.193737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [62.194541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.196179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [62.196732] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:145:pipe B] <7> [62.214288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [62.214711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.214902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.233422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [62.233432] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [62.233435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [62.233438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [62.238695] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [62.244003] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [62.253021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [62.253162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [62.253319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [62.259212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [62.265302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [62.271433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [62.271595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [62.271755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [62.272600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.291737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [62.291974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.292174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.293535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [62.293831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [62.299623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.301101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [62.302064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [62.302672] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [62.303059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [62.303467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [62.496052] PM: suspend entry (s2idle) <6> [62.501155] Filesystems sync: 0.004 seconds <6> [62.509441] Freezing user space processes <6> [62.511811] Freezing user space processes completed (elapsed 0.002 seconds) <6> [62.511870] OOM killer disabled. <6> [62.511874] Freezing remaining freezable tasks <6> [62.513146] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) <7> [62.624331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [62.625166] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [62.625944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [62.626706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [62.627595] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.628448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.629273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.630086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [62.630893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [62.631900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [62.632530] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [62.633945] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [62.636292] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.636871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.651145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [62.651269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [62.651417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [62.678516] GFP mask restricted <6> [62.695753] e1000e: EEE TX LPI TIMER: 00000000 <6> [62.697254] e1000e: EEE TX LPI TIMER: 00000011 <7> [62.712946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [62.712958] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [62.712961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [62.712965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [62.720659] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [62.728449] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [62.738516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [62.739749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [62.739895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [62.745797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [62.750708] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [62.755576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <3> [62.769335] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [62.772386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [62.772629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [62.773526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.775035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [62.775683] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [62.780283] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [62.780299] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [62.788160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [62.788383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [62.788543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.788685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.791267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [62.792505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [62.792673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [62.793588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.795072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [62.795281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [62.795541] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0 <7> [62.797190] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [62.923702] PM: suspend of devices complete after 241.262 msecs <7> [62.923720] PM: start suspend of devices complete after 403.881 msecs <7> [62.946087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [62.947191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [62.947848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [62.948541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [62.949198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [62.950966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [62.952278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [62.953769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [62.954567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [62.955391] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [62.956039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [62.957796] PM: late suspend of devices complete after 33.566 msecs <6> [62.975568] ACPI: EC: interrupt blocked <7> [63.207345] PM: Triggering wakeup from IRQ 9 <7> [63.209527] PM: noirq suspend of devices complete after 245.868 msecs <6> [63.209576] ACPI: \_SB_.PR00: LPI: Device not power manageable <6> [63.209596] ACPI: \_SB_.PR01: LPI: Device not power manageable <6> [63.209602] ACPI: \_SB_.PR02: LPI: Device not power manageable <6> [63.209608] ACPI: \_SB_.PR03: LPI: Device not power manageable <6> [63.209613] ACPI: \_SB_.PR04: LPI: Device not power manageable <6> [63.209622] ACPI: \_SB_.PR05: LPI: Device not power manageable <6> [63.209628] ACPI: \_SB_.PR06: LPI: Device not power manageable <6> [63.209634] ACPI: \_SB_.PR07: LPI: Device not power manageable <6> [63.209640] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable <6> [63.209651] ACPI: \_SB_.PR08: LPI: Device not power manageable <6> [63.209657] ACPI: \_SB_.PR09: LPI: Device not power manageable <6> [63.209663] ACPI: \_SB_.PR10: LPI: Device not power manageable <6> [63.209668] ACPI: \_SB_.PR11: LPI: Device not power manageable <6> [63.209674] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable <6> [63.209680] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable <6> [63.213056] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off <6> [63.355449] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry <7> [63.355455] PM: suspend-to-idle <7> [63.355720] ACPI: EC: ACPI EC GPE status set <7> [63.355783] ACPI: PM: Rearming ACPI SCI for wakeup <7> [77.875363] Timekeeping suspended for 14.584 seconds <7> [77.877825] PM: Triggering wakeup from IRQ 9 <7> [77.878028] ACPI: PM: ACPI fixed event wakeup <7> [77.878039] PM: resume from suspend-to-idle <6> [78.029876] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit <6> [78.033322] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on <6> [78.034568] ACPI: EC: interrupt unblocked <6> [79.441188] pcieport 0000:00:01.0: broken device, retraining non-functional downstream link at 2.5GT/s <6> [80.657016] pcieport 0000:00:01.0: broken device, retraining non-functional downstream link at 2.5GT/s <6> [81.755680] e1000e 0000:01:00.0: not ready 1023ms after resume; waiting <6> [82.852970] e1000e 0000:01:00.0: not ready 2047ms after resume; waiting <6> [84.979824] e1000e 0000:01:00.0: not ready 4095ms after resume; waiting <6> [89.544434] e1000e 0000:01:00.0: not ready 8191ms after resume; waiting <6> [98.264978] e1000e 0000:01:00.0: not ready 16383ms after resume; waiting <6> [115.168071] e1000e 0000:01:00.0: not ready 32767ms after resume; waiting <4> [151.008802] e1000e 0000:01:00.0: not ready 65535ms after resume; giving up <7> [151.078642] PM: noirq resume of devices complete after 72933.013 msecs <7> [151.104440] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08 <7> [151.104842] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [151.105143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [151.105480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [151.105856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.106215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.106552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.106916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.107232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [151.107760] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [151.107959] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [151.108691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [151.109394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.109534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [151.109699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [151.109999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [151.110158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [151.110435] PM: early resume of devices complete after 6.866 msecs <7> [151.115430] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [151.115602] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [151.116087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] hw state readout: disabled <7> [151.116344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] hw state readout: disabled <7> [151.116510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [151.116694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [151.116879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7> [151.117073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7> [151.117252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7> [151.117435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7> [151.117626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7> [151.117820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7> [151.118004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7> [151.118183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7> [151.118360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7> [151.118538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7> [151.118727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI B/PHY B] hw state readout: disabled, pipe A <7> [151.118905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:157:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [151.119082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:161:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [151.119242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST A] hw state readout: disabled, pipe A <7> [151.119401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:164:DP-MST B] hw state readout: disabled, pipe B <7> [151.119579] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [151.119802] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [151.120033] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [151.120412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:HDMI-A-1] hw state readout: disabled <7> [151.120671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:158:HDMI-A-2] hw state readout: disabled <7> [151.120877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:162:DP-1] hw state readout: disabled <7> [151.121049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:169:HDMI-A-3] hw state readout: disabled <7> [151.121194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [151.121338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [151.121480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7> [151.121626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7> [151.121767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7> [151.121909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz <7> [151.122050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] min_cdclk 0 kHz <7> [151.122191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7> [151.122333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7> [151.122473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7> [151.122620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7> [151.122762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7> [151.122902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] min_cdclk 0 kHz <7> [151.123043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] min_cdclk 0 kHz <7> [151.123190] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [151.123336] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [151.123479] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [151.123633] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [151.123886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [setup_hw_state] <7> [151.124034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7> [151.124282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state <7> [151.124435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [151.124584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [151.124759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [151.124899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [151.125039] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7> [151.125215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [151.125358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [modeset] <7> [151.125497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [151.125659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [151.125812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [151.125948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [151.126084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [151.126220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [151.126356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [fastset] <7> [151.126492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:90:plane 1B] fb: [NOFB], visible: no <7> [151.126662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:100:plane 2B] fb: [NOFB], visible: no <7> [151.126811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:110:plane 3B] fb: [NOFB], visible: no <7> [151.126947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:120:plane 4B] fb: [NOFB], visible: no <7> [151.127081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:130:plane 5B] fb: [NOFB], visible: no <7> [151.127216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:140:cursor B] fb: [NOFB], visible: no <7> [151.127420] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B] <7> [151.127561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C] <7> [151.127773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D] <7> [151.127908] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A] <7> [151.128043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B] <7> [151.128177] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1] <7> [151.128342] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:158:HDMI-A-2] <7> [151.128500] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:162:DP-1] <7> [151.128688] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:169:HDMI-A-3] <7> [151.128914] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A] <7> [151.129153] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:145:pipe B] <7> [151.130944] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <7> [151.131135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <6> [151.131433] serial 00:02: activated <6> [151.132563] e1000e 0000:01:00.0 enp1s0: MAC Wakeup cause - Unicast Packet <7> [151.140410] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0 <7> [151.140419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [151.142274] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <6> [151.142870] nvme nvme0: 12/0/0 default/read/poll queues <7> [151.147261] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [151.147311] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [151.159886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [151.159896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [151.159900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [151.159903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [151.162231] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [151.164785] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [151.168620] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [151.168888] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [151.169029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [151.173229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [151.177419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [151.218193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [151.218597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [151.218924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.219173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.220595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <3> [151.353155] e1000e 0000:01:00.0 enp1s0: Timesync Tx Control register not set as expected <3> [151.353533] e1000e 0000:01:00.0 enp1s0: Failed to initialize MSI-X interrupts. Falling back to MSI interrupts. <3> [151.353539] e1000e 0000:01:00.0 enp1s0: Failed to initialize MSI interrupts. Falling back to legacy interrupts. <3> [151.360721] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <6> [151.424560] ata3: SATA link down (SStatus 4 SControl 300) <6> [151.425724] ata2: SATA link down (SStatus 4 SControl 300) <6> [151.425815] ata4: SATA link down (SStatus 4 SControl 300) <3> [151.824776] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <7> [152.452250] PM: resume of devices complete after 1341.809 msecs <7> [152.453244] GFP mask restored <6> [152.455908] OOM killer enabled. <6> [152.455911] Restarting tasks: Starting <7> [152.456936] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <7> [152.457202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [152.457331] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <6> [152.460542] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) <7> [152.462958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [152.463523] Restarting tasks: Done <5> [152.463684] random: crng reseeded on system resumption <6> [152.463932] PM: suspend exit <7> [152.464295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [152.464918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [152.465474] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [152.465637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [152.465826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [152.576896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [152.577303] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [152.578054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [152.579088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.580173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.581277] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.582340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.583413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.584457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.585964] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [152.586891] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.587888] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.590127] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.590764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.601045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [152.601207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.601373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [152.647238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [152.647249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [152.647252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [152.647255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [152.653382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [152.659348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [152.667058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [152.668381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [152.668596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [152.673247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [152.678115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [152.712954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.714229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [152.720040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [152.721477] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [152.721752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [152.722037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [152.722180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [152.722354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [152.816827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [152.817231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [152.817988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [152.818701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.819425] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.820186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.820918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.821659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.822340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.823223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [152.823369] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.823786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.824502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.824667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.830878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [152.830980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.831125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [152.878207] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [152.878218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [152.878222] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [152.878225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [152.883413] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [152.888627] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [152.896375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [152.896513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [152.897543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [152.902481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [152.907371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [152.936926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.937334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [152.943058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [152.944490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [152.945111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [152.945759] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [152.946371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [152.947028] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.047825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.048231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.048953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.049667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.050392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.051161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.051903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.052631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.053316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.054074] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.054713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.056175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.058499] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.059189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.069584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [153.069814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [153.070096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [153.113157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [153.113167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [153.113171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [153.113174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [153.117164] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [153.122401] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [153.128851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [153.128996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [153.129148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [153.134896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [153.139823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [153.193020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [153.193524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [153.199369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [153.200785] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [153.201024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [153.201308] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [153.201449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [153.201628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.283833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.284240] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.284963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.285938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.286863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.287932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.288998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.289668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.289955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.290289] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.290504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.290915] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.291710] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.291933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.300641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [153.300842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [153.301322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [153.344350] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [153.344361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [153.344364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [153.344368] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [153.348344] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [153.353605] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [153.360088] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [153.360295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [153.360499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [153.365148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [153.369976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [153.408940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [153.409315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [153.415243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [153.416715] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [153.417483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [153.418342] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [153.418994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [153.419694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.513822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.514221] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.514958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.515918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.516957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.518031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.519079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.520153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.521168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.522267] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.523226] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.524388] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.527030] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.528010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.538611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [153.538834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [153.539094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [153.587108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [153.587118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [153.587122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [153.587125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [153.592322] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [153.597548] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [153.604054] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [153.604263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [153.604484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [153.609090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [153.613972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [153.648909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [153.649441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [153.655308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [153.656737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [153.656972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [153.657256] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [153.657396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [153.657568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.752834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.753236] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.753966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.754677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.755404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.756174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.756915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.757695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.758449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.759212] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.759863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.760664] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.762938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.763557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.772720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [153.772961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [153.774103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [153.819680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [153.819691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [153.819694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [153.819697] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [153.823793] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [153.828995] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [153.835415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [153.835549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [153.835697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [153.840308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [153.845164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [153.928796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [153.929165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [153.936116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [153.937720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [153.938499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [153.939402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [153.940085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [153.940807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.986819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.987228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.987943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.988766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.989566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.990429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.991295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.992064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.992268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.992513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.992662] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.992978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.993689] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.993854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.001243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.001423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.002224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [154.049362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.049373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.049376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.049379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.052306] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.058237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.067133] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.067266] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.067407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [154.072058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [154.076946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [154.120880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.121366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.128598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.130207] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.131037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.131886] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.132511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.133231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.215800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.216208] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.216924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.217633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.218379] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.219224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.219971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.220707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.221412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.222275] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [154.222549] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.222877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.223570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.223732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.231142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.231303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.231978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [154.276292] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.276302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.276305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.276308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.282822] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.287017] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.294477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.294626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.295807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [154.300621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [154.305479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [154.344953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.345333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.352204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.353660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.353958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.354238] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.354377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.354546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.444826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.445228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.445963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.446941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.447750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.448713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.449569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.450410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.451072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.451318] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [154.451454] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.451770] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.452468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.452659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.463751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.463924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.464402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [154.510002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.510013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.510016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.510019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.515277] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.520597] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.527228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.527362] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.527503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [154.533327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [154.538200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [154.568966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.569357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.575054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.576483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.576768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.577050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.577206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.577379] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.676793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.677196] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.677921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.678604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.679423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.680240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.680980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.681711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.682387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.683153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [154.683810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.684676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.686921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.687534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.696697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.696936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.697664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [154.742414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.742425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.742428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.742431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.748821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.754047] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.761913] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.762065] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.762208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [154.766784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [154.771646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [154.809022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.809224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.817280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.818900] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.820369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.821237] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.821895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.822531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.910832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.911276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.912067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.912832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.913601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.914457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.915288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.916036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.916720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.916966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [154.917112] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.917370] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.918123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.918270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.925695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.925824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.926161] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [154.968951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.968962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.968965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.968968] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.973799] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.980144] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.986560] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.986731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.986872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [154.991489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [154.996350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [155.040842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.041331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.049506] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.051120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.051917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.052781] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.053411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.055420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.138818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.139227] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.139943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.140655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.141412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.142183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.142923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.143718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.144440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.145205] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.145949] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.146819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.149104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.149739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.160044] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.160270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.160586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [155.207510] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.207537] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.207541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.207544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.212783] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.219160] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.226836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.226988] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.227132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [155.231791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [155.236664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [155.272874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.273284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.279036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.280410] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.280651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.280935] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.281076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.281249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.374836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.375246] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.375963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.376679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.377414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.378264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.379024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.379815] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.380567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.381510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.382173] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.382972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.385209] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.385862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.396178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.396394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.396720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [155.444629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.444639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.444642] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.444645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.449937] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.456202] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.462674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.463969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.464119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [155.469955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [155.474890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [155.520911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.521198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.526874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.528462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.529297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.530189] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.530851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.531541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.609820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.610228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.610956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.611664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.612411] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.613260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.613994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.614762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.615497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.616258] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.616904] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.617667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.619858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.620468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.629626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.629832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.630487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [155.677247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.677258] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.677261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.677265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.682408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.688801] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.696547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.696709] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.696879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [155.701485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [155.706337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [155.737048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.737344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.743030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.744414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.744968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.745550] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.746007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.746485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.843670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.844079] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.844775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.845548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.846341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.847191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.847946] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.848749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.849427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.850216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.850496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.850794] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.851493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.851643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.860270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.860403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.860648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [155.906948] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.906959] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.906979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.906983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.914541] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.919765] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.926208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.926370] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.926509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [155.931131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [155.936020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [155.976991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.977422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.984456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.986144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.987011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.987856] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.988382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.988987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.073825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.074231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.074946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.075658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.076394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.077167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.077956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.078763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.079511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.080341] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [156.081064] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.081901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.084136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.084839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.095168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.095382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.095701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [156.145343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.145353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.145356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.145359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.150568] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.154563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.161005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.161138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.161277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [156.165893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [156.171945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [156.200997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.201271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.207010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.208413] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [156.208987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [156.209571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [156.210030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [156.210536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.308819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.309228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.309960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.310673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.311400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.312183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.313008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.313735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.314357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.314601] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [156.314754] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.315030] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.315719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.315857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.322049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.322150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.322289] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [156.367600] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.367614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.367618] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.367621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.371616] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.376774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.382942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.383078] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.383221] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [156.387872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [156.392725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [156.440866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.441710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.448898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.450515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [156.451344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [156.452249] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [156.452942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [156.453639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.535825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.536228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.536952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.537664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.538394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.539167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.539906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.540659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.541420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.542178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [156.542755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.543028] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.543734] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.543875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.551276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.551413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.551652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [156.597655] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.597666] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.597669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.597672] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.601657] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.608056] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.614453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.614585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.614779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [156.619353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [156.624243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [156.704934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.705720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.711653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.712987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [156.713233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [156.713561] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [156.713723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [156.713900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.764822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.765231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.765953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.766664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.767416] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.768260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.769070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.769876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.770647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.771440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [156.772169] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.773010] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.775303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.775952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.786304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.786502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.786810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [156.832480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.832490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.832494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.832497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.838914] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.844186] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.849488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.849628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.850618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [156.855513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [156.860402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [156.897007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.897437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.905653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.907415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [156.908292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [156.909335] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [156.910009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [156.910923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.001178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.001585] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [157.002329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [157.003048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.003796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.004633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.005415] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.006214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.006942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [157.007667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [157.008278] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [157.009090] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [157.011372] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.012033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.022383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.022660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.023026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <7> [157.067428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [157.067439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [157.067443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [157.067446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [157.073626] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [157.078920] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [157.086632] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [157.086782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [157.086925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [157.091501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <7> [157.097548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [157.128870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.129207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.133674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.135115] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [157.135709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [157.136326] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [157.136797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [157.137283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [157.224768] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS <7> [157.229287] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:148:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [157.230178] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [157.230826] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [157.231470] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:147:DDI B/PHY B] [CRTC:88:pipe A] <7> [157.232124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [157.232829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [157.233446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [157.234119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [157.234768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [157.235377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [157.236127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [157.236747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [157.236901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [157.237040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [157.237177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [157.237314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [157.237451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [157.237587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [157.237911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [157.238086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [157.238223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [157.238360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [157.238496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [157.238672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [157.238824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [157.238961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [157.239097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [157.239234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [157.239370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [157.239507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [157.239671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [157.239823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [157.239983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [157.240120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [157.240256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [157.240392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [157.240528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [157.240712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [157.240855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [157.240998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [157.241140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [157.241283] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7> [157.241460] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [157.241606] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [157.241774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [157.241910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [157.242045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [157.242181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [157.242316] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [157.242455] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [157.242640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:88:pipe A] data rate 559716 num active planes 1 <7> [157.242816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [157.242955] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [157.243112] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:88:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [157.243266] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [157.243405] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:88:pipe A] allocated DPLL 0 <7> [157.243547] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0 <7> [157.243720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [modeset] <7> [157.243860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [157.244000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [157.244138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [157.244276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [157.244414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [157.244553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [157.244701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [157.244840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [157.244977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [157.245114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [157.245257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [157.245398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [157.245538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [157.245686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [157.245848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [157.245986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [157.246123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [157.246260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [157.246396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [157.246532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [157.246697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [157.246848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [157.246984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [157.247120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [157.247256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [157.247390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.247526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.247669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.247805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [157.247940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [157.248073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.248208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.248342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [157.248475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [157.248620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [157.248756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:173] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [157.248891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [157.249025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [157.249181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [157.249317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [157.249451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [157.249586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [157.249782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [157.261867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.262017] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [157.262172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [157.262355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.262589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.262871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.263092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.263316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.263508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [157.264074] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [157.264236] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [157.264848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [157.265554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.265713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.275525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.275832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.276066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.276824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.278218] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B] <7> [157.278363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C] <7> [157.278505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D] <7> [157.278660] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A] <7> [157.278800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B] <7> [157.278980] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [157.279220] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:88:pipe A] <7> [157.279368] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [157.279699] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output <7> [157.284364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [157.284547] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [157.285527] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [157.285691] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [157.305131] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1] <7> [157.305495] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A] <7> [157.307067] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [157.307007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1] <6> [157.307202] [IGT] i915_pm_rpm: exiting, ret=0 <7> [157.323772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.324245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.324548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.335572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [157.335585] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [157.335588] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k <7> [157.335592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0 <7> [157.337853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [157.340163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [157.343809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [157.343941] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [157.344084] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2] <7> [157.349135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.349335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.362117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1] <6> [157.362269] Console: switching to colour frame buffer device 240x67 <7> [157.366394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3] <7> [157.397756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.398461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.399185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [60.705262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]

<7> [60.705277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [60.734165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [60.734177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [60.734180] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [60.734185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [60.736424] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [60.738798] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [60.742439] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [60.742590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [60.743081] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [60.743088] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [60.743093] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [60.743100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] probed modes:

<7> [60.743106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [60.743109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [60.743111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [60.743114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [60.743116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [60.743119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [60.743121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [60.743124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [60.743126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [60.743129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [60.743132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [60.743134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [60.743137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [60.743139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [60.743142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [60.743144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.743147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.743149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.743152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [60.743154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [60.743157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [60.743159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [60.743162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [60.743164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [60.743167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [60.743169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [60.743172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [60.743175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.743177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.743180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.743182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [60.743300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]

<7> [60.743304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [60.747582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected

<7> [60.747619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]

<7> [60.747623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [60.751918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected

<7> [60.751951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]

<7> [60.751954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [60.756240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected

<7> [60.759206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]

<7> [60.759214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [60.763509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected

<7> [60.763770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]

<7> [60.763773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [60.768063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected

<7> [60.768345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]

<7> [60.768349] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [60.772653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected

<7> [60.772915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]

<7> [60.772918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [60.801032] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [60.801040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [60.801043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [60.801046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [60.803240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [60.805533] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [60.809152] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [60.809283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [60.809764] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [60.809771] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [60.809776] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [60.809782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] probed modes:

<7> [60.809785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [60.809788] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [60.809790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [60.809793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [60.809795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [60.809798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [60.809800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [60.809803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [60.809805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [60.809808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [60.809811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [60.809813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [60.809816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [60.809818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [60.809821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [60.809823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.809826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.809828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [60.809831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [60.809833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [60.809836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [60.809838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [60.809841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [60.809843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [60.809846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [60.809849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [60.809851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [60.809854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.809856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.809859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [60.809861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [60.809886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]

<7> [60.809889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [60.814215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected

<7> [60.814228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]

<7> [60.814230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [60.818539] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected

<7> [60.818551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]

<7> [60.818553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [60.822849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected

<7> [61.882751] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:88:pipe A]

<7> [61.883697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [61.884520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [61.885273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [61.885564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [61.885704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [61.885844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [61.886014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [61.886168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [61.886305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [61.886442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [61.886578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [61.886711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [61.886846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [61.886990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [61.887124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [61.887257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [61.887390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [61.887523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [61.887659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [61.887794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [61.887936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [61.888070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [61.888204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [61.888336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [61.888469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [61.888600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [61.888733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [61.888865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [61.889008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [61.889141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [61.889273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [61.889405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [61.889538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [61.889671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [61.889803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [61.889945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [61.890106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [61.890239] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset

<7> [61.890372] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:88:pipe A] releasing DPLL 0

<7> [61.890528] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [61.890664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [61.890817] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [61.890965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [61.891098] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [61.891232] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [61.891384] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [61.891552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [61.891705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:88:pipe A] data rate 0 num active planes 0

<7> [61.891848] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [61.892016] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:88:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [61.892183] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [61.892327] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [61.892461] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz

<7> [61.892614] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [61.892753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [modeset]

<7> [61.892893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [61.893052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [61.893187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [61.893321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [61.893456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [61.893589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [61.893820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [61.894022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [61.913405] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [61.932883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [61.934052] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output

<7> [61.939535] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:88:pipe A]

<7> [61.940427] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [61.941074] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [61.941678] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [61.942549] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B]

<7> [61.943193] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C]

<7> [61.943745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D]

<7> [61.944219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A]

<7> [61.944654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B]

<7> [61.945118] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [61.945809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [61.946408] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A]

<7> [61.948763] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:145:pipe B]

<7> [62.051837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [62.052925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.053571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.055392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [62.057397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [62.061009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.062325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [62.062675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [62.062975] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [62.063119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [62.063329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [62.155163] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf

<7> [62.156640] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:88:pipe A]

<7> [62.168668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [62.169065] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [62.169783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [62.170549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [62.171352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.172128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.172889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.173691] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.174375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [62.175725] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [62.176362] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [62.177664] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [62.179898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.180532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.193320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [62.193511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [62.193737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [62.194541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.196179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [62.196732] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:145:pipe B]

<7> [62.214288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [62.214711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.214902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.233422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [62.233432] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [62.233435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [62.233438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [62.238695] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [62.244003] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [62.253021] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [62.253162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [62.253319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [62.259212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [62.265302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [62.271433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [62.271595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [62.271755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [62.272600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.291737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [62.291974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.292174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.293535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [62.293831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [62.299623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.301101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [62.302064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [62.302672] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [62.303059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [62.303467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [62.511811] Freezing user space processes completed (elapsed 0.002 seconds)

<6> [62.513146] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

<7> [62.624331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [62.625166] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [62.625944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [62.626706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [62.627595] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.628448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.629273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.630086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [62.630893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [62.631900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [62.632530] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [62.633945] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [62.636292] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.636871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.651145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [62.651269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [62.651417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [62.712946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [62.712958] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [62.712961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [62.712965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [62.720659] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [62.728449] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [62.738516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [62.739749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [62.739895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [62.745797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [62.750708] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [62.755576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [62.769335] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [62.772386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [62.772629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [62.773526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.775035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [62.775683] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [62.780283] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [62.780299] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [62.788160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [62.788383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [62.788543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.788685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.791267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [62.792505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [62.792673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [62.793588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.795072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [62.795281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [62.795541] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0

<7> [62.797190] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [62.923720] PM: start suspend of devices complete after 403.881 msecs

<7> [62.946087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [62.947191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [62.947848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [62.948541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [62.949198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [62.950966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [62.952278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [62.953769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [62.954567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [62.955391] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [62.956039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [62.957796] PM: late suspend of devices complete after 33.566 msecs

<7> [63.209527] PM: noirq suspend of devices complete after 245.868 msecs

<6> [63.209640] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable

<6> [63.209674] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable

<6> [63.209680] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable

<6> [63.213056] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off

<6> [63.355449] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry

<6> [78.029876] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit

<6> [78.033322] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on

<6> [79.441188] pcieport 0000:00:01.0: broken device, retraining non-functional downstream link at 2.5GT/s

<6> [80.657016] pcieport 0000:00:01.0: broken device, retraining non-functional downstream link at 2.5GT/s

<6> [81.755680] e1000e 0000:01:00.0: not ready 1023ms after resume; waiting

<6> [82.852970] e1000e 0000:01:00.0: not ready 2047ms after resume; waiting

<6> [84.979824] e1000e 0000:01:00.0: not ready 4095ms after resume; waiting

<6> [89.544434] e1000e 0000:01:00.0: not ready 8191ms after resume; waiting

<6> [98.264978] e1000e 0000:01:00.0: not ready 16383ms after resume; waiting

<6> [115.168071] e1000e 0000:01:00.0: not ready 32767ms after resume; waiting

<4> [151.008802] e1000e 0000:01:00.0: not ready 65535ms after resume; giving up

<7> [151.078642] PM: noirq resume of devices complete after 72933.013 msecs

<7> [151.104440] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08

<7> [151.104842] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [151.105143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [151.105480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [151.105856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.106215] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.106552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.106916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.107232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [151.107760] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [151.107959] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [151.108691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [151.109394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.109534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [151.109699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [151.109999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [151.110158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [151.110435] PM: early resume of devices complete after 6.866 msecs

<7> [151.115430] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [151.115602] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [151.116087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] hw state readout: disabled

<7> [151.116344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] hw state readout: disabled

<7> [151.116510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [151.116694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [151.116879] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A

<7> [151.117073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A

<7> [151.117252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A

<7> [151.117435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A

<7> [151.117626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B

<7> [151.117820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B

<7> [151.118004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B

<7> [151.118183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B

<7> [151.118360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B

<7> [151.118538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] hw state readout: disabled, pipe B

<7> [151.118727] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [151.118905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:157:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [151.119082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:161:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [151.119242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST A] hw state readout: disabled, pipe A

<7> [151.119401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:164:DP-MST B] hw state readout: disabled, pipe B

<7> [151.119579] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [151.119802] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [151.120033] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [151.120412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:HDMI-A-1] hw state readout: disabled

<7> [151.120671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:158:HDMI-A-2] hw state readout: disabled

<7> [151.120877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:162:DP-1] hw state readout: disabled

<7> [151.121049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:169:HDMI-A-3] hw state readout: disabled

<7> [151.121194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [151.121338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [151.121480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz

<7> [151.121626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz

<7> [151.121767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz

<7> [151.121909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz

<7> [151.122050] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:88:pipe A] min_cdclk 0 kHz

<7> [151.122191] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 1B] min_cdclk 0 kHz

<7> [151.122333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 2B] min_cdclk 0 kHz

<7> [151.122473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:110:plane 3B] min_cdclk 0 kHz

<7> [151.122620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 4B] min_cdclk 0 kHz

<7> [151.122762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:130:plane 5B] min_cdclk 0 kHz

<7> [151.122902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:140:cursor B] min_cdclk 0 kHz

<7> [151.123043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:145:pipe B] min_cdclk 0 kHz

<7> [151.123190] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:88:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [151.123336] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [151.123479] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [151.123633] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [151.123886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [setup_hw_state]

<7> [151.124034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [setup_hw_state]

<7> [151.124282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state

<7> [151.124435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [151.124584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [151.124759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [151.124899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [151.125039] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset

<7> [151.125215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [151.125358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: no [modeset]

<7> [151.125497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [151.125659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [151.125812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [151.125948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [151.126084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [151.126220] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [151.126356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:145:pipe B] enable: no [fastset]

<7> [151.126492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:90:plane 1B] fb: [NOFB], visible: no

<7> [151.126662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:100:plane 2B] fb: [NOFB], visible: no

<7> [151.126811] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:110:plane 3B] fb: [NOFB], visible: no

<7> [151.126947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:120:plane 4B] fb: [NOFB], visible: no

<7> [151.127081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:130:plane 5B] fb: [NOFB], visible: no

<7> [151.127216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:140:cursor B] fb: [NOFB], visible: no

<7> [151.127420] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B]

<7> [151.127561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C]

<7> [151.127773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D]

<7> [151.127908] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A]

<7> [151.128043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B]

<7> [151.128177] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [151.128342] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [151.128500] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:162:DP-1]

<7> [151.128688] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [151.128914] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A]

<7> [151.129153] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:145:pipe B]

<7> [151.130944] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<7> [151.131135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<6> [151.132563] e1000e 0000:01:00.0 enp1s0: MAC Wakeup cause - Unicast Packet

<7> [151.140410] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0

<7> [151.140419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [151.142274] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [151.147261] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [151.147311] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [151.159886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [151.159896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [151.159900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [151.159903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [151.162231] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [151.164785] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [151.168620] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [151.168888] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [151.169029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [151.173229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [151.177419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [151.218193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [151.218597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [151.218924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.219173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.220595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [151.353155] e1000e 0000:01:00.0 enp1s0: Timesync Tx Control register not set as expected

<3> [151.353533] e1000e 0000:01:00.0 enp1s0: Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.

<3> [151.353539] e1000e 0000:01:00.0 enp1s0: Failed to initialize MSI interrupts. Falling back to legacy interrupts.

<3> [151.360721] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<3> [151.824776] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [152.456936] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<7> [152.457202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [152.457331] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<6> [152.460542] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])

<7> [152.462958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.464295] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [152.464918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [152.465474] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [152.465637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [152.465826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [152.576896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [152.577303] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [152.578054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [152.579088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.580173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.581277] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.582340] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.583413] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.584457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.585964] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [152.586891] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.587888] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.590127] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.590764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.601045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [152.601207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.601373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [152.647238] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [152.647249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [152.647252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [152.647255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [152.653382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [152.659348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [152.667058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [152.668381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [152.668596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [152.673247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [152.678115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [152.712954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.714229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [152.720040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.721477] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [152.721752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [152.722037] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [152.722180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [152.722354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [152.816827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [152.817231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [152.817988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [152.818701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.819425] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.820186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.820918] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.821659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.822340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.823223] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [152.823369] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.823786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.824502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.824667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.830878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [152.830980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.831125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [152.878207] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [152.878218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [152.878222] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [152.878225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [152.883413] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [152.888627] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [152.896375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [152.896513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [152.897543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [152.902481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [152.907371] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [152.936926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.937334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [152.943058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.944490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [152.945111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [152.945759] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [152.946371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [152.947028] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.047825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.048231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.048953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.049667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.050392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.051161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.051903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.052631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.053316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.054074] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.054713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.056175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.058499] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.059189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.069584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [153.069814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [153.070096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [153.113157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [153.113167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [153.113171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [153.113174] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [153.117164] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [153.122401] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [153.128851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [153.128996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [153.129148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [153.134896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [153.139823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [153.193020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [153.193524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [153.199369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [153.200785] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [153.201024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [153.201308] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [153.201449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [153.201628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.283833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.284240] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.284963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.285938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.286863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.287932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.288998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.289668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.289955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.290289] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.290504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.290915] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.291710] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.291933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.300641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [153.300842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [153.301322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [153.344350] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [153.344361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [153.344364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [153.344368] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [153.348344] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [153.353605] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [153.360088] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [153.360295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [153.360499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [153.365148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [153.369976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [153.408940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [153.409315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [153.415243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [153.416715] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [153.417483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [153.418342] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [153.418994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [153.419694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.513822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.514221] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.514958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.515918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.516957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.518031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.519079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.520153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.521168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.522267] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.523226] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.524388] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.527030] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.528010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.538611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [153.538834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [153.539094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [153.587108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [153.587118] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [153.587122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [153.587125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [153.592322] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [153.597548] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [153.604054] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [153.604263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [153.604484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [153.609090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [153.613972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [153.648909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [153.649441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [153.655308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [153.656737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [153.656972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [153.657256] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [153.657396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [153.657568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.752834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.753236] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.753966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.754677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.755404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.756174] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.756915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.757695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.758449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.759212] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.759863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.760664] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.762938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.763557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.772720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [153.772961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [153.774103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [153.819680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [153.819691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [153.819694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [153.819697] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [153.823793] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [153.828995] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [153.835415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [153.835549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [153.835697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [153.840308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [153.845164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [153.928796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [153.929165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [153.936116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [153.937720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [153.938499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [153.939402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [153.940085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [153.940807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.986819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.987228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.987943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.988766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.989566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.990429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.991295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.992064] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.992268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.992513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.992662] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.992978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.993689] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.993854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.001243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.001423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.002224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [154.049362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.049373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.049376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.049379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.052306] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.058237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.067133] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.067266] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.067407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [154.072058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [154.076946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [154.120880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.121366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.128598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.130207] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.131037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.131886] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.132511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.133231] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.215800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.216208] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.216924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.217633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.218379] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.219224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.219971] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.220707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.221412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.222275] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [154.222549] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.222877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.223570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.223732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.231142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.231303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.231978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [154.276292] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.276302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.276305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.276308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.282822] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.287017] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.294477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.294626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.295807] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [154.300621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [154.305479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [154.344953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.345333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.352204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.353660] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.353958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.354238] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.354377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.354546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.444826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.445228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.445963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.446941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.447750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.448713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.449569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.450410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.451072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.451318] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [154.451454] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.451770] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.452468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.452659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.463751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.463924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.464402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [154.510002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.510013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.510016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.510019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.515277] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.520597] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.527228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.527362] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.527503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [154.533327] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [154.538200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [154.568966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.569357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.575054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.576483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.576768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.577050] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.577206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.577379] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.676793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.677196] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.677921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.678604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.679423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.680240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.680980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.681711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.682387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.683153] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [154.683810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.684676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.686921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.687534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.696697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.696936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.697664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [154.742414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.742425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.742428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.742431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.748821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.754047] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.761913] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.762065] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.762208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [154.766784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [154.771646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [154.809022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.809224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.817280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.818900] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.820369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.821237] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.821895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.822531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.910832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.911276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.912067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.912832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.913601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.914457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.915288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.916036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.916720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.916966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [154.917112] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.917370] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.918123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.918270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.925695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.925824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.926161] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [154.968951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.968962] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.968965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.968968] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.973799] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.980144] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.986560] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.986731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.986872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [154.991489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [154.996350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [155.040842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.041331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.049506] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.051120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.051917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.052781] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.053411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.055420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.138818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.139227] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.139943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.140655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.141412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.142183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.142923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.143718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.144440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.145205] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.145949] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.146819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.149104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.149739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.160044] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.160270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.160586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [155.207510] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.207537] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.207541] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.207544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.212783] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.219160] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.226836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.226988] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.227132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [155.231791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [155.236664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [155.272874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.273284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.279036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.280410] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.280651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.280935] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.281076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.281249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.374836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.375246] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.375963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.376679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.377414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.378264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.379024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.379815] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.380567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.381510] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.382173] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.382972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.385209] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.385862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.396178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.396394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.396720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [155.444629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.444639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.444642] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.444645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.449937] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.456202] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.462674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.463969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.464119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [155.469955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [155.474890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [155.520911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.521198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.526874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.528462] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.529297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.530189] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.530851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.531541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.609820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.610228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.610956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.611664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.612411] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.613260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.613994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.614762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.615497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.616258] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.616904] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.617667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.619858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.620468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.629626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.629832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.630487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [155.677247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.677258] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.677261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.677265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.682408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.688801] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.696547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.696709] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.696879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [155.701485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [155.706337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [155.737048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.737344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.743030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.744414] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.744968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.745550] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.746007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.746485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.843670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.844079] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.844775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.845548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.846341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.847191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.847946] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.848749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.849427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.850216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.850496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.850794] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.851493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.851643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.860270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.860403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.860648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [155.906948] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.906959] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.906979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.906983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.914541] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.919765] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.926208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.926370] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.926509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [155.931131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [155.936020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [155.976991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.977422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.984456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.986144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.987011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.987856] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.988382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.988987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.073825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.074231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.074946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.075658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.076394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.077167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.077956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.078763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.079511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.080341] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [156.081064] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.081901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.084136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.084839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.095168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.095382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.095701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [156.145343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.145353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.145356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.145359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.150568] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.154563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.161005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.161138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.161277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [156.165893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [156.171945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [156.200997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.201271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.207010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.208413] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [156.208987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [156.209571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [156.210030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [156.210536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.308819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.309228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.309960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.310673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.311400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.312183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.313008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.313735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.314357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.314601] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [156.314754] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.315030] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.315719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.315857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.322049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.322150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.322289] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [156.367600] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.367614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.367618] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.367621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.371616] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.376774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.382942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.383078] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.383221] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [156.387872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [156.392725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [156.440866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.441710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.448898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.450515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [156.451344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [156.452249] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [156.452942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [156.453639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.535825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.536228] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.536952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.537664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.538394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.539167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.539906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.540659] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.541420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.542178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [156.542755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.543028] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.543734] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.543875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.551276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.551413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.551652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [156.597655] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.597666] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.597669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.597672] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.601657] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.608056] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.614453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.614585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.614779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [156.619353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [156.624243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [156.704934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.705720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.711653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.712987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [156.713233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [156.713561] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [156.713723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [156.713900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.764822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.765231] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.765953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.766664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.767416] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.768260] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.769070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.769876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.770647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.771440] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [156.772169] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.773010] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.775303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.775952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.786304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.786502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.786810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [156.832480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.832490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.832494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.832497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.838914] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.844186] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.849488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.849628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.850618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [156.855513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [156.860402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [156.897007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.897437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.905653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.907415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [156.908292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [156.909335] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [156.910009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [156.910923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.001178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.001585] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [157.002329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [157.003048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.003796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.004633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.005415] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.006214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.006942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [157.007667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [157.008278] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [157.009090] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [157.011372] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.012033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.022383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.022660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.023026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [157.067428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [157.067439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [157.067443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [157.067446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [157.073626] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [157.078920] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [157.086632] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [157.086782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [157.086925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [157.091501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<7> [157.097548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [157.128870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.129207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.133674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.135115] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [157.135709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [157.136326] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [157.136797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [157.137283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [157.224768] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS

<7> [157.229287] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:148:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [157.230178] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [157.230826] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [157.231470] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:147:DDI B/PHY B] [CRTC:88:pipe A]

<7> [157.232124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [157.232829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [157.233446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [157.234119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [157.234768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [157.235377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [157.236127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [157.236747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [157.236901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [157.237040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [157.237177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [157.237314] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [157.237451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [157.237587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [157.237911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [157.238086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [157.238223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [157.238360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [157.238496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [157.238672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [157.238824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [157.238961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [157.239097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [157.239234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [157.239370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [157.239507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [157.239671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [157.239823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [157.239983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [157.240120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [157.240256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [157.240392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [157.240528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [157.240712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [157.240855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [157.240998] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [157.241140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [157.241283] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset

<7> [157.241460] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [157.241606] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:88:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [157.241774] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [157.241910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [157.242045] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [157.242181] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [157.242316] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [157.242455] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [157.242640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:88:pipe A] data rate 559716 num active planes 1

<7> [157.242816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [157.242955] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [157.243112] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:88:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [157.243266] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [157.243405] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:88:pipe A] allocated DPLL 0

<7> [157.243547] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:88:pipe A] reserving DPLL 0

<7> [157.243720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:88:pipe A] enable: yes [modeset]

<7> [157.243860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [157.244000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [157.244138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [157.244276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [157.244414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [157.244553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [157.244701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [157.244840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [157.244977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [157.245114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [157.245257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [157.245398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [157.245538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [157.245686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [157.245848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [157.245986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [157.246123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [157.246260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [157.246396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [157.246532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [157.246697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [157.246848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [157.246984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [157.247120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [157.247256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [157.247390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.247526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.247669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.247805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [157.247940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [157.248073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.248208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.248342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [157.248475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [157.248620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [157.248756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:173] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [157.248891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [157.249025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [157.249181] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [157.249317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [157.249451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [157.249586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [157.249782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [157.261867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.262017] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [157.262172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [157.262355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.262589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.262871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.263092] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.263316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.263508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [157.264074] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [157.264236] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [157.264848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [157.265554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.265713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.275525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.275832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.276066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.276824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.278218] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:147:DDI B/PHY B]

<7> [157.278363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:157:DDI TC1/PHY C]

<7> [157.278505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:161:DDI TC2/PHY D]

<7> [157.278660] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:163:DP-MST A]

<7> [157.278800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:164:DP-MST B]

<7> [157.278980] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [157.279220] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:88:pipe A]

<7> [157.279368] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [157.279699] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output

<7> [157.284364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [157.284547] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [157.285527] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [157.285691] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [157.305131] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [157.305495] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:88:pipe A]

<7> [157.307067] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [157.307007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]

<7> [157.323772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.324245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.324548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.335572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [157.335585] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [157.335588] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD monitor fitHeadless4k

<7> [157.335592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:148:HDMI-A-1] ELD size 36, SAD count 0

<7> [157.337853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [157.340163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [157.343809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [157.343941] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [157.344084] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]

<7> [157.349135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.349335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.362117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]

<6> [157.362269] Console: switching to colour frame buffer device 240x67

<7> [157.366394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]

<7> [157.397756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.398461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.399185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

Results for igt@i915_pm_rpm@system-suspend-execbuf