<5>[ 0.000000] Linux version 6.12.0-CI_DRM_15754-g24e36a5200d6+ (kbuild@gfx-ci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Nov 27 14:58:04 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd95698 ESRT=0x5bda7798 MOKvar=0x60c4b000 TPMEventLog=0x63f0f018
<6>[ 0.000000] efi: Remove mem302: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem304: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.6 present.
<6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3400.000 MHz processor
<6>[ 0.000000] tsc: Detected 3379.200 MHz TSC
<7>[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000
<6>[ 0.000022] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000023] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000598] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000600] last_pfn = 0x64000 max_arch_pfn = 0x400000000
<6>[ 0.004533] esrt: Reserving ESRT space from 0x000000005bda7798 to 0x000000005bda78c0.
<7>[ 0.004543] e820: update [mem 0x5bda7000-0x5bda7fff] usable ==> reserved
<6>[ 0.004570] Using GB pages for direct mapping
<6>[ 0.005365] printk: log_buf_len: 1048576 bytes
<6>[ 0.005367] printk: early log buf free: 258896(98%)
<6>[ 0.005368] Secure boot disabled
<6>[ 0.005371] ACPI: Early table checksum verification disabled
<6>[ 0.005377] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL )
<6>[ 0.005381] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005386] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013)
<6>[ 0.005390] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013)
<6>[ 0.005392] ACPI: FACS 0x0000000063DF7000 000040
<6>[ 0.005393] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005402] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005406] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005408] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005410] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005412] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005414] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000)
<6>[ 0.005415] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005417] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005421] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005423] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005424] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013)
<6>[ 0.005426] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005427] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930)
<6>[ 0.005429] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005431] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005433] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005435] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005437] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013)
<6>[ 0.005439] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005441] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005443] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005445] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005448] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005450] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005452] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013)
<6>[ 0.005454] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005456] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005457] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013)
<6>[ 0.005459] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005461] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005463] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930)
<6>[ 0.005465] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005467] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005469] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930)
<6>[ 0.005471] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013)
<6>[ 0.005472] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D)
<6>[ 0.005474] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013)
<6>[ 0.005476] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113]
<6>[ 0.005478] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89]
<6>[ 0.005478] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f]
<6>[ 0.005479] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b]
<6>[ 0.005479] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c]
<6>[ 0.005479] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3]
<6>[ 0.005480] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa]
<6>[ 0.005480] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393]
<6>[ 0.005481] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae]
<6>[ 0.005481] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f]
<6>[ 0.005482] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348]
<6>[ 0.005482] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba]
<6>[ 0.005483] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7]
<6>[ 0.005484] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097]
<6>[ 0.005484] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02]
<6>[ 0.005485] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493]
<6>[ 0.005485] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6]
<6>[ 0.005486] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8]
<6>[ 0.005486] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037]
<6>[ 0.005487] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357]
<6>[ 0.005487] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b]
<6>[ 0.005488] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee]
<6>[ 0.005488] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e]
<6>[ 0.005489] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b]
<6>[ 0.005490] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359]
<6>[ 0.005490] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d]
<6>[ 0.005491] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b]
<6>[ 0.005491] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb]
<6>[ 0.005492] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027]
<6>[ 0.005492] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5]
<6>[ 0.005493] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c]
<6>[ 0.005493] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033]
<6>[ 0.005494] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053]
<6>[ 0.005494] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a]
<6>[ 0.005495] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190]
<6>[ 0.005495] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad]
<6>[ 0.005496] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068]
<6>[ 0.005496] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7]
<6>[ 0.005496] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043]
<6>[ 0.005497] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014]
<6>[ 0.005498] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819]
<6>[ 0.005498] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2]
<6>[ 0.005499] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f]
<6>[ 0.005499] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073]
<6>[ 0.005500] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f]
<6>[ 0.005501] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037]
<6>[ 0.005584] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005796] No NUMA configuration found
<6>[ 0.005797] Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
<6>[ 0.005805] NODE_DATA(0) allocated [mem 0x87fb52fc0-0x87fb7dfff]
<6>[ 0.005957] Zone ranges:
<6>[ 0.005958] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005959] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005960] Normal [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.005961] Device empty
<6>[ 0.005961] Movable zone start for each node
<6>[ 0.005962] Early memory node ranges
<6>[ 0.005962] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005963] node 0: [mem 0x0000000000100000-0x0000000060a3efff]
<6>[ 0.005964] node 0: [mem 0x0000000063fff000-0x0000000063ffffff]
<6>[ 0.005964] node 0: [mem 0x0000000100000000-0x000000087fffffff]
<6>[ 0.005966] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
<6>[ 0.005973] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.006013] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.008900] On node 0, zone DMA32: 13760 pages in unavailable ranges
<6>[ 0.051868] On node 0, zone Normal: 16384 pages in unavailable ranges
<6>[ 0.052349] ACPI: PM-Timer IO Port: 0x1808
<4>[ 0.052355] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10
<4>[ 0.052355] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant
<6>[ 0.052359] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.052404] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.052406] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.052408] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.052410] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.052411] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<7>[ 0.052424] e820: update [mem 0x5bd46000-0x5bd60fff] usable ==> reserved
<6>[ 0.052433] TSC deadline timer available
<6>[ 0.052435] CPU topo: Max. logical packages: 1
<6>[ 0.052435] CPU topo: Max. logical dies: 1
<6>[ 0.052435] CPU topo: Max. dies per package: 1
<6>[ 0.052437] CPU topo: Max. threads per core: 2
<6>[ 0.052438] CPU topo: Num. cores per package: 16
<6>[ 0.052438] CPU topo: Num. threads per package: 22
<6>[ 0.052439] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs
<6>[ 0.052455] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.052456] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.052457] PM: hibernation: Registered nosave memory: [mem 0x5bd46000-0x5bd60fff]
<6>[ 0.052458] PM: hibernation: Registered nosave memory: [mem 0x5bda7000-0x5bda7fff]
<6>[ 0.052459] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63db6fff]
<6>[ 0.052459] PM: hibernation: Registered nosave memory: [mem 0x63db7000-0x63edbfff]
<6>[ 0.052460] PM: hibernation: Registered nosave memory: [mem 0x63edc000-0x63ffefff]
<6>[ 0.052461] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x787fffff]
<6>[ 0.052461] PM: hibernation: Registered nosave memory: [mem 0x78800000-0xfed1ffff]
<6>[ 0.052461] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.052462] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.052464] [mem 0x78800000-0xfed1ffff] available for PCI devices
<6>[ 0.052465] Booting paravirtualized kernel on bare hardware
<6>[ 0.052468] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.052479] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1
<6>[ 0.053962] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.053966] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.053968] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
<7>[ 0.053971] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
<7>[ 0.053973] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- --
<5>[ 0.053990] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.054062] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.054077] random: crng init done
<6>[ 0.056894] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.058304] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.058432] Fallback order for Node 0: 0
<6>[ 0.058435] Built 1 zonelists, mobility grouping on. Total pages: 8260062
<6>[ 0.058436] Policy zone: Normal
<6>[ 0.058449] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.058450] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.058452] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.059868] software IO TLB: area num 32.
<4>[ 0.120468] **********************************************************
<4>[ 0.120469] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.120469] ** **
<4>[ 0.120470] ** This system shows unhashed kernel memory addresses **
<4>[ 0.120470] ** via the console, logs, and other interfaces. This **
<4>[ 0.120470] ** might reduce the security of your system. **
<4>[ 0.120470] ** **
<4>[ 0.120471] ** If you see this message and you are not debugging **
<4>[ 0.120471] ** the kernel, report this immediately to your system **
<4>[ 0.120471] ** administrator! **
<4>[ 0.120471] ** **
<4>[ 0.120472] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.120472] **********************************************************
<6>[ 0.121942] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1
<6>[ 0.122348] ftrace: allocating 59000 entries in 231 pages
<6>[ 0.131062] ftrace: allocated 231 pages with 6 groups
<6>[ 0.132598] Dynamic Preempt: voluntary
<6>[ 0.133566] Running RCU self tests
<6>[ 0.133567] Running RCU synchronous self tests
<6>[ 0.133574] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.133575] rcu: RCU lockdep checking is enabled.
<6>[ 0.133575] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22.
<6>[ 0.133576] Trampoline variant of Tasks RCU enabled.
<6>[ 0.133576] Rude variant of Tasks RCU enabled.
<6>[ 0.133576] Tracing variant of Tasks RCU enabled.
<6>[ 0.133577] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.133577] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22
<6>[ 0.133668] Running RCU synchronous self tests
<6>[ 0.133673] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.133678] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.133683] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22.
<6>[ 0.144665] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16
<6>[ 0.145217] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.145573] Console: colour dummy device 80x25
<6>[ 0.145583] printk: legacy console [tty0] enabled
<4>[ 0.146749] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.146757] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.146761] ... MAX_LOCK_DEPTH: 48
<4>[ 0.146764] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.146768] ... CLASSHASH_SIZE: 4096
<4>[ 0.146772] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.146776] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.146780] ... CHAINHASH_SIZE: 262144
<4>[ 0.146783] memory used by lock dependency info: 54145 kB
<4>[ 0.146788] memory used for stack traces: 4224 kB
<4>[ 0.146792] per task-struct memory footprint: 1920 bytes
<6>[ 0.146865] ACPI: Core revision 20240827
<6>[ 0.147871] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.147929] APIC: Switch to symmetric I/O mode setup
<6>[ 0.147935] DMAR: Host address width 42
<6>[ 0.147939] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.147981] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e
<6>[ 0.147989] DMAR: DRHD base: 0x000000fc801000 flags: 0x1
<6>[ 0.148008] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde
<6>[ 0.148015] DMAR: SATC flags: 0x1
<6>[ 0.148027] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1
<6>[ 0.148033] DMAR-IR: HPET id 0 under DRHD base 0xfc801000
<6>[ 0.148038] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.149740] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.154075] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 0.154095] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200)
<6>[ 0.154160] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.154165] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.154376] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.154381] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.154389] process: using mwait in idle threads
<6>[ 0.154398] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.154408] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.154414] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.154424] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.154432] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.154450] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.154457] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.154464] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.154471] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.154480] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.154489] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.154496] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.154501] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.154508] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.155089] Freeing SMP alternatives memory: 48K
<6>[ 0.155089] pid_max: default: 32768 minimum: 301
<6>[ 0.155089] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.155089] landlock: Up and running.
<6>[ 0.155089] Yama: becoming mindful.
<6>[ 0.155089] AppArmor: AppArmor initialized
<6>[ 0.155089] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.155089] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.155089] Running RCU synchronous self tests
<6>[ 0.155089] Running RCU synchronous self tests
<6>[ 0.155089] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4)
<6>[ 0.155089] Running RCU Tasks wait API self tests
<6>[ 0.155089] Running RCU Tasks Rude wait API self tests
<6>[ 0.155089] Running RCU Tasks Trace wait API self tests
<6>[ 0.155089] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.155290] core: cpu_core PMU driver:
<6>[ 0.155300] ... version: 5
<6>[ 0.155304] ... bit width: 48
<6>[ 0.155307] ... generic registers: 8
<6>[ 0.155311] ... value mask: 0000ffffffffffff
<6>[ 0.155316] ... max period: 00007fffffffffff
<6>[ 0.155320] ... fixed-purpose events: 4
<6>[ 0.155324] ... event mask: 0001000f000000ff
<6>[ 0.155376] signal: max sigframe size: 3632
<6>[ 0.155402] Estimated ratio of average max frequency by base frequency (times 1024): 1445
<6>[ 0.155516] rcu: Hierarchical SRCU implementation.
<6>[ 0.155521] rcu: Max phase no-delay instances is 400.
<6>[ 0.155685] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
<6>[ 0.159207] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.159984] smp: Bringing up secondary CPUs ...
<6>[ 0.160424] smpboot: x86: Booting SMP configuration:
<6>[ 0.160433] .... node #0, CPUs: #1
<6>[ 0.160510] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.162265] #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21
<6>[ 0.009739] core: cpu_atom PMU driver: PEBS-via-PT
<6>[ 0.009739] ... version: 5
<6>[ 0.009739] ... bit width: 48
<6>[ 0.009739] ... generic registers: 8
<6>[ 0.009739] ... value mask: 0000ffffffffffff
<6>[ 0.009739] ... max period: 00007fffffffffff
<6>[ 0.009739] ... fixed-purpose events: 3
<6>[ 0.009739] ... event mask: 00000007000000ff
<4>[ 0.190244] #2 #4 #5 #7 #9 #11
<6>[ 0.200170] smp: Brought up 1 node, 22 CPUs
<6>[ 0.200170] smpboot: Total of 22 processors activated (148684.80 BogoMIPS)
<6>[ 0.203106] Memory: 32229232K/33040248K available (24576K kernel code, 5553K rwdata, 9128K rodata, 5576K init, 68480K bss, 778304K reserved, 0K cma-reserved)
<6>[ 0.207321] devtmpfs: initialized
<6>[ 0.207336] x86/mm: Memory block size: 128MB
<6>[ 0.226453] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes)
<6>[ 0.227156] Running RCU synchronous self tests
<6>[ 0.227201] Running RCU synchronous self tests
<6>[ 0.227201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.227201] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear)
<6>[ 0.227650] pinctrl core: initialized pinctrl subsystem
<6>[ 0.228451] PM: RTC time: 17:43:36, date: 2024-11-27
<6>[ 0.229352] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.230394] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.230795] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.231196] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.231264] audit: initializing netlink subsys (disabled)
<5>[ 0.231303] audit: type=2000 audit(1732729416.077:1): state=initialized audit_enabled=0 res=1
<6>[ 0.232156] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.232158] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.232165] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.232170] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.232175] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.232227] EISA bus registered
<6>[ 0.232259] cpuidle: using governor ladder
<6>[ 0.232259] cpuidle: using governor menu
<6>[ 0.232259] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.232597] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.232630] PCI: Using configuration type 1 for base access
<6>[ 0.233229] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.234135] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.234142] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.234148] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.234154] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.253090] raid6: avx2x4 gen() 56827 MB/s
<6>[ 0.270090] raid6: avx2x2 gen() 59510 MB/s
<6>[ 0.287090] raid6: avx2x1 gen() 57077 MB/s
<6>[ 0.287095] raid6: using algorithm avx2x2 gen() 59510 MB/s
<6>[ 0.304090] raid6: .... xor() 42671 MB/s, rmw enabled
<6>[ 0.304095] raid6: using avx2x2 recovery algorithm
<6>[ 0.304557] fbcon: Taking over console
<6>[ 0.304756] ACPI: Added _OSI(Module Device)
<6>[ 0.304761] ACPI: Added _OSI(Processor Device)
<6>[ 0.304765] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.304769] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.977202] ACPI: 28 ACPI AML tables successfully acquired and loaded
<6>[ 0.991240] ACPI: EC: EC started
<6>[ 0.991259] ACPI: EC: interrupt blocked
<6>[ 0.996338] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.996349] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.065098] Callback from call_rcu_tasks() invoked.
<6>[ 1.296974] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.296991] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.379481] ACPI: Interpreter enabled
<6>[ 1.379610] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.379615] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.385845] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.385855] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.414704] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.414735] ACPI: Enabled 8 GPEs in block 80 to DF
<6>[ 1.511634] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.785655] ACPI: \_SB_.PC00.RP01.PXP_: New power resource
<6>[ 1.812583] ACPI: \_SB_.PC00.RP06.PXP_: New power resource
<6>[ 1.819511] ACPI: \_SB_.PC00.RP07.PXP_: New power resource
<6>[ 1.834051] ACPI: \_SB_.PC00.RP09.PXP_: New power resource
<6>[ 1.840719] ACPI: \_SB_.PC00.RP10.PXP_: New power resource
<6>[ 1.848641] ACPI: \_SB_.PC00.RP11.PXP_: New power resource
<6>[ 1.854597] ACPI: \_SB_.PC00.RP12.PXP_: New power resource
<6>[ 2.080337] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.080958] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.081506] ACPI: \_SB_.PC00.D3C_: New power resource
<6>[ 2.246619] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.247665] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.248690] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.249717] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.251341] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.256830] ACPI: \PIN_: New power resource
<6>[ 2.263061] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.263093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.267756] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.275864] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.299550] PCI host bridge to bus 0000:00
<6>[ 2.299613] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.299630] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.299644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.299661] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
<6>[ 2.299676] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 2.299694] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.317497] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.318459] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.318490] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref]
<6>[ 2.318512] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
<6>[ 2.318581] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
<6>[ 2.318596] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.318661] pci 0000:00:02.0: PME# supported from D0 D3hot
<6>[ 2.318704] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref]
<6>[ 2.318717] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs
<6>[ 2.321119] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.321151] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit]
<6>[ 2.324401] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.324428] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit]
<6>[ 2.324459] pci 0000:00:05.0: enabling Extended Tags
<6>[ 2.326136] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port
<6>[ 2.326180] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.326197] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 2.326347] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
<6>[ 2.326416] pci 0000:00:06.0: PTM enabled (root), 4ns granularity
<6>[ 2.336605] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.336650] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.336665] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 2.336686] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 2.336808] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.336863] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.345875] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port
<6>[ 2.345926] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.345941] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 2.345962] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 2.346081] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold
<6>[ 2.346708] pci 0000:00:07.3: PTM enabled (root), 4ns granularity
<6>[ 2.355887] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint
<6>[ 2.355920] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit]
<6>[ 2.356652] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.356677] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit]
<6>[ 2.356708] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.357013] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.357039] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit]
<6>[ 2.357064] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit]
<6>[ 2.357804] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.357836] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit]
<6>[ 2.357946] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.361194] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.361227] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit]
<6>[ 2.361249] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit]
<6>[ 2.361379] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.361387] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.364619] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.364649] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit]
<6>[ 2.364740] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.369695] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.369727] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit]
<6>[ 2.369827] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.374564] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.374597] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit]
<6>[ 2.374620] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit]
<6>[ 2.375029] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.375126] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.377680] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.377742] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.380683] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.380751] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.383289] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.383352] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.385911] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.385947] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit]
<6>[ 2.386062] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.391673] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.391703] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 2.391720] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff]
<6>[ 2.392154] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.392217] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.393155] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.393220] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.396191] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.398725] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.398784] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit]
<6>[ 2.398850] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit]
<6>[ 2.398992] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.399697] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.399733] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit]
<6>[ 2.399771] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.402072] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.402178] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.402586] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.402626] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff]
<6>[ 2.402796] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.405089] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.405089] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit]
<6>[ 2.407137] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 2.407423] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 2.407696] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 2.834616] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 8.176580] Low-power S0 idle used by default for system suspend
<6>[ 8.257858] ACPI: EC: interrupt unblocked
<6>[ 8.257876] ACPI: EC: event unblocked
<6>[ 8.257914] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 8.257926] ACPI: EC: GPE=0x6e
<6>[ 8.257938] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 8.257957] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 8.259279] iommu: Default domain type: Translated
<6>[ 8.259292] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 8.261357] SCSI subsystem initialized
<7>[ 8.261468] libata version 3.00 loaded.
<6>[ 8.261468] ACPI: bus type USB registered
<6>[ 8.262138] usbcore: registered new interface driver usbfs
<6>[ 8.262204] usbcore: registered new interface driver hub
<6>[ 8.262335] usbcore: registered new device driver usb
<6>[ 8.262578] pps_core: LinuxPPS API ver. 1 registered
<6>[ 8.262587] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 8.262628] PTP clock support registered
<6>[ 8.263521] EDAC MC: Ver: 3.0.0
<6>[ 8.264472] efivars: Registered efivars operations
<6>[ 8.267192] NetLabel: Initializing
<6>[ 8.267202] NetLabel: domain hash size = 128
<6>[ 8.267211] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 8.267353] NetLabel: unlabeled traffic allowed by default
<6>[ 8.267383] mctp: management component transport protocol core
<6>[ 8.267394] NET: Registered PF_MCTP protocol family
<6>[ 8.267457] PCI: Using ACPI for IRQ routing
<7>[ 8.285288] PCI: pci_cache_line_size set to 64 bytes
<6>[ 8.285542] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 8.285822] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 8.285840] e820: reserve RAM buffer [mem 0x5bd46000-0x5bffffff]
<7>[ 8.285846] e820: reserve RAM buffer [mem 0x5bda7000-0x5bffffff]
<7>[ 8.285851] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff]
<6>[ 8.286249] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 8.286249] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 8.286249] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 8.286249] vgaarb: loaded
<6>[ 8.286474] clocksource: Switched to clocksource tsc-early
<5>[ 8.295034] VFS: Disk quotas dquot_6.6.0
<6>[ 8.295086] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 8.296704] AppArmor: AppArmor Filesystem Enabled
<6>[ 8.297032] pnp: PnP ACPI init
<6>[ 8.298720] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 8.298747] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 8.299709] system 00:01: [io 0x1854-0x1857] has been reserved
<6>[ 8.302236] system 00:03: [io 0x06a4] has been reserved
<6>[ 8.302255] system 00:03: [io 0x06a0] has been reserved
<4>[ 8.342256] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<4>[ 8.342281] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 8.342514] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 8.342533] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 8.342555] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 8.342575] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 8.342595] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 8.342612] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 8.352640] system 00:05: [io 0x2000-0x20fe] has been reserved
<4>[ 8.355426] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref]
<6>[ 8.360566] pnp: PnP ACPI: found 8 devices
<6>[ 8.377559] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 8.378628] NET: Registered PF_INET protocol family
<6>[ 8.378930] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 8.382802] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 8.383024] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 8.383354] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 8.384644] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 8.386287] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 8.387187] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 8.388152] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 8.389150] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 8.389242] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
<6>[ 8.389298] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned
<6>[ 8.389320] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 8.389332] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 8.389345] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned
<6>[ 8.389396] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned
<6>[ 8.389447] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned
<6>[ 8.389499] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned
<6>[ 8.389549] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned
<6>[ 8.389602] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned
<6>[ 8.389654] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned
<6>[ 8.389690] pci 0000:00:06.0: PCI bridge to [bus 01]
<6>[ 8.389723] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff]
<6>[ 8.389747] pci 0000:00:07.0: PCI bridge to [bus 02-2b]
<6>[ 8.389768] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 8.389782] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff]
<6>[ 8.389795] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 8.389817] pci 0000:00:07.3: PCI bridge to [bus 2c-55]
<6>[ 8.389827] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]
<6>[ 8.389840] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff]
<6>[ 8.389853] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 8.389871] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 8.389882] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 8.389893] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 8.389904] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window]
<6>[ 8.389915] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window]
<6>[ 8.389928] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff]
<6>[ 8.389939] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
<6>[ 8.389948] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff]
<6>[ 8.389958] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref]
<6>[ 8.389972] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff]
<6>[ 8.389981] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff]
<6>[ 8.389992] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref]
<6>[ 8.392046] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 8.395352] PCI: CLS 0 bytes, default 64
<6>[ 8.395453] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 8.395495] DMAR: No RMRR found
<6>[ 8.395511] DMAR: No ATSR found
<6>[ 8.395519] DMAR: IOMMU feature sc_support inconsistent
<6>[ 8.395523] DMAR: dmar0: Using Queued invalidation
<6>[ 8.395565] DMAR: dmar1: Using Queued invalidation
<6>[ 8.396944] pci 0000:00:02.0: Adding to iommu group 0
<6>[ 8.397482] pci 0000:00:00.0: Adding to iommu group 1
<6>[ 8.397578] pci 0000:00:04.0: Adding to iommu group 2
<6>[ 8.397674] pci 0000:00:05.0: Adding to iommu group 3
<6>[ 8.397795] pci 0000:00:06.0: Adding to iommu group 4
<6>[ 8.397917] pci 0000:00:07.0: Adding to iommu group 5
<6>[ 8.398051] pci 0000:00:07.3: Adding to iommu group 6
<6>[ 8.398149] pci 0000:00:08.0: Adding to iommu group 7
<6>[ 8.398240] pci 0000:00:0a.0: Adding to iommu group 8
<6>[ 8.398333] pci 0000:00:0b.0: Adding to iommu group 9
<6>[ 8.398451] pci 0000:00:0d.0: Adding to iommu group 10
<6>[ 8.398522] pci 0000:00:0d.3: Adding to iommu group 10
<6>[ 8.398624] pci 0000:00:12.0: Adding to iommu group 11
<6>[ 8.398746] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 8.398815] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 8.398964] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 8.399033] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 8.399104] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 8.399173] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 8.399292] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 8.399366] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 8.399489] pci 0000:00:19.0: Adding to iommu group 15
<6>[ 8.399562] pci 0000:00:19.1: Adding to iommu group 15
<6>[ 8.399719] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 8.399806] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 8.399884] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 8.399964] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 8.400044] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 8.400159] pci 0000:01:00.0: Adding to iommu group 17
<6>[ 8.400646] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 8.400658] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 8.400668] software IO TLB: mapped [mem 0x0000000056dec000-0x000000005adec000] (64MB)
<6>[ 8.402273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns
<6>[ 8.402355] clocksource: Switched to clocksource tsc
<6>[ 8.402505] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 8.410437] Initialise system trusted keyrings
<5>[ 8.410538] Key type blacklist registered
<6>[ 8.411496] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 8.423595] zbud: loaded
<6>[ 8.425232] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 8.425391] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 8.425400] ntfs3: Read-only LZX/Xpress compression included
<5>[ 8.425873] integrity: Platform Keyring initialized
<5>[ 8.425901] integrity: Machine keyring initialized
<6>[ 8.434636] xor: automatically using best checksumming function avx
<5>[ 8.434650] Key type asymmetric registered
<5>[ 8.434665] Asymmetric key parser 'x509' registered
<6>[ 8.434819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 8.435220] io scheduler mq-deadline registered
<6>[ 8.436599] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 8.439016] pcieport 0000:00:06.0: PME: Signaling with IRQ 122
<6>[ 8.441139] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
<6>[ 8.443080] pcieport 0000:00:07.3: PME: Signaling with IRQ 124
<6>[ 8.443508] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 8.451364] ACPI: AC: AC Adapter [ADP1] (on-line)
<6>[ 8.451733] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 8.452060] ACPI: button: Lid Switch [LID0]
<6>[ 8.452373] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 8.452565] ACPI: button: Sleep Button [SLPB]
<6>[ 8.452914] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 8.453095] ACPI: button: Power Button [PWRB]
<6>[ 8.559002] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 8.559010] ACPI: thermal: Thermal Zone [TZ00] (39 C)
<6>[ 8.559966] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 8.560679] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 8.562378] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 8.582602] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 8.592721] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 8.594283] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 8.616689] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 8.618350] hpet_acpi_add: no address or irqs in _CRS
<6>[ 8.618422] Linux agpgart interface v0.103
<6>[ 8.645610] ACPI: bus type drm_connector registered
<6>[ 8.667937] loop: module loaded
<6>[ 8.717773] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 8.806786] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 8.956848] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 9.100581] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 9.255847] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
<6>[ 9.398786] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002)
<5>[ 9.532198] Key type psk registered
<6>[ 9.535517] nvme 0000:01:00.0: platform quirk: setting simple suspend
<6>[ 9.536358] nvme nvme0: pci function 0000:01:00.0
<6>[ 9.536391] tun: Universal TUN/TAP device driver, 1.6
<6>[ 9.537321] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 9.537466] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 9.538731] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 9.540655] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 9.540682] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 9.540705] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 9.541129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 9.541154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 9.541167] usb usb1: Product: xHCI Host Controller
<6>[ 9.541176] usb usb1: Manufacturer: Linux 6.12.0-CI_DRM_15754-g24e36a5200d6+ xhci-hcd
<6>[ 9.541189] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 9.542182] hub 1-0:1.0: USB hub found
<6>[ 9.542288] hub 1-0:1.0: 1 port detected
<6>[ 9.548701] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 9.548721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 9.548735] usb usb2: Product: xHCI Host Controller
<6>[ 9.548755] usb usb2: Manufacturer: Linux 6.12.0-CI_DRM_15754-g24e36a5200d6+ xhci-hcd
<6>[ 9.548769] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 9.549496] hub 2-0:1.0: USB hub found
<6>[ 9.549569] hub 2-0:1.0: 4 ports detected
<6>[ 9.584347] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 9.584381] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 9.585574] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 9.587300] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 9.587325] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 9.587345] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 9.587584] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 9.587600] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 9.587612] usb usb3: Product: xHCI Host Controller
<6>[ 9.587621] usb usb3: Manufacturer: Linux 6.12.0-CI_DRM_15754-g24e36a5200d6+ xhci-hcd
<6>[ 9.587634] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 9.588343] hub 3-0:1.0: USB hub found
<6>[ 9.588401] hub 3-0:1.0: 12 ports detected
<6>[ 9.609410] nvme nvme0: allocated 64 MiB host memory buffer.
<6>[ 9.632622] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 9.632643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 9.632656] usb usb4: Product: xHCI Host Controller
<6>[ 9.632666] usb usb4: Manufacturer: Linux 6.12.0-CI_DRM_15754-g24e36a5200d6+ xhci-hcd
<6>[ 9.632679] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 9.633502] hub 4-0:1.0: USB hub found
<6>[ 9.633557] hub 4-0:1.0: 2 ports detected
<6>[ 9.639512] usbcore: registered new interface driver usb-storage
<6>[ 9.639668] usbcore: registered new interface driver usbserial_generic
<6>[ 9.639766] usbserial: USB Serial support registered for generic
<6>[ 9.639833] usbcore: registered new interface driver ftdi_sio
<6>[ 9.639884] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 9.639954] usbcore: registered new interface driver pl2303
<6>[ 9.639998] usbserial: USB Serial support registered for pl2303
<6>[ 9.640144] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 9.640157] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 9.655148] nvme nvme0: 16/0/0 default/read/poll queues
<6>[ 9.666940] nvme0n1: p1 p2
<3>[ 10.341524] i8042: Can't read CTR while initializing i8042
<3>[ 10.341537] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 10.342180] mousedev: PS/2 mouse device common for all mice
<6>[ 10.343315] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 10.344951] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 10.345123] rtc_cmos rtc_cmos: setting system clock to 2024-11-27T17:43:46 UTC (1732729426)
<6>[ 10.345305] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 10.345370] i2c_dev: i2c /dev entries driver
<6>[ 10.350359] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 10.350377] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 10.350390] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 10.350435] device-mapper: uevent: version 1.0.3
<6>[ 10.350835] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 10.350984] platform eisa.0: Probing EISA bus 0
<4>[ 10.351001] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 10.351019] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 10.351035] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 10.351050] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 10.351065] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 10.351080] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 10.351095] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 10.351110] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 10.351125] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 10.351137] platform eisa.0: EISA: Detected 0 cards
<6>[ 10.351149] intel_pstate: Intel P-state driver initializing
<6>[ 10.361637] intel_pstate: HWP enabled
<6>[ 10.361645] sdhci: Secure Digital Host Controller Interface driver
<6>[ 10.361650] sdhci: Copyright(c) Pierre Ossman
<6>[ 10.361759] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 10.364342] drop_monitor: Initializing network drop monitor service
<6>[ 10.364561] NET: Registered PF_INET6 protocol family
<6>[ 10.368266] Segment Routing with IPv6
<6>[ 10.368350] In-situ OAM (IOAM) with IPv6
<6>[ 10.368429] NET: Registered PF_PACKET protocol family
<5>[ 10.368641] Key type dns_resolver registered
<4>[ 10.379846] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 10.381320] microcode: Current revision: 0x0000001c
<6>[ 10.383317] IPI shorthand broadcast: enabled
<6>[ 10.402868] sched_clock: Marking stable (10394000576, 8739293)->(10493137949, -90398080)
<6>[ 10.404524] registered taskstats version 1
<5>[ 10.409814] Loading compiled-in X.509 certificates
<6>[ 10.439214] Demotion targets for Node 0: null
<6>[ 10.439562] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930)
<6>[ 10.439574] kmemleak: Automatic memory scanning thread started
<5>[ 10.439806] Key type .fscrypt registered
<5>[ 10.439811] Key type fscrypt-provisioning registered
<6>[ 10.443170] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 10.443338] Key type trusted registered
<5>[ 10.448139] Key type encrypted registered
<6>[ 10.448149] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 10.448323] Loading compiled-in module X.509 certificates
<5>[ 10.448985] Loaded X.509 cert 'Build time autogenerated kernel key: 892ede694f23962e65cedb3485735ad5ef51243e'
<6>[ 10.448997] ima: Allocated hash algorithm: sha256
<6>[ 10.490061] ima: No architecture policies found
<6>[ 10.490201] evm: Initialising EVM extended attributes:
<6>[ 10.490207] evm: security.selinux
<6>[ 10.490211] evm: security.SMACK64
<6>[ 10.490215] evm: security.SMACK64EXEC
<6>[ 10.490220] evm: security.SMACK64TRANSMUTE
<6>[ 10.490224] evm: security.SMACK64MMAP
<6>[ 10.490228] evm: security.apparmor
<6>[ 10.490232] evm: security.ima
<6>[ 10.490235] evm: security.capability
<6>[ 10.490239] evm: HMAC attrs: 0x1
<6>[ 10.492673] PM: Magic number: 0:549:745
<6>[ 10.492940] printk: legacy console [netcon0] enabled
<6>[ 10.492947] netconsole: network logging started
<6>[ 10.493496] RAS: Correctable Errors collector initialized.
<6>[ 10.493672] clk: Disabling unused clocks
<6>[ 10.493683] PM: genpd: Disabling unused power domains
<6>[ 10.494372] md: Waiting for all devices to be available before autodetect
<6>[ 10.494380] md: If you don't use raid, use raid=noautodetect
<6>[ 10.494386] md: Autodetecting RAID arrays.
<6>[ 10.494394] md: autorun ...
<6>[ 10.494397] md: ... autorun DONE.
<6>[ 10.556066] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[ 10.569561] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
<6>[ 10.569592] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6>[ 10.569605] usb 4-1: Product: USB 10/100/1000 LAN
<6>[ 10.569615] usb 4-1: Manufacturer: Realtek
<6>[ 10.569624] usb 4-1: SerialNumber: 000001
<6>[ 10.569836] EXT4-fs (nvme0n1p2): mounted filesystem 4a8fe259-dcec-4db4-bec7-2db0bae78aa4 ro with ordered data mode. Quota mode: none.
<6>[ 10.569905] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 10.570770] devtmpfs: mounted
<6>[ 10.580924] Freeing unused decrypted memory: 2028K
<6>[ 10.582095] Freeing unused kernel image (initmem) memory: 5576K
<6>[ 10.582123] Write protecting the kernel read-only data: 34816k
<6>[ 10.583717] Freeing unused kernel image (rodata/data gap) memory: 1112K
<6>[ 10.589323] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 10.589357] Run /sbin/init as init process
<7>[ 10.589361] with arguments:
<7>[ 10.589362] /sbin/init
<7>[ 10.589363] with environment:
<7>[ 10.589364] HOME=/
<7>[ 10.589365] TERM=linux
<7>[ 10.589366] BOOT_IMAGE=/boot/drm_intel
<3>[ 10.653698] systemd[1]: Failed to find module 'autofs4'
<7>[ 10.681919] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 10.681963] systemd[1]: Detected architecture x86-64.
<7>[ 10.683850] systemd[1]: Hostname set to <shard-mtlp-2>.
<7>[ 10.841732] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 10.842487] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 10.935811] systemd[1]: Queued start job for default target graphical.target.
<7>[ 10.973407] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 10.975225] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 10.976745] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 10.977013] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 10.977182] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
<7>[ 10.977300] systemd[1]: Expecting device dev-disk-by\x2duuid-2FAB\x2dA020.device - /dev/disk/by-uuid/2FAB-A020...
<7>[ 10.977385] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 10.977475] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 10.977549] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 10.977627] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 10.977706] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 10.977996] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 10.978406] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 10.978719] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 10.979062] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 10.979360] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 10.979625] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 10.979967] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 10.980329] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 10.980638] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 10.980888] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 10.981206] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 10.981498] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 10.985835] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 10.988678] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 10.991655] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 10.994813] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 11.004243] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 11.007773] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 11.010559] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 11.013513] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 11.017324] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 11.020297] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 11.022524] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 11.025583] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 11.028903] systemd-journald[308]: Collecting audit messages is disabled.
<7>[ 11.031618] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 11.037722] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<6>[ 11.039170] pstore: Using crash dump compression: deflate
<6>[ 11.042205] pstore: Registered efi_pstore as persistent store backend
<7>[ 11.042585] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 11.042760] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 11.045835] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 11.050509] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 11.050651] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 11.050846] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 11.052899] fuse: init (API version 7.41)
<7>[ 11.055061] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 11.059714] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 11.200648] EXT4-fs (nvme0n1p2): re-mounted 4a8fe259-dcec-4db4-bec7-2db0bae78aa4 r/w. Quota mode: none.
<6>[ 11.233988] Adding 8388604k swap on /swap.img. Priority:-2 extents:53 across:639401980k SS
<7>[ 11.248839] systemd-journald[308]: Received client request to flush runtime journal.
<7>[ 11.273984] systemd-journald[308]: /var/log/journal/77d792ab1420413faf79e7f4d9405adb/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 11.273997] systemd-journald[308]: Rotating system journal.
<6>[ 12.159256] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 12.186780] Consider using thermal netlink events interface
<4>[ 12.190272] int3472-discrete INT3472:02: reset \_SB.GPI0 pin number mismatch _DSM 0 resource 160
<4>[ 12.193087] int3472-discrete INT3472:02: power-enable \_SB.GPI0 pin number mismatch _DSM 17 resource 113
<6>[ 12.220175] input: Intel HID events as /devices/platform/INTC1077:00/input/input3
<6>[ 12.236322] intel-hid INTC1077:00: platform supports 5 button array
<6>[ 12.248435] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4
<6>[ 12.265749] pci 0000:00:08.0: Setting to D3hot
<6>[ 12.278061] pci 0000:00:05.0: Setting to D3hot
<6>[ 12.290259] pci 0000:00:0b.0: Setting to D3hot
<6>[ 12.301838] pci 0000:00:14.2: enabling device (0000 -> 0002)
<3>[ 12.348128] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121
<3>[ 12.354715] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121
<6>[ 12.459146] ACPI: bus type thunderbolt registered
<4>[ 12.459608] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff]
<4>[ 12.459627] caller igen6_probe+0x198/0x920 [igen6_edac] mapping multiple BARs
<6>[ 12.461184] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 12.461187] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<4>[ 12.464602] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 12.465255] intel_pmc_core INT33A1:00: initialized
<6>[ 12.465504] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 12.467389] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT)
<6>[ 12.473275] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 12.478879] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 12.485698] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT)
<7>[ 12.485843] EDAC igen6 MC1: HANDLING IBECC MEMORY ERROR
<7>[ 12.485851] EDAC igen6 MC1: ADDR 0x7fffffffe0
<7>[ 12.485854] EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR
<7>[ 12.485856] EDAC igen6 MC0: ADDR 0x7fffffffe0
<6>[ 12.491905] EDAC igen6: v2.5.1
<6>[ 12.498198] i801_smbus 0000:00:1f.4: SPD Write Disable is set
<6>[ 12.498345] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
<6>[ 12.512289] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 12.555476] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 12.571296] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
<6>[ 12.571302] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 12.571303] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 12.571304] RAPL PMU: hw unit of domain psys 2^-14 Joules
<5>[ 12.633930] audit: type=1400 audit(1732729428.787:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=571 comm="apparmor_parser"
<5>[ 12.634502] audit: type=1400 audit(1732729428.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=572 comm="apparmor_parser"
<5>[ 12.635066] audit: type=1400 audit(1732729428.788:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=570 comm="apparmor_parser"
<5>[ 12.635456] audit: type=1400 audit(1732729428.788:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=573 comm="apparmor_parser"
<5>[ 12.635866] audit: type=1400 audit(1732729428.789:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=575 comm="apparmor_parser"
<5>[ 12.636173] audit: type=1400 audit(1732729428.789:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=576 comm="apparmor_parser"
<5>[ 12.638266] audit: type=1400 audit(1732729428.791:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=577 comm="apparmor_parser"
<5>[ 12.640130] audit: type=1400 audit(1732729428.793:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=578 comm="apparmor_parser"
<5>[ 12.640643] audit: type=1400 audit(1732729428.793:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=579 comm="apparmor_parser"
<5>[ 12.643789] audit: type=1400 audit(1732729428.797:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=580 comm="apparmor_parser"
<6>[ 12.670651] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 12.765495] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
<6>[ 12.765505] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
<6>[ 12.765608] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 12.890757] intel_rapl_msr: PL4 support detected.
<6>[ 12.891839] intel_rapl_common: Found RAPL domain package
<6>[ 12.891845] intel_rapl_common: Found RAPL domain core
<6>[ 12.891849] intel_rapl_common: Found RAPL domain psys
<4>[ 13.109239] block nvme0n1: No UUID available providing old NGUID
<6>[ 13.422062] cryptd: max_cpu_qlen set to 1000
<6>[ 13.426501] usbcore: registered new device driver r8152-cfgselector
<6>[ 13.430134] loop0: detected capacity change from 0 to 8
<6>[ 13.448189] AES CTR mode by8 optimization enabled
<6>[ 13.450703] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 13.466981] e1000e 0000:00:1f.6 eno0: renamed from eth0
<6>[ 13.473573] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002)
<6>[ 13.478129] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9
<6>[ 13.478138] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 13.497285] intel_rapl_common: Found RAPL domain package
<6>[ 13.506137] hid: raw HID events driver (C) Jiri Kosina
<6>[ 13.522225] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<5>[ 13.543738] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 13.543777] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 13.594413] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.596282] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.597987] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.599237] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.601572] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 13.602273] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 13.618386] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.623323] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.629294] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.629832] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
<6>[ 13.632135] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 13.635098] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 13.641387] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 13.646526] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 13.856449] r8152 4-1:1.0 eth0: v1.12.13
<6>[ 13.856637] usbcore: registered new interface driver r8152
<6>[ 13.860206] usbcore: registered new interface driver cdc_ether
<6>[ 13.861550] usbcore: registered new interface driver r8153_ecm
<6>[ 13.884698] r8152 4-1:1.0 enxe2015072f492: renamed from eth0
<6>[ 16.633650] r8152 4-1:1.0 enxe2015072f492: carrier on
<3>[ 29.676849] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
<7>[ 32.557473] systemd-journald[308]: /var/log/journal/77d792ab1420413faf79e7f4d9405adb/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 48.995078] [IGT] i915_module_load: executing
<7>[ 49.003603] [IGT] i915_module_load: starting subtest load
<4>[ 49.434014] **********************************************************
<4>[ 49.434015] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 49.434015] ** **
<4>[ 49.434016] ** trace_printk() being used. Allocating extra memory. **
<4>[ 49.434017] ** **
<4>[ 49.434018] ** This means that this is a DEBUG kernel and it is **
<4>[ 49.434018] ** unsafe for production use. **
<4>[ 49.434019] ** **
<4>[ 49.434020] ** If you see this message and you are not debugging **
<4>[ 49.434021] ** the kernel, report this immediately to your vendor! **
<4>[ 49.434022] ** **
<4>[ 49.434022] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 49.434023] **********************************************************
<6>[ 49.478388] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0
<7>[ 49.479411] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 49.479655] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)
<7>[ 49.479821] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0
<7>[ 49.479998] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7>[ 49.480138] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT
<7>[ 49.480266] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K
<7>[ 49.480445] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7>[ 49.480662] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing
<7>[ 49.480815] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz
<7>[ 49.481361] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000
<7>[ 49.481470] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000
<7>[ 49.481909] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005
<7>[ 49.482009] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001
<7>[ 49.482383] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access
<7>[ 49.482590] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7>[ 49.482690] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M
<7>[ 49.482807] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M
<6>[ 49.482904] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6>[ 49.483226] i915 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 49.483530] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7>[ 49.483539] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access
<7>[ 49.483683] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947
<7>[ 49.484148] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K
<7>[ 49.484368] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31514 MiB [mem 0x00000000-0x7b1a52fff], io: n/a
<7>[ 49.484469] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff]
<7>[ 49.484769] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018
<7>[ 49.484934] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0
<7>[ 49.485069] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7>[ 49.485200] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7>[ 49.485328] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7>[ 49.485453] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present
<7>[ 49.485596] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 49.485726] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num qgv points 4
<7>[ 49.485848] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8
<7>[ 49.485948] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Watermark level 0 adjustment needed: yes
<7>[ 49.486051] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200
<7>[ 49.486205] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112
<7>[ 49.486351] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136
<7>[ 49.486494] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344
<7>[ 49.486629] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200
<7>[ 49.486768] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.486903] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.487034] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.487164] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200
<7>[ 49.487292] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.487422] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.487551] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.487678] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 49.487813] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.487939] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.488065] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.488193] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 49.488319] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.488445] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.488573] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.488699] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 49.488832] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.488959] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.489085] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.489210] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200
<7>[ 49.489334] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000
<7>[ 49.489460] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 49.489586] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600
<7>[ 49.490362] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7>[ 49.490497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253
<7>[ 49.490627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7>[ 49.490766] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)
<7>[ 49.490896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7>[ 49.491027] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7>[ 49.491157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848)
<7>[ 49.491287] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7>[ 49.491411] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7>[ 49.491544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7>[ 49.491672] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 49.491810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7>[ 49.491936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136)
<7>[ 49.492062] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7>[ 49.492189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7>[ 49.492310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 49.492433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7>[ 49.492559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7>[ 49.492687] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7>[ 49.492824] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 49.492953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2
<7>[ 49.493079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 49.493206] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6
<7>[ 49.493334] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7>[ 49.493461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 49.493585] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 49.493710] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 49.493848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 49.493973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 49.494096] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 49.494225] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7>[ 49.494376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 49.494564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7>[ 49.494734] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 49.494976] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7>[ 49.495203] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7>[ 49.495363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7>[ 49.495495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7>[ 49.495625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7>[ 49.495808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<6>[ 49.495948] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
<7>[ 49.495964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7>[ 49.496112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7>[ 49.496247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7>[ 49.496382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7>[ 49.496608] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin
<7>[ 49.497609] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7>[ 49.498901] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us
<7>[ 49.499054] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 49.499189] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 91 (91.0 usec)
<7>[ 49.499321] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 92 (92.0 usec)
<7>[ 49.499451] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec)
<7>[ 49.499579] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 108 (108.0 usec)
<7>[ 49.499712] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec)
<7>[ 49.500804] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:
<7>[ 49.500954] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 49.501090] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 49.501220] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP)
<7>[ 49.501349] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7>[ 49.501475] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP)
<7>[ 49.501612] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1:
<7>[ 49.501743] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0
<7>[ 49.501945] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 49.502113] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP)
<7>[ 49.502290] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 49.502458] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP)
<7>[ 49.502625] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 49.502814] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP)
<7>[ 49.502987] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 49.503129] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP)
<7>[ 49.503322] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2:
<7>[ 49.503475] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0
<7>[ 49.503648] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7>[ 49.503901] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP)
<7>[ 49.504056] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7>[ 49.504184] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP)
<7>[ 49.504355] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 49.504525] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP)
<7>[ 49.504678] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 49.504867] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP)
<7>[ 49.505034] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3:
<7>[ 49.505219] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0
<7>[ 49.505425] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 49.505587] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP)
<7>[ 49.505763] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 49.505907] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP)
<7>[ 49.506016] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.
<7>[ 49.506130] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4:
<7>[ 49.506304] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0
<7>[ 49.506481] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7>[ 49.506667] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP)
<7>[ 49.506862] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 49.507038] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP)
<7>[ 49.509469] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 49.509630] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7>[ 49.509793] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz
<7>[ 49.510146] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:240:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 49.510403] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:240:DDI A/PHY A]
<7>[ 49.510615] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7>[ 49.510788] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7>[ 49.510939] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7>[ 49.511104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 49.511250] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7>[ 49.511394] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 49.511538] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7>[ 49.511680] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 49.511844] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 49.512024] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:240:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 49.512445] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 49.512599] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 49.512755] i915 0000:00:02.0: [drm:pps_init_delays [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 49.512902] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 49.513046] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 49.513642] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 49.514330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<6>[ 49.516051] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
<7>[ 49.516021] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 49.516371] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 49.518760] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 49.519513] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7>[ 49.520670] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85
<7>[ 49.522528] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3
<7>[ 49.523261] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported
<7>[ 49.524911] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.531482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.531493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.531496] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.531545] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:241:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.532285] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:241:eDP-1] Performing OUI wait (0 ms)
<7>[ 49.533018] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:241:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 49.533173] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:241:eDP-1] DRRS type: none
<7>[ 49.533395] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:241:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 49.533565] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:241:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 49.533755] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 49.533891] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 49.534032] i915 0000:00:02.0: [drm:pps_init_delays [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 49.534180] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 49.534324] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7>[ 49.534585] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 49.534893] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:249:DDI B/PHY B] Using AUX CH B (VBT)
<7>[ 49.535056] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:249:DDI B/PHY B]
<7>[ 49.535462] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:249:DDI B/PHY B]
<7>[ 49.535590] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:249:DDI B/PHY B] Using DDC pin 0x2 (VBT)
<7>[ 49.535919] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:267:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 49.536240] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 49.536469] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 49.536763] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 49.536978] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected)
<7>[ 49.537249] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 49.537391] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 49.537518] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:276:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT)
<7>[ 49.537712] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:280:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 49.537939] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 49.538166] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 49.538443] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:289:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)
<7>[ 49.538638] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)
<7>[ 49.538853] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 49.539610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 49.539970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 49.540274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 49.540536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:238:pipe D] hw state readout: disabled
<7>[ 49.540675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 49.540828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 49.540976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 49.541134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 49.541280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 49.541410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 49.541538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 49.541668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 49.541821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 49.541961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 49.542109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 49.542255] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 49.542394] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 49.542523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 49.542651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 49.542796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 49.542929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 49.543060] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 49.543193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] hw state readout: disabled, pipe D
<7>[ 49.543327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] hw state readout: disabled, pipe D
<7>[ 49.543457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] hw state readout: disabled, pipe D
<7>[ 49.543585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] hw state readout: disabled, pipe D
<7>[ 49.543714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] hw state readout: disabled, pipe D
<7>[ 49.543862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] hw state readout: disabled, pipe D
<7>[ 49.544626] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 49.544817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 49.544954] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DDI B/PHY B] hw state readout: disabled, pipe A
<7>[ 49.545091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:251:DP-MST A] hw state readout: disabled, pipe A
<7>[ 49.545228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:252:DP-MST B] hw state readout: disabled, pipe B
<7>[ 49.545347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:253:DP-MST C] hw state readout: disabled, pipe C
<7>[ 49.545466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DP-MST D] hw state readout: disabled, pipe D
<7>[ 49.545654] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 49.545799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 49.545931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:269:DP-MST A] hw state readout: disabled, pipe A
<7>[ 49.546064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:270:DP-MST B] hw state readout: disabled, pipe B
<7>[ 49.546197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DP-MST C] hw state readout: disabled, pipe C
<7>[ 49.546322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:272:DP-MST D] hw state readout: disabled, pipe D
<7>[ 49.546481] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 49.546606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 49.546736] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 49.546908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 49.547027] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:282:DP-MST A] hw state readout: disabled, pipe A
<7>[ 49.547146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:283:DP-MST B] hw state readout: disabled, pipe B
<7>[ 49.547266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DP-MST C] hw state readout: disabled, pipe C
<7>[ 49.547385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:285:DP-MST D] hw state readout: disabled, pipe D
<7>[ 49.547515] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected)
<7>[ 49.547642] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DDI TC4/PHY TC4] hw state readout: disabled, pipe A
<7>[ 49.547779] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:291:DP-MST A] hw state readout: disabled, pipe A
<7>[ 49.547908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DP-MST B] hw state readout: disabled, pipe B
<7>[ 49.548042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:293:DP-MST C] hw state readout: disabled, pipe C
<7>[ 49.548177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST D] hw state readout: disabled, pipe D
<7>[ 49.548402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:241:eDP-1] hw state readout: enabled
<7>[ 49.548539] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:250:DP-1] hw state readout: disabled
<7>[ 49.548672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:262:HDMI-A-1] hw state readout: disabled
<7>[ 49.548823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:268:DP-2] hw state readout: disabled
<7>[ 49.548956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:277:HDMI-A-2] hw state readout: disabled
<7>[ 49.549090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:281:DP-3] hw state readout: disabled
<7>[ 49.549224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:290:DP-4] hw state readout: disabled
<7>[ 49.549411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:32:plane 1A] min_cdclk 256910 kHz
<7>[ 49.549537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 49.549661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 49.549796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 49.549928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 49.550062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 49.550198] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1
<7>[ 49.550359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 49.550480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 49.550600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 49.550718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 49.550857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 49.550994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 49.551126] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7>[ 49.551279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 49.551406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 49.551529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 49.551651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 49.551783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 49.551911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 49.552040] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0
<7>[ 49.552193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:188:plane 1D] min_cdclk 0 kHz
<7>[ 49.552321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:197:plane 2D] min_cdclk 0 kHz
<7>[ 49.552447] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:206:plane 3D] min_cdclk 0 kHz
<7>[ 49.552568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:215:plane 4D] min_cdclk 0 kHz
<7>[ 49.552689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:224:plane 5D] min_cdclk 0 kHz
<7>[ 49.552828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:233:cursor D] min_cdclk 0 kHz
<7>[ 49.552961] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0
<7>[ 49.553300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 49.553439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 49.553573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 49.553703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 49.553842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 49.553984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 49.554124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 49.554265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64
<7>[ 49.554393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 49.554520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 49.554645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 49.554786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 49.554921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0
<7>[ 49.555049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 49.555177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0
<7>[ 49.555304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 49.555429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 49.555556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 49.555682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 49.555871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 49.556002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 49.556131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 49.556257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 49.556385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 49.556510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 49.556636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 49.556807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 49.556936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 49.557063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 49.557197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.557322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.557444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.557568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 49.557691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 49.557834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.557969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.558097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.558230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 49.558364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 49.558492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 49.558617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:238:pipe D] enable: no [setup_hw_state]
<7>[ 49.558957] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 49.559098] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 49.559234] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 49.559365] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:238:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 49.560015] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 49.560146] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming
<7>[ 49.560289] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000
<7>[ 49.560798] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000)
<7>[ 49.566369] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K)
<7>[ 49.572927] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K)
<7>[ 49.573060] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000]
<7>[ 49.573175] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.
<7>[ 49.573283] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0
<7>[ 49.573401] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0
<7>[ 49.573514] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0
<7>[ 49.573634] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global
<7>[ 49.576057] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0
<7>[ 49.576190] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0
<7>[ 49.576313] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0
<7>[ 49.577061] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0
<7>[ 49.577188] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0
<7>[ 49.577546] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0
<7>[ 49.577666] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0
<7>[ 49.578802] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 49.578965] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs.
<7>[ 49.579122] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset
<7>[ 49.595774] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f
<7>[ 49.595938] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410000
<7>[ 49.596066] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7>[ 49.596191] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7>[ 49.596312] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92
<7>[ 49.596433] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008
<7>[ 49.596555] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7>[ 49.596675] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7>[ 49.596831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7>[ 49.596955] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7>[ 49.597076] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7>[ 49.597196] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7>[ 49.597315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7>[ 49.597435] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<6>[ 49.598378] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<7>[ 49.607798] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 2100MHz, before = 1700MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 49.608801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6>[ 49.610215] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6>[ 49.610217] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6>[ 49.610659] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7>[ 49.617851] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0
<7>[ 49.618005] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global
<7>[ 49.619121] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0
<7>[ 49.619265] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0
<7>[ 49.619881] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2
<7>[ 49.620010] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2
<7>[ 49.620514] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0
<7>[ 49.620634] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0
<7>[ 49.621183] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6
<7>[ 49.621308] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6
<7>[ 49.623152] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7>[ 49.623326] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs.
<7>[ 49.623475] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset
<7>[ 49.641437] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f
<7>[ 49.641591] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000
<7>[ 49.641719] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4
<7>[ 49.641860] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3
<7>[ 49.641983] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc
<7>[ 49.642106] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008
<7>[ 49.642230] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0
<7>[ 49.642351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0
<7>[ 49.642472] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0
<7>[ 49.642591] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0
<7>[ 49.642710] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0
<7>[ 49.642847] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0
<7>[ 49.642966] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0
<7>[ 49.643085] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0
<7>[ 49.643205] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no
<7>[ 49.645334] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound
<6>[ 49.645488] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915])
<6>[ 49.645870] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.36.0
<6>[ 49.645873] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4
<7>[ 49.660030] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz, before = 1250MHz, status = 0x8002F034, count = 0, ret = 0
<7>[ 49.660654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled
<7>[ 49.670394] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 9ms, freq = 1300MHz, before = 1300MHz, status = 0x0000C1DC, count = 0, ret = 0
<6>[ 49.670858] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media
<6>[ 49.671801] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled
<6>[ 49.671807] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled
<6>[ 49.672114] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled
<7>[ 49.679119] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0
<7>[ 49.679241] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0
<7>[ 49.679346] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0
<7>[ 49.679447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1
<7>[ 49.679544] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0
<7>[ 49.679640] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0
<7>[ 49.679736] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0
<6>[ 49.681081] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
<7>[ 49.682193] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 49.682341] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 49.682556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 49.682687] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 49.682858] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001
<7>[ 49.682984] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7>[ 49.683108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm
<7>[ 49.683231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 49.683357] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0
<7>[ 49.683481] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0
<7>[ 49.683610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7>[ 49.683769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 49.683911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 49.684050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7>[ 49.684185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7>[ 49.684318] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz)
<7>[ 49.686406] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x1341b072)
<7>[ 49.686766] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 49.686908] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 49.687039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 49.687172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 49.687302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 49.687434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 49.687563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 49.687688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 49.687844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 49.687970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 49.688094] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 49.688219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 49.688343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 49.688466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 49.688587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 49.688710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 49.688893] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 49.689013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 49.689131] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 49.689251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 49.689372] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 49.689490] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 49.689715] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1
<7>[ 49.689904] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 49.690083] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 49.690228] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7>[ 49.697897] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x1341b072)
<7>[ 49.705004] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:241:eDP-1] adding connector to sysfs
<7>[ 49.707533] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:241:eDP-1] backlight device intel_backlight registered
<7>[ 49.707933] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 49.709241] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:241:eDP-1] generating connector hotplug event
<7>[ 49.709316] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:250:DP-1] adding connector to sysfs
<7>[ 49.709711] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1
<7>[ 49.710402] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:250:DP-1] generating connector hotplug event
<7>[ 49.710436] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:262:HDMI-A-1] adding connector to sysfs
<7>[ 49.710707] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:262:HDMI-A-1] generating connector hotplug event
<7>[ 49.710738] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:268:DP-2] adding connector to sysfs
<7>[ 49.711062] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2
<7>[ 49.711641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:268:DP-2] generating connector hotplug event
<7>[ 49.711674] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:277:HDMI-A-2] adding connector to sysfs
<7>[ 49.711919] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:277:HDMI-A-2] generating connector hotplug event
<7>[ 49.711950] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:281:DP-3] adding connector to sysfs
<7>[ 49.712244] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 49.712898] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:281:DP-3] generating connector hotplug event
<7>[ 49.712934] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:290:DP-4] adding connector to sysfs
<7>[ 49.713262] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4
<7>[ 49.713834] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:290:DP-4] generating connector hotplug event
<6>[ 49.713859] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0
<7>[ 49.715713] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected
<6>[ 49.731237] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 49.735683] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 49.736606] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 49.736791] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7>[ 49.737849] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:32:plane 1A]
<7>[ 49.738004] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 49.738145] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 49.738280] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 49.738412] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:32:plane 1A] for BIOS fb
<7>[ 49.738542] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe A] area: 2880x1800, bpp: 32, size: 20736000
<7>[ 49.738672] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:32:plane 1A] (20738048 >= 20736000)
<7>[ 49.738833] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:134:pipe B] not active, skipping
<7>[ 49.738968] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:186:pipe C] not active, skipping
<7>[ 49.739092] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:238:pipe D] not active, skipping
<7>[ 49.739218] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console
<7>[ 49.739364] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 49.739994] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.742343] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 49.744840] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:250:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.745002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.749781] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:262:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.749927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.750324] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.750538] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:268:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.750678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.751003] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 49.755834] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:277:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.755979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.756212] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.756412] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:281:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.756546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.756839] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 49.757049] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:290:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 49.757192] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 49.757300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 49.757422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 49.759451] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.760572] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 49.760955] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 49.761274] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 49.761715] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 49.761720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 49.761723] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 49.761754] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 49.761888] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 49.762792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 49.762938] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 49.764460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] status updated from unknown to connected
<7>[ 49.764653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 49.764663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.764672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 49.764680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 49.765065] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 49.769789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 49.769823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.769838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 49.774805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 49.774815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 49.774823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 49.775166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 49.775176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.775184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 49.779835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 49.779845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 49.779853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 49.780097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 49.780105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 49.780113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 49.780347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 49.780355] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 49.780358] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 49.780361] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 49.780363] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 49.780366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 49.780368] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 49.780370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 49.780453] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 49.780464] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for cmdline mode
<7>[ 49.780467] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for preferred mode, tile 0
<7>[ 49.780470] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] Found mode 2880x1800
<7>[ 49.780472] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 49.780483] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 49.780509] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 49.780546] i915 0000:00:02.0: [drm:intelfb_create [i915]] re-using BIOS fb
<7>[ 49.780771] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x03100000
<6>[ 49.781658] fbcon: i915drmfb (fb0) is primary device
<7>[ 49.782441] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:241:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 49.782668] i915 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [i915]] [ENCODER:240:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 49.782872] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000
<7>[ 49.783022] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 49.783170] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:240:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 49.783316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288)
<7>[ 49.783466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 49.783607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7>[ 49.783758] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no,
<7>[ 49.783904] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1.
<7>[ 49.784045] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 49.784181] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 49.784317] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 49.784451] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 49.784581] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 49.784709] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 49.784886] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 49.785015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7>[ 49.785160] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes,
<7>[ 49.785290] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1,
<7>[ 49.785418] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0.
<7>[ 49.785545] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] c10pll_rawhw_state:
<7>[ 49.785672] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21
<7>[ 49.785819] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 49.785947] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 49.786074] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 49.786201] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7>[ 49.786336] i915 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 49.786466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 49.786609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000)
<7>[ 49.786759] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 49.786949] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 49.787091] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7>[ 49.787229] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7>[ 49.787364] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:32:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7>[ 49.787493] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 49.787621] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.787762] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.787890] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788018] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 49.788147] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788279] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 49.788659] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788805] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.788930] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 49.789188] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789315] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789440] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789564] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 49.789689] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789822] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.789945] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 49.790119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 49.790270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 49.790411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 49.790548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7>[ 49.790683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 49.790830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7>[ 49.790966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7>[ 49.791099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7>[ 49.791230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 49.791360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7>[ 49.791488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7>[ 49.791616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 49.791751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0
<7>[ 49.791881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 49.792012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7>[ 49.792143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7>[ 49.792271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7>[ 49.792400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7>[ 49.792527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7>[ 49.792655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7>[ 49.792793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0
<7>[ 49.792921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.793049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 49.793179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 49.793308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7>[ 49.793436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa
<7>[ 49.793562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820
<7>[ 49.793688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7>[ 49.793822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 49.793951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 49.794078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7>[ 49.794206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 49.794335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 49.794465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 49.794590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 49.794715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.794854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.794983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.795109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 49.795234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 49.795363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.795490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.795616] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 49.795740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 49.795878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:32:plane 1A] fb: [FB:299] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 49.796012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 49.796140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 49.796267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 49.796393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 49.796520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 49.796649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 49.796783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 49.798090] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<6>[ 49.822217] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)
<7>[ 49.842692] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz, before = 1300MHz, status = 0x00116C68, count = 0, ret = 0
<6>[ 49.843227] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads
<7>[ 50.002925] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 0
<7>[ 50.003901] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7>[ 50.010972] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 50.010970] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7>[ 50.011432] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 50.011538] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - short
<7>[ 50.011890] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 50.061706] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 50.062641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7>[ 50.062642] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 50.063911] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 50.064019] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:32:plane 1A]
<7>[ 50.064452] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 50.064771] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x2000071 0x13421c72)
<7>[ 50.064955] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 50.065272] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:240:DDI A/PHY A]
<7>[ 50.065716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DDI B/PHY B]
<7>[ 50.066161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:251:DP-MST A]
<7>[ 50.066450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:252:DP-MST B]
<7>[ 50.066763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:253:DP-MST C]
<7>[ 50.066809] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 50.067108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:254:DP-MST D]
<7>[ 50.067387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI TC1/PHY TC1]
<7>[ 50.067662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:269:DP-MST A]
<7>[ 50.067986] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:270:DP-MST B]
<7>[ 50.068261] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DP-MST C]
<7>[ 50.068400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:272:DP-MST D]
<7>[ 50.068531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI TC2/PHY TC2]
<7>[ 50.068665] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DDI TC3/PHY TC3]
<7>[ 50.068811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:282:DP-MST A]
<7>[ 50.068944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:283:DP-MST B]
<7>[ 50.069078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DP-MST C]
<7>[ 50.069212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:285:DP-MST D]
<7>[ 50.069346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DDI TC4/PHY TC4]
<7>[ 50.069478] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DP-MST A]
<7>[ 50.069609] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DP-MST B]
<7>[ 50.069736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:293:DP-MST C]
<7>[ 50.069878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST D]
<7>[ 50.070037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7>[ 50.071538] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 50.071692] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 50.308052] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized
<7>[ 50.683153] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 50.683669] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 50.684280] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 50.684849] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 50.716840] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7>[ 50.717386] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:240:DDI A/PHY A] - long
<7>[ 50.717896] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 50.718481] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:240:DDI A/PHY A]
<7>[ 50.812052] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.812052] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.812076] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 50.812054] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 50.884586] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7>[ 50.887474] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.887886] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 50.891557] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7>[ 50.892434] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 50.893365] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7>[ 50.894384] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 50.895101] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 50.896348] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 50.896478] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7>[ 50.898372] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 50.898499] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:241:eDP-1][ENCODER:240:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7>[ 50.899120] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7>[ 50.899375] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7>[ 50.899511] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7>[ 50.899701] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:241:eDP-1] set backlight PWM = 192000
<7>[ 50.910549] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7>[ 50.912434] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:241:eDP-1]
<7>[ 50.912656] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe A]
<7>[ 50.913966] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 50.915908] Console: switching to colour frame buffer device 180x56
<6>[ 50.923604] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
<7>[ 50.942860] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14
<7>[ 50.943003] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 50.943042] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 50.943014] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0
<7>[ 50.943158] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no
<7>[ 50.943295] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes
<7>[ 50.943431] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes
<7>[ 50.943562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 50.943563] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes
<7>[ 50.943698] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes
<7>[ 50.943625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 50.943842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes
<7>[ 50.943973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes
<7>[ 50.944104] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no
<7>[ 50.944251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes
<7>[ 50.944394] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no
<7>[ 50.944533] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes
<7>[ 50.944690] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no
<7>[ 50.944864] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes
<7>[ 50.945006] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no
<7>[ 50.945137] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no
<7>[ 50.945269] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no
<7>[ 50.945398] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes
<7>[ 50.945529] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes
<7>[ 50.945664] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes
<7>[ 50.945824] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz
<7>[ 50.945955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7>[ 50.945885] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.946521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7>[ 50.946736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7>[ 50.947186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7>[ 50.947844] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device
<7>[ 50.948010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12
<7>[ 50.948111] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71
<7>[ 50.948210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13
<7>[ 50.948307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0
<7>[ 50.948402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0
<7>[ 50.948249] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 50.948496] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0
<7>[ 50.948588] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41
<7>[ 50.948681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000
<7>[ 50.948784] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE
<7>[ 50.948728] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 50.948874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48
<7>[ 50.948964] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2
<7>[ 50.948963] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 50.949054] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46
<7>[ 50.949145] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no
<7>[ 50.949196] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 50.949201] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 50.949204] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 50.949243] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no
<7>[ 50.949226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 50.949338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no
<7>[ 50.949379] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 50.949432] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes
<7>[ 50.949527] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no
<7>[ 50.949624] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no
<7>[ 50.949727] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes
<7>[ 50.949862] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes
<7>[ 50.949959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no
<7>[ 50.950056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes
<7>[ 50.950149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes
<7>[ 50.950240] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes
<7>[ 50.950337] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no
<7>[ 50.950438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no
<7>[ 50.950538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes
<7>[ 50.950638] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes
<7>[ 50.950738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no
<7>[ 50.950944] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no
<7>[ 50.951046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no
<7>[ 50.951150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes
<7>[ 50.951122] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.951251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes
<7>[ 50.951299] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 50.951348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no
<7>[ 50.951438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no
<7>[ 50.951525] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes
<7>[ 50.951620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes
<7>[ 50.951720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes
<7>[ 50.951888] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no
<7>[ 50.951988] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes
<7>[ 50.952087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes
<7>[ 50.952179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no
<7>[ 50.952271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes
<7>[ 50.952373] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes
<7>[ 50.952466] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes
<7>[ 50.952559] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no
<7>[ 50.952661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no
<7>[ 50.952780] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no
<7>[ 50.952874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no
<7>[ 50.952957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 50.952975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.952984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 50.952963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no
<7>[ 50.952998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 50.953059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled
<7>[ 50.953158] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003
<7>[ 50.953246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 50.953338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff
<7>[ 50.953427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff
<7>[ 50.953519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 50.953604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 50.953691] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 50.953792] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 50.953893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<7>[ 50.953982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400
<7>[ 50.954069] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8
<7>[ 50.954157] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00
<7>[ 50.954244] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00
<7>[ 50.954330] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128
<7>[ 50.954417] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16
<7>[ 50.954505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no
<7>[ 50.954591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no
<7>[ 50.954676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no
<6>[ 50.954768] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6>[ 50.954768] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6>[ 50.954769] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7>[ 50.957779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 50.957793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.957802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.962797] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 50.962806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 50.962814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 50.963202] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.963422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 50.963431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 50.963439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 50.963705] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy)
<7>[ 50.968825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 50.968835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 50.968843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 50.969077] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.969285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 50.969293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 50.969301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 50.969513] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt)
<7>[ 50.969700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 50.969708] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 50.969712] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 50.969715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 50.969717] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 50.969719] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 50.969721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 50.969723] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 50.969943] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 50.969957] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for cmdline mode
<7>[ 50.969960] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for preferred mode, tile 0
<7>[ 50.969962] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] Found mode 2880x1800
<7>[ 50.969965] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 50.969984] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 50.977646] i915 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<7>[ 50.988467] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 50.988486] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 50.988704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1]
<7>[ 50.988725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:241:eDP-1]
<7>[ 50.989955] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.990724] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 50.990943] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7>[ 50.991073] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7>[ 50.991281] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7>[ 50.991285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD monitor
<7>[ 50.991287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:241:eDP-1] ELD size 20, SAD count 0
<7>[ 50.991307] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] VRR capable: no
<7>[ 50.991424] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 50.992295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 50.992437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:241:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 50.994034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:241:eDP-1] probed modes:
<7>[ 50.994049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7>[ 50.994058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1]
<7>[ 50.994067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:250:DP-1]
<7>[ 50.998765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:250:DP-1] disconnected
<7>[ 50.998776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1]
<7>[ 50.998783] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:262:HDMI-A-1]
<7>[ 51.003773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:262:HDMI-A-1] disconnected
<7>[ 51.003783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2]
<7>[ 51.003791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:DP-2]
<7>[ 51.004133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:268:DP-2] disconnected
<7>[ 51.004142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.004151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:277:HDMI-A-2]
<7>[ 51.008814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:277:HDMI-A-2] disconnected
<7>[ 51.008824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3]
<7>[ 51.008833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:281:DP-3]
<7>[ 51.009172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:281:DP-3] disconnected
<7>[ 51.009181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4]
<7>[ 51.009189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:290:DP-4]
<7>[ 51.009413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:290:DP-4] disconnected
<7>[ 51.009421] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] enabled? yes
<7>[ 51.009425] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:250:DP-1] enabled? no
<7>[ 51.009427] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:262:HDMI-A-1] enabled? no
<7>[ 51.009429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:DP-2] enabled? no
<7>[ 51.009431] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:HDMI-A-2] enabled? no
<7>[ 51.009433] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:281:DP-3] enabled? no
<7>[ 51.009435] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:290:DP-4] enabled? no
<7>[ 51.009517] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.009528] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for cmdline mode
<7>[ 51.009531] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] looking for preferred mode, tile 0
<7>[ 51.009533] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:241:eDP-1] Found mode 2880x1800
<7>[ 51.009535] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 51.009552] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.022032] i915 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 51.057323] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 51.059514] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7>[ 51.059712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7>[ 51.060050] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 51.060472] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 51.063556] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7>[ 51.078064] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000
<7>[ 51.078228] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:241:eDP-1] set backlight level = 13892
<7>[ 51.089655] i915 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 51.089910] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7>[ 51.091712] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7>[ 51.109594] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7>[ 51.109736] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7>[ 51.109954] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7>[ 51.110103] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7>[ 51.110242] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7>[ 51.110374] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7>[ 51.110494] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7>[ 51.110630] i915 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 51.110614] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7>[ 51.110713] [IGT] i915_module_load: finished subtest load, SUCCESS
<7>[ 51.110742] [IGT] i915_module_load: exiting, ret=0
<7>[ 51.110736] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7>[ 51.110881] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7>[ 51.111003] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7>[ 51.111123] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7>[ 51.111244] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7>[ 51.111361] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7>[ 51.111479] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7>[ 51.111597] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7>[ 51.111716] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7>[ 51.111848] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7>[ 51.111972] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7>[ 51.112099] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7>[ 51.112226] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7>[ 51.112342] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7>[ 51.112460] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7>[ 51.112578] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7>[ 51.112697] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7>[ 51.112833] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7>[ 51.112952] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7>[ 51.113070] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7>[ 51.113197] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7>[ 51.113314] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7>[ 51.113428] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7>[ 51.113544] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7>[ 51.113659] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7>[ 51.113787] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7>[ 51.113905] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7>[ 51.114024] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<6>[ 51.118830] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 51.119568] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 51.121200] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 51.121716] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 52.026942] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.026960] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.027110] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected)
<7>[ 52.027170] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.202611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7>[ 54.012096] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 54.012609] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:240:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7>[ 54.013017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7>[ 54.013583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7>[ 54.013869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7>[ 54.659883] i915 0000:00:02.0: [drm:fwtable_write32 [i915]] Unclaimed access detected before write to register 0x60910
<7>[ 55.075872] i915 0000:00:02.0: [drm:fwtable_write32 [i915]] Unclaimed access detected before write to register 0x60910