Results for igt@kms_pm_dc@dc6-dpms

Result: Fail

integration-manifest git-log-oneline i915_display_info7 igt_runner7 runtimes7 results7.json results7-i915-load.json i915_display_info_post_exec7 boot7 dmesg7

DetailValue
Duration 3.34 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.2-g815b131e6 (x86_64) (Linux: 6.18.0-rc4-CI_DRM_17479-g0c721eb08232+ x86_64)
Out 
Using IGT_SRANDOM=1762217162 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc6-dpms
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 [check_dc_counter.part.0+0x66]
  #2 [test_dc_state_dpms+0x72]
  #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
  #4 [main+0x2d]
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Subtest dc6-dpms: FAIL (3.344s)
Err 
Starting subtest: dc6-dpms
(kms_pm_dc:2375) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2375) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2375) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
Subtest dc6-dpms failed.
**** DEBUG ****
(kms_pm_dc:2375) DEBUG: Test requirement passed: igt_pm_pc8_plus_residencies_enabled(data.msr_fd)
(kms_pm_dc:2375) DEBUG: Test requirement passed: !(!str)
(kms_pm_dc:2375) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2375) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2375) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
(kms_pm_dc:2375) igt_core-INFO: Stack trace:
(kms_pm_dc:2375) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_pm_dc:2375) igt_core-INFO:   #1 [check_dc_counter.part.0+0x66]
(kms_pm_dc:2375) igt_core-INFO:   #2 [test_dc_state_dpms+0x72]
(kms_pm_dc:2375) igt_core-INFO:   #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
(kms_pm_dc:2375) igt_core-INFO:   #4 [main+0x2d]
(kms_pm_dc:2375) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_pm_dc:2375) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_pm_dc:2375) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Subtest dc6-dpms: FAIL (3.344s)
Dmesg
<7> [386.397623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [386.397813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [386.397957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [386.399264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [386.400306] Console: switching to colour dummy device 80x25
<6> [386.400361] [IGT] kms_pm_dc: executing
<7> [386.410900] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [386.411499] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [386.411782] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [387.414921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.420847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.422230] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.422471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.422773] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.422921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.423101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.447825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.448203] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.448932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.449701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.450448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.451255] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.452014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.452764] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.453464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.454307] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.454782] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.455072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.455819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.455969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.463345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.464605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.464873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.469561] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.474434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.479314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.484149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.484367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.488951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.490397] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.490816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.491175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.491378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.491609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.492176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [387.492182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.515810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.516010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.516339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.516714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.517147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.517580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.518045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.518455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.518870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.519322] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.519658] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.520148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.521251] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.521520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.527802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.527911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.533925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [387.533950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.538908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.543757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.548636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.553742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.553893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.554008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [387.554013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.557102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.558505] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.558759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.559046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.559187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.559359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.583159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.583368] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.583728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.584236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.584672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.585083] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.585479] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.585908] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.586371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.586884] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.587276] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.587835] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.589096] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.589254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.595402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.595542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.600368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [387.600439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.605247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.610199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.614981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.619878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.620047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.620276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [387.620286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.623454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.624899] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.625155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.625447] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.625596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.625812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.649794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.650056] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.650506] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.651025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.651772] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.652343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.652956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.653522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.654125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.654738] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.655338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.656244] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.658529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.659134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.668211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.668407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.673103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [387.673178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.677990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.682907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.687714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.692627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.692791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.692892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [387.692897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.696241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.697637] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.697921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.698210] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.698355] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.698530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.722802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.723039] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.723450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.723967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.724798] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.725382] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.726004] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.726571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.727217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.727947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.728522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.729315] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.731627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.732358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.742702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.742858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.747624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [387.747685] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.752533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.758595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.763503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.768393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.768543] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.768629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [387.768634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.772002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.773363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.773670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.773977] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.774123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.774300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.797790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.798014] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.798401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.798897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.799693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.800273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.800832] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.801361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.801937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.802564] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.803162] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.803852] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.805915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.806743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.815836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.816082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.821923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [387.821964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [387.821969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.826847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [387.826929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.831745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.836608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.841459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.846340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [387.846325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.846346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.846475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [387.849995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.851360] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.851608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.851960] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.852110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.852288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.876926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.877216] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.877731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.878420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.879029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.879579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.880253] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.880961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.881596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.882329] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.882952] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.883741] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.886174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.886776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.895839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.896043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.900752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [387.900782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [387.900786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.905633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [387.905733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.910521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.915396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.920272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.925139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [387.925287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<6> [387.926697] [IGT] kms_pm_dc: starting subtest dc6-dpms
<7> [387.928730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [387.930168] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [387.930436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [387.930741] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [387.930903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [387.931080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [387.954800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [387.955082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [387.955553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [387.956117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [387.956878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.957430] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.957999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.958602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [387.959232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [387.959865] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [387.960380] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [387.961198] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [387.963533] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [387.964194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [387.972002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [387.973202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [387.973398] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [387.979303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [387.984263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [387.990293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [387.995200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [391.271247] [IGT] kms_pm_dc: finished subtest dc6-dpms, FAIL
<6> [391.271635] [IGT] kms_pm_dc: exiting, ret=98
<7> [391.273278] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [391.273712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [391.273869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [391.274592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [391.276128] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [391.277099] Console: switching to colour frame buffer device 128x48
<7> [391.295044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [391.295313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [391.295555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [391.296957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2025-11-04 07:31:25