Results for igt@kms_pm_dc@dc6-dpms

Result: Fail

integration-manifest git-log-oneline i915_display_info8 igt_runner8 runtimes8 results8.json results8-i915-load.json i915_display_info_post_exec8 boot8 dmesg8

DetailValue
Duration 3.30 seconds
Hostname 
shard-rkl-6
Igt-Version 
IGT-Version: 2.1-gacea60af0 (x86_64) (Linux: 6.17.0-rc2-CI_DRM_17026-gc3cf42892458+ x86_64)
Out 
Using IGT_SRANDOM=1755552297 for randomisation
Opened device: /dev/dri/card0
DMC: fw loaded: yes
Starting subtest: dc6-dpms
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 [check_dc_counter.part.0+0x66]
  #2 [test_dc_state_dpms+0x72]
  #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
  #4 [main+0x2d]
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Subtest dc6-dpms: FAIL (3.299s)
Err 
Starting subtest: dc6-dpms
(kms_pm_dc:2169) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2169) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2169) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
Subtest dc6-dpms failed.
**** DEBUG ****
(kms_pm_dc:2169) DEBUG: Test requirement passed: igt_pm_pc8_plus_residencies_enabled(data.msr_fd)
(kms_pm_dc:2169) DEBUG: Test requirement passed: !(!str)
(kms_pm_dc:2169) CRITICAL: Test assertion failure function check_dc_counter, file ../tests/intel/kms_pm_dc.c:329:
(kms_pm_dc:2169) CRITICAL: Failed assertion: dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count)
(kms_pm_dc:2169) CRITICAL: DC6 state is not achieved
i915_power_domain_info:
Runtime power status: enabled
Power well/domain         Use count
always-on                 0
  DISPLAY_CORE            0
  PIPE_A                  0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_D                  0
  PIPE_PANEL_FITTER_A     0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  PIPE_PANEL_FITTER_D     0
  TRANSCODER_A            0
  TRANSCODER_B            0
  TRANSCODER_C            0
  TRANSCODER_D            0
  TRANSCODER_EDP          0
  TRANSCODER_DSI_A        0
  TRANSCODER_DSI_C        0
  TRANSCODER_VDSC_PW2     0
  PORT_DDI_LANES_A        0
  PORT_DDI_LANES_B        0
  PORT_DDI_LANES_C        0
  PORT_DDI_LANES_D        0
  PORT_DDI_LANES_E        0
  PORT_DDI_LANES_F        0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  PORT_DDI_LANES_TC3      0
  PORT_DDI_LANES_TC4      0
  PORT_DDI_LANES_TC5      0
  PORT_DDI_LANES_TC6      0
  PORT_DDI_IO_A           0
  PORT_DDI_IO_B           0
  PORT_DDI_IO_C           0
  PORT_DDI_IO_D           0
  PORT_DDI_IO_E           0
  PORT_DDI_IO_F           0
  PORT_DDI_IO_TC1         0
  PORT_DDI_IO_TC2         0
  PORT_DDI_IO_TC3         0
  PORT_DDI_IO_TC4         0
  PORT_DDI_IO_TC5         0
  PORT_DDI_IO_TC6         0
  PORT_DSI                0
  PORT_CRT                0
  PORT_OTHER              0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_IO_A                0
  AUX_IO_B                0
  AUX_IO_C                0
  AUX_IO_D                0
  AUX_IO_E                0
  AUX_IO_F                0
  AUX_A                   0
  AUX_B                   0
  AUX_C                   0
  AUX_D                   0
  AUX_E                   0
  AUX_F                   0
  AUX_USBC1               0
  AUX_USBC2               0
  AUX_USBC3               0
  AUX_USBC4               0
  AUX_USBC5               0
  AUX_USBC6               0
  AUX_TBT1                0
  AUX_TBT2                0
  AUX_TBT3                0
  AUX_TBT4                0
  AUX_TBT5                0
  AUX_TBT6                0
  GMBUS                   0
  GT_IRQ                  0
  DC_OFF                  0
  TC_COLD_OFF             0
  INIT                    0
PW_1                      0
DC_off                    0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_A                   0
  AUX_B                   0
  AUX_USBC1               0
  AUX_USBC2               0
  DC_OFF                  0
  INIT                    0
PW_3                      0
  PIPE_B                  0
  PIPE_C                  0
  PIPE_PANEL_FITTER_B     0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_B            0
  TRANSCODER_C            0
  PORT_DDI_LANES_TC1      0
  PORT_DDI_LANES_TC2      0
  VGA                     0
  AUDIO_MMIO              0
  AUDIO_PLAYBACK          0
  AUX_USBC1               0
  AUX_USBC2               0
  INIT                    0
PW_4                      0
  PIPE_C                  0
  PIPE_PANEL_FITTER_C     0
  TRANSCODER_C            0
  INIT                    0
DDI_IO_A                  0
  PORT_DDI_IO_A           0
DDI_IO_B                  0
  PORT_DDI_IO_B           0
DDI_IO_TC1                0
  PORT_DDI_IO_TC1         0
DDI_IO_TC2                0
  PORT_DDI_IO_TC2         0
AUX_A                     0
  AUX_IO_A                0
  AUX_A                   0
AUX_B                     0
  AUX_IO_B                0
  AUX_B                   0
AUX_USBC1                 0
  AUX_USBC1               0
AUX_USBC2                 0
  AUX_USBC2               0
(kms_pm_dc:2169) igt_core-INFO: Stack trace:
(kms_pm_dc:2169) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_pm_dc:2169) igt_core-INFO:   #1 [check_dc_counter.part.0+0x66]
(kms_pm_dc:2169) igt_core-INFO:   #2 [test_dc_state_dpms+0x72]
(kms_pm_dc:2169) igt_core-INFO:   #3 ../tests/intel/kms_pm_dc.c:827 __igt_unique____real_main733()
(kms_pm_dc:2169) igt_core-INFO:   #4 [main+0x2d]
(kms_pm_dc:2169) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_pm_dc:2169) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_pm_dc:2169) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Subtest dc6-dpms: FAIL (3.299s)
Dmesg
<6> [178.928072] [IGT] kms_pm_dc: executing
<7> [178.928490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [178.940028] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [178.940675] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [178.940927] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [179.943148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [179.948751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [179.950204] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [179.950694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [179.951004] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [179.951145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [179.951327] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [179.975535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [179.975616] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [179.975760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [179.975941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [179.976181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [179.976429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [179.976643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [179.976899] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [179.977082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [179.977407] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [179.977585] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [179.977824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [179.978571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [179.978707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [179.988543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [179.989799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [179.989964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [179.994691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [179.999591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.004543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.009371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.009606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.011306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [180.011314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.015350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.016803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.017046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.017367] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.017527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.017708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.041547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.041639] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.041784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.041964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.042196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.042439] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.042680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.042894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.043083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.043471] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.043631] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.044093] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.044827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.044966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.056018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.056125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.060930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [180.061041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.065825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.070726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.075576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.080483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.080657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [180.080630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.080663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.086514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.087973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.088236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.088606] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.088749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.088921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.112478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.112650] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.112797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.112974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.113200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.113469] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.113700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.113896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.114074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.114365] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.114544] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.114786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.115526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.115661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.124237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.124339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.130426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [180.130504] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.136566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.141484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.147516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.152408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.152553] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.152658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [180.152663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.157194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.158600] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.158843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.159124] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.159264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.159476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.183801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.184036] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.184468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.184888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.185358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.185820] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.186272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.186769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.187238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.187770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.188174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.188771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.190455] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.190926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.201149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.201325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.207257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [180.207299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.213354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.219499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.225557] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.230480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.230624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.230772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [180.230777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.235286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.236638] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.236873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.237157] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.237296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.237505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.261529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.261781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.262187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.262676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.263164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.263673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.264138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.264669] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.265165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.265721] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.266156] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.266842] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.268593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.269065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.279284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.279509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.285388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [180.285447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.291535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.296502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.302470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.307433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.307595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.307838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1]
<7> [180.307848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.312201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.313582] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.313819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.314100] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.314239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.314422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.338552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.338793] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.339181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.339660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.340135] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.340629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.341160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.341718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.342213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.342756] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.343187] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.343863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.345656] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.346123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.355163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.355397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.361266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:148:HDMI-A-1] disconnected
<7> [180.361299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2]
<7> [180.361308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.367355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:158:HDMI-A-2] disconnected
<7> [180.367427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.373481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.378392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.384469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.390582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1]
<7> [180.390535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.390588] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.390702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.395371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.396792] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.397327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.397660] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.397802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.397973] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.421519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.421751] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.422134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.422598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.423063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.423550] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.423995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.424450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.424920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.425424] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.425826] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.426382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.428011] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.428510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.438692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.438888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.443593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:162:DP-1] disconnected
<7> [180.443640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<7> [180.448498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.453436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.459464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.465552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3]
<7> [180.465507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [180.465558] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.465671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [180.470423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [180.471769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [180.471999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [180.472280] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [180.472431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [180.472648] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [180.496479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [180.496702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [180.497148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [180.497676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [180.498193] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.498728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.499224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.499780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [180.500318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [180.500906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0
<7> [180.501390] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [180.502011] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [180.503909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [180.504431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [180.514655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [180.514829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [180.519541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:169:HDMI-A-3] disconnected
<7> [180.519633] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:148:HDMI-A-1]
<6> [180.520765] [IGT] kms_pm_dc: starting subtest dc6-dpms
<7> [180.524480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:158:HDMI-A-2]
<7> [180.530531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:162:DP-1]
<7> [180.535507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:169:HDMI-A-3]
<7> [180.541519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<6> [183.819753] [IGT] kms_pm_dc: finished subtest dc6-dpms, FAIL
<6> [183.819991] [IGT] kms_pm_dc: exiting, ret=98
<7> [183.821598] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [183.821796] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
Created at 2025-08-18 22:39:33