<5>[ 0.000000] Linux version 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Nov 18 21:35:20 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ede6fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ede7000-0x000000003ee1efff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee1f000-0x000000003ee27fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee28000-0x000000003ee6efff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ee6f000-0x000000003eebcfff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003eebd000-0x000000003eebefff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000003eebf000-0x000000003ef41fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003ef42000-0x000000003efbefff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efbf000-0x000000003efeefff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efef000-0x000000003effefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000003efff000-0x000000003effffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000fff03fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<7>[ 0.000000] e820: update [mem 0x3d320018-0x3d330057] usable ==> usable
<6>[ 0.000000] extended physical RAM map:
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003d320017] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003d320018-0x000000003d330057] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003d330058-0x000000003ede6fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ede7000-0x000000003ee1efff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee1f000-0x000000003ee27fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee28000-0x000000003ee6efff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ee6f000-0x000000003eebcfff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003eebd000-0x000000003eebefff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x000000003eebf000-0x000000003ef41fff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003ef42000-0x000000003efbefff] ACPI NVS
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efbf000-0x000000003efeefff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efef000-0x000000003effefff] ACPI data
<6>[ 0.000000] reserve setup_data: [mem 0x000000003efff000-0x000000003effffff] usable
<6>[ 0.000000] reserve setup_data: [mem 0x00000000fff00000-0x00000000fff03fff] reserved
<6>[ 0.000000] reserve setup_data: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
<6>[ 0.000000] efi: EFI v2.0 by
<6>[ 0.000000] efi: ACPI 2.0=0x3effe014 SMBIOS=0x3eebe000 MOKvar=0x3ede7000
<6>[ 0.000000] efi: Not removing mem112: MMIO range=[0xfff00000-0xfff03fff] (16KB) from e820 map
<6>[ 0.000000] efi: Not removing mem113: MMIO range=[0xfffff000-0xffffffff] (4KB) from e820 map
<6>[ 0.000000] SMBIOS 2.5 present.
<6>[ 0.000000] DMI: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010
<6>[ 0.000000] DMI: Memory slots populated: 2/2
<6>[ 0.000000] tsc: Fast TSC calibration using PIT
<6>[ 0.000000] tsc: Detected 1666.698 MHz processor
<7>[ 0.003035] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.003050] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.003077] last_pfn = 0x3f000 max_arch_pfn = 0x400000000
<6>[ 0.003096] MTRR map: 8 entries (4 fixed + 4 variable; max 18), built from 7 variable MTRRs
<6>[ 0.003105] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.024162] printk: log_buf_len: 1048576 bytes
<6>[ 0.024172] printk: early log buf free: 257760(98%)
<6>[ 0.024177] Secure boot disabled
<6>[ 0.024187] ACPI: Early table checksum verification disabled
<6>[ 0.024204] ACPI: RSDP 0x000000003EFFE014 000024 (v02 INTEL )
<6>[ 0.024221] ACPI: XSDT 0x000000003EFFE120 00004C (v01 INTEL MOPNV10J 00000137 01000013)
<6>[ 0.024245] ACPI: FACP 0x000000003EFFD000 0000F4 (v03 INTEL MOPNV10J 00000137 MSFT 0100000D)
<4>[ 0.024265] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20240827/tbfadt-560)
<4>[ 0.024278] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20240827/tbfadt-560)
<4>[ 0.024289] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20240827/tbfadt-665)
<4>[ 0.024299] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20240827/tbfadt-665)
<6>[ 0.024315] ACPI: DSDT 0x000000003EFF9000 0039A2 (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024333] ACPI: FACS 0x000000003EF87000 000040
<6>[ 0.024347] ACPI: FACS 0x000000003EF87000 000040
<6>[ 0.024361] ACPI: APIC 0x000000003EFF8000 000084 (v02 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024378] ACPI: MCFG 0x000000003EFF7000 00003C (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024394] ACPI: HPET 0x000000003EFF6000 000038 (v01 INTEL MOPNV10J 00000137 MSFT 0100000D)
<6>[ 0.024411] ACPI: SSDT 0x000000003EFF2000 00377C (v01 INTEL SSDT PM 00000137 MSFT 0100000D)
<6>[ 0.024424] ACPI: Reserving FACP table memory at [mem 0x3effd000-0x3effd0f3]
<6>[ 0.024433] ACPI: Reserving DSDT table memory at [mem 0x3eff9000-0x3effc9a1]
<6>[ 0.024438] ACPI: Reserving FACS table memory at [mem 0x3ef87000-0x3ef8703f]
<6>[ 0.024443] ACPI: Reserving FACS table memory at [mem 0x3ef87000-0x3ef8703f]
<6>[ 0.024448] ACPI: Reserving APIC table memory at [mem 0x3eff8000-0x3eff8083]
<6>[ 0.024453] ACPI: Reserving MCFG table memory at [mem 0x3eff7000-0x3eff703b]
<6>[ 0.024458] ACPI: Reserving HPET table memory at [mem 0x3eff6000-0x3eff6037]
<6>[ 0.024462] ACPI: Reserving SSDT table memory at [mem 0x3eff2000-0x3eff577b]
<6>[ 0.025074] No NUMA configuration found
<6>[ 0.025081] Faking a node at [mem 0x0000000000000000-0x000000003effffff]
<6>[ 0.025149] NODE_DATA(0) allocated [mem 0x3efc3fc0-0x3efeefff]
<6>[ 0.026290] Zone ranges:
<6>[ 0.026298] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.026308] DMA32 [mem 0x0000000001000000-0x000000003effffff]
<6>[ 0.026315] Normal empty
<6>[ 0.026319] Device empty
<6>[ 0.026324] Movable zone start for each node
<6>[ 0.026333] Early memory node ranges
<6>[ 0.026336] node 0: [mem 0x0000000000001000-0x000000000008efff]
<6>[ 0.026342] node 0: [mem 0x0000000000090000-0x000000000009ffff]
<6>[ 0.026346] node 0: [mem 0x0000000000100000-0x000000003ede6fff]
<6>[ 0.026352] node 0: [mem 0x000000003ee1f000-0x000000003ee27fff]
<6>[ 0.026357] node 0: [mem 0x000000003ee6f000-0x000000003eebcfff]
<6>[ 0.026362] node 0: [mem 0x000000003eebf000-0x000000003ef41fff]
<6>[ 0.026367] node 0: [mem 0x000000003efbf000-0x000000003efeefff]
<6>[ 0.026372] node 0: [mem 0x000000003efff000-0x000000003effffff]
<6>[ 0.026378] Initmem setup node 0 [mem 0x0000000000001000-0x000000003effffff]
<6>[ 0.026427] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.026437] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.026604] On node 0, zone DMA: 96 pages in unavailable ranges
<6>[ 0.036553] On node 0, zone DMA32: 56 pages in unavailable ranges
<6>[ 0.036605] On node 0, zone DMA32: 71 pages in unavailable ranges
<6>[ 0.036617] On node 0, zone DMA32: 2 pages in unavailable ranges
<6>[ 0.036692] On node 0, zone DMA32: 125 pages in unavailable ranges
<6>[ 0.036707] On node 0, zone DMA32: 16 pages in unavailable ranges
<6>[ 0.039197] On node 0, zone DMA32: 4096 pages in unavailable ranges
<6>[ 0.039216] Reserving Intel graphics memory at [mem 0x3f800000-0x3fffffff]
<6>[ 0.039512] ACPI: PM-Timer IO Port: 0x408
<6>[ 0.039551] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
<6>[ 0.039560] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
<6>[ 0.039565] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
<6>[ 0.039569] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
<6>[ 0.039651] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
<6>[ 0.039670] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.039678] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.039699] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.039705] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[ 0.039758] CPU topo: Max. logical packages: 1
<6>[ 0.039762] CPU topo: Max. logical dies: 1
<6>[ 0.039766] CPU topo: Max. dies per package: 1
<6>[ 0.039792] CPU topo: Max. threads per core: 2
<6>[ 0.039796] CPU topo: Num. cores per package: 2
<6>[ 0.039800] CPU topo: Num. threads per package: 4
<6>[ 0.039803] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
<6>[ 0.039959] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.039974] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
<6>[ 0.039988] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
<6>[ 0.040001] PM: hibernation: Registered nosave memory: [mem 0x3d320000-0x3d320fff]
<6>[ 0.040014] PM: hibernation: Registered nosave memory: [mem 0x3d330000-0x3d330fff]
<6>[ 0.040027] PM: hibernation: Registered nosave memory: [mem 0x3ede7000-0x3ee1efff]
<6>[ 0.040040] PM: hibernation: Registered nosave memory: [mem 0x3ee28000-0x3ee6efff]
<6>[ 0.040053] PM: hibernation: Registered nosave memory: [mem 0x3eebd000-0x3eebefff]
<6>[ 0.040067] PM: hibernation: Registered nosave memory: [mem 0x3ef42000-0x3efbefff]
<6>[ 0.040081] PM: hibernation: Registered nosave memory: [mem 0x3efef000-0x3effefff]
<6>[ 0.040095] [mem 0x40000000-0xffefffff] available for PCI devices
<6>[ 0.040104] Booting paravirtualized kernel on bare hardware
<6>[ 0.040112] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.040184] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
<6>[ 0.042335] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.042390] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.042402] pcpu-alloc: [0] 0 1 2 3
<5>[ 0.042546] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/sda2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel ro
<5>[ 0.043305] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<6>[ 0.043881] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
<6>[ 0.044226] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.044451] Fallback order for Node 0: 0
<6>[ 0.044473] Built 1 zonelists, mobility grouping on. Total pages: 257680
<6>[ 0.044480] Policy zone: DMA32
<6>[ 0.044554] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.044560] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.044584] stackdepot hash table entries: 65536 (order: 8, 1048576 bytes, linear)
<4>[ 0.089844] **********************************************************
<4>[ 0.089855] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.089858] ** **
<4>[ 0.089860] ** This system shows unhashed kernel memory addresses **
<4>[ 0.089863] ** via the console, logs, and other interfaces. This **
<4>[ 0.089866] ** might reduce the security of your system. **
<4>[ 0.089868] ** **
<4>[ 0.089871] ** If you see this message and you are not debugging **
<4>[ 0.089874] ** the kernel, report this immediately to your system **
<4>[ 0.089877] ** administrator! **
<4>[ 0.089879] ** **
<4>[ 0.089882] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.089884] **********************************************************
<6>[ 0.139189] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[ 0.145769] ftrace: allocating 59411 entries in 233 pages
<6>[ 0.169694] ftrace: allocated 233 pages with 5 groups
<6>[ 0.180107] Dynamic Preempt: voluntary
<6>[ 0.185494] Running RCU self tests
<6>[ 0.185502] Running RCU synchronous self tests
<6>[ 0.185589] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.185593] rcu: RCU lockdep checking is enabled.
<6>[ 0.185596] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
<6>[ 0.185604] Trampoline variant of Tasks RCU enabled.
<6>[ 0.185606] Rude variant of Tasks RCU enabled.
<6>[ 0.185608] Tracing variant of Tasks RCU enabled.
<6>[ 0.185611] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.185615] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
<6>[ 0.186015] Running RCU synchronous self tests
<6>[ 0.186053] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.186086] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.186118] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
<6>[ 0.336057] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
<6>[ 0.339247] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.340899] Console: colour dummy device 80x25
<6>[ 0.340979] printk: legacy console [tty0] enabled
<4>[ 0.353885] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.353989] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.354046] ... MAX_LOCK_DEPTH: 48
<4>[ 0.354101] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.354159] ... CLASSHASH_SIZE: 4096
<4>[ 0.354216] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.354274] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.354333] ... CHAINHASH_SIZE: 262144
<4>[ 0.354392] memory used by lock dependency info: 54145 kB
<4>[ 0.354458] memory used for stack traces: 4224 kB
<4>[ 0.354519] per task-struct memory footprint: 1920 bytes
<6>[ 0.355551] ACPI: Core revision 20240827
<6>[ 0.359674] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
<6>[ 0.359979] APIC: Switch to symmetric I/O mode setup
<6>[ 0.362921] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.367899] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x18064426677, max_idle_ns: 440795237587 ns
<6>[ 0.368092] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.39 BogoMIPS (lpj=1666698)
<6>[ 0.368252] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.368624] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
<6>[ 0.368700] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
<6>[ 0.368793] process: using mwait in idle threads
<6>[ 0.369096] x86/fpu: x87 FPU will use FXSAVE
<6>[ 0.528692] Freeing SMP alternatives memory: 48K
<6>[ 0.528800] pid_max: default: 32768 minimum: 301
<6>[ 0.563139] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.564715] landlock: Up and running.
<6>[ 0.564772] Yama: becoming mindful.
<6>[ 0.567287] AppArmor: AppArmor initialized
<6>[ 0.571169] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[ 0.571294] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
<6>[ 0.587070] Running RCU synchronous self tests
<6>[ 0.587152] Running RCU synchronous self tests
<6>[ 0.691769] smpboot: CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
<6>[ 0.703823] Running RCU Tasks wait API self tests
<6>[ 0.811295] Running RCU Tasks Rude wait API self tests
<6>[ 0.811864] Running RCU Tasks Trace wait API self tests
<6>[ 0.812190] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
<6>[ 0.812423] ... version: 3
<6>[ 0.812479] ... bit width: 40
<6>[ 0.812532] ... generic registers: 2
<6>[ 0.812583] ... value mask: 000000ffffffffff
<6>[ 0.812645] ... max period: 000000007fffffff
<6>[ 0.812707] ... fixed-purpose events: 3
<6>[ 0.812758] ... event mask: 0000000700000003
<6>[ 0.814202] signal: max sigframe size: 1440
<6>[ 0.815665] rcu: Hierarchical SRCU implementation.
<6>[ 0.815740] rcu: Max phase no-delay instances is 400.
<6>[ 0.819258] Callback from call_rcu_tasks_trace() invoked.
<6>[ 0.819644] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.852653] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.856099] smp: Bringing up secondary CPUs ...
<6>[ 0.864376] smpboot: x86: Booting SMP configuration:
<6>[ 0.864492] .... node #0, CPUs: #2 #1 #3
<4>[ 0.887042] TSC synchronization [CPU#0 -> CPU#3]:
<4>[ 0.887042] Measured 50 cycles TSC warp between CPUs, turning off TSC clock.
<6>[ 0.887132] tsc: Marking TSC unstable due to check_tsc_sync_source failed
<6>[ 0.888338] smp: Brought up 1 node, 4 CPUs
<6>[ 0.888406] smpboot: Total of 4 processors activated (13333.58 BogoMIPS)
<6>[ 0.902276] Memory: 876812K/1030720K available (24576K kernel code, 5563K rwdata, 9188K rodata, 5596K init, 68448K bss, 140612K reserved, 0K cma-reserved)
<6>[ 0.908090] devtmpfs: initialized
<6>[ 0.911128] x86/mm: Memory block size: 128MB
<6>[ 0.941456] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
<6>[ 0.941669] ACPI: PM: Registering ACPI NVS region [mem 0x3ef42000-0x3efbefff] (512000 bytes)
<6>[ 0.948275] Running RCU synchronous self tests
<6>[ 0.948409] Running RCU synchronous self tests
<6>[ 0.948672] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.949130] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
<6>[ 0.954164] pinctrl core: initialized pinctrl subsystem
<6>[ 0.959902] PM: RTC time: 21:48:22, date: 2024-11-18
<6>[ 0.974271] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.983260] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.983630] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.983962] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.984972] audit: initializing netlink subsys (disabled)
<5>[ 0.986361] audit: type=2000 audit(1731966502.623:1): state=initialized audit_enabled=0 res=1
<6>[ 0.997309] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.997333] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.997419] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.997505] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.997579] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.998403] EISA bus registered
<6>[ 0.998780] cpuidle: using governor ladder
<6>[ 0.999099] cpuidle: using governor menu
<6>[ 1.001130] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
<6>[ 1.001233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 1.008604] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
<6>[ 1.008737] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved)
<6>[ 1.008838] PCI: Using configuration type 1 for base access
<4>[ 1.009597] mtrr: your CPUs had inconsistent variable MTRR settings
<6>[ 1.009677] mtrr: probably your BIOS does not setup all CPUs.
<6>[ 1.009742] mtrr: corrected configuration.
<6>[ 1.011828] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 1.021354] Callback from call_rcu_tasks() invoked.
<6>[ 1.026738] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 1.026840] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 1.075820] raid6: sse2x4 gen() 2471 MB/s
<6>[ 1.092814] raid6: sse2x2 gen() 2148 MB/s
<6>[ 1.109826] raid6: sse2x1 gen() 1561 MB/s
<6>[ 1.109888] raid6: using algorithm sse2x4 gen() 2471 MB/s
<6>[ 1.126816] raid6: .... xor() 909 MB/s, rmw enabled
<6>[ 1.126885] raid6: using ssse3x2 recovery algorithm
<6>[ 1.134411] fbcon: Taking over console
<6>[ 1.136567] ACPI: Added _OSI(Module Device)
<6>[ 1.136639] ACPI: Added _OSI(Processor Device)
<6>[ 1.136713] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 1.136789] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 1.946666] ACPI: 2 ACPI AML tables successfully acquired and loaded
<5>[ 2.031756] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
<6>[ 2.121415] ACPI: Interpreter enabled
<6>[ 2.122499] ACPI: PM: (supports S0 S1 S3 S4 S5)
<6>[ 2.122578] ACPI: Using IOAPIC for interrupt routing
<6>[ 2.132361] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
<6>[ 2.144313] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
<6>[ 2.144577] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 2.144694] PCI: Using E820 reservations for host bridge windows
<6>[ 2.156666] ACPI: Enabled 11 GPEs in block 00 to 1F
<6>[ 2.709793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
<6>[ 2.710353] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.740477] PCI host bridge to bus 0000:00
<6>[ 2.741067] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.741187] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.741300] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.741420] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
<6>[ 2.741548] pci_bus 0000:00: root bus resource [bus 00-3f]
<6>[ 2.742385] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.745157] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000 conventional PCI endpoint
<6>[ 2.745296] pci 0000:00:02.0: BAR 0 [mem 0xf0200000-0xf027ffff]
<6>[ 2.745387] pci 0000:00:02.0: BAR 1 [io 0x20c0-0x20c7]
<6>[ 2.745467] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff pref]
<6>[ 2.745557] pci 0000:00:02.0: BAR 3 [mem 0xf0100000-0xf01fffff]
<6>[ 2.745923] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.754111] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
<6>[ 2.754276] pci 0000:00:1b.0: BAR 0 [mem 0xf0280000-0xf0283fff 64bit]
<6>[ 2.754853] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[ 2.761854] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 PCIe Root Port
<6>[ 2.762060] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 2.762141] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
<6>[ 2.762248] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 2.762799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.769598] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 PCIe Root Port
<6>[ 2.769775] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 2.770395] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>[ 2.778187] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 PCIe Root Port
<6>[ 2.778353] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 2.778939] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
<6>[ 2.785807] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 PCIe Root Port
<6>[ 2.785974] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 2.786536] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
<6>[ 2.793727] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.793950] pci 0000:00:1d.0: BAR 4 [io 0x2080-0x209f]
<6>[ 2.800945] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.801171] pci 0000:00:1d.1: BAR 4 [io 0x2060-0x207f]
<6>[ 2.807817] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.808346] pci 0000:00:1d.2: BAR 4 [io 0x2040-0x205f]
<6>[ 2.815118] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 conventional PCI endpoint
<6>[ 2.815339] pci 0000:00:1d.3: BAR 4 [io 0x2020-0x203f]
<6>[ 2.822464] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 conventional PCI endpoint
<6>[ 2.822628] pci 0000:00:1d.7: BAR 0 [mem 0xf0284400-0xf02847ff]
<6>[ 2.823150] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>[ 2.829938] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 conventional PCI bridge
<6>[ 2.830120] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
<6>[ 2.837227] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.837735] pci 0000:00:1f.0: [Firmware Bug]: Tiger Point LPC.BM_STS cleared
<6>[ 2.844966] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 conventional PCI endpoint
<6>[ 2.845100] pci 0000:00:1f.2: BAR 0 [io 0x20b8-0x20bf]
<6>[ 2.845193] pci 0000:00:1f.2: BAR 1 [io 0x20cc-0x20cf]
<6>[ 2.845281] pci 0000:00:1f.2: BAR 2 [io 0x20b0-0x20b7]
<6>[ 2.845369] pci 0000:00:1f.2: BAR 3 [io 0x20c8-0x20cb]
<6>[ 2.845456] pci 0000:00:1f.2: BAR 4 [io 0x20a0-0x20af]
<6>[ 2.845549] pci 0000:00:1f.2: BAR 5 [mem 0xf0284000-0xf02843ff]
<6>[ 2.845963] pci 0000:00:1f.2: PME# supported from D3hot
<6>[ 2.852900] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.853139] pci 0000:00:1f.3: BAR 4 [io 0x2000-0x201f]
<6>[ 2.856802] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.856947] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]
<6>[ 2.857092] pci 0000:01:00.0: BAR 2 [mem 0xf0004000-0xf0004fff 64bit pref]
<6>[ 2.857208] pci 0000:01:00.0: BAR 4 [mem 0xf0000000-0xf0003fff 64bit pref]
<6>[ 2.857309] pci 0000:01:00.0: ROM [mem 0xfffe0000-0xffffffff pref]
<6>[ 2.858153] pci 0000:01:00.0: supports D1 D2
<6>[ 2.858223] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.861504] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 2.863148] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 2.864476] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 2.865855] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 2.866149] pci_bus 0000:05: extended config space not accessible
<6>[ 2.867439] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
<6>[ 2.867593] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
<6>[ 2.867739] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
<6>[ 2.867870] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
<6>[ 2.868004] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
<6>[ 2.877166] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
<6>[ 2.884957] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
<6>[ 2.885063] ACPI: PCI: Interrupt link LNKB disabled
<6>[ 2.894569] ACPI: PCI: Interrupt link LNKC configured for IRQ 9
<6>[ 2.902771] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
<6>[ 2.910934] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
<6>[ 2.911028] ACPI: PCI: Interrupt link LNKE disabled
<6>[ 2.918677] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
<6>[ 2.918771] ACPI: PCI: Interrupt link LNKF disabled
<6>[ 2.927325] ACPI: PCI: Interrupt link LNKG configured for IRQ 9
<6>[ 2.935659] ACPI: PCI: Interrupt link LNKH configured for IRQ 10
<6>[ 2.983260] iommu: Default domain type: Translated
<6>[ 2.983270] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 3.002443] SCSI subsystem initialized
<7>[ 3.004896] libata version 3.00 loaded.
<6>[ 3.006881] ACPI: bus type USB registered
<6>[ 3.008232] usbcore: registered new interface driver usbfs
<6>[ 3.008879] usbcore: registered new interface driver hub
<6>[ 3.009566] usbcore: registered new device driver usb
<6>[ 3.011610] pps_core: LinuxPPS API ver. 1 registered
<6>[ 3.011684] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 3.012000] PTP clock support registered
<6>[ 3.015378] EDAC MC: Ver: 3.0.0
<6>[ 3.024106] efivars: Registered efivars operations
<6>[ 3.041265] NetLabel: Initializing
<6>[ 3.041332] NetLabel: domain hash size = 128
<6>[ 3.041388] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 3.042624] NetLabel: unlabeled traffic allowed by default
<6>[ 3.042917] mctp: management component transport protocol core
<6>[ 3.042991] NET: Registered PF_MCTP protocol family
<6>[ 3.043446] PCI: Using ACPI for IRQ routing
<7>[ 3.047722] PCI: pci_cache_line_size set to 64 bytes
<7>[ 3.047876] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
<7>[ 3.047980] e820: reserve RAM buffer [mem 0x3d320018-0x3fffffff]
<7>[ 3.048020] e820: reserve RAM buffer [mem 0x3ede7000-0x3fffffff]
<7>[ 3.048095] e820: reserve RAM buffer [mem 0x3ee28000-0x3fffffff]
<7>[ 3.048146] e820: reserve RAM buffer [mem 0x3eebd000-0x3fffffff]
<7>[ 3.048196] e820: reserve RAM buffer [mem 0x3ef42000-0x3fffffff]
<7>[ 3.048245] e820: reserve RAM buffer [mem 0x3efef000-0x3fffffff]
<7>[ 3.048294] e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff]
<6>[ 3.052677] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 3.052677] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 3.052677] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 3.053114] vgaarb: loaded
<6>[ 3.056091] hpet: 3 channels of 0 reserved for per-cpu timers
<6>[ 3.056209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
<6>[ 3.056306] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
<6>[ 3.059915] clocksource: Switched to clocksource hpet
<5>[ 3.154097] VFS: Disk quotas dquot_6.6.0
<6>[ 3.154950] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 3.170615] AppArmor: AppArmor Filesystem Enabled
<6>[ 3.171849] pnp: PnP ACPI init
<6>[ 3.176896] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
<6>[ 3.177065] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
<6>[ 3.177200] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
<6>[ 3.177334] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
<6>[ 3.177468] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
<6>[ 3.177638] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
<6>[ 3.177850] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
<6>[ 3.178017] system 00:00: [mem 0xfff00000-0xffffffff] could not be reserved
<6>[ 3.196207] system 00:02: [io 0x0500-0x053f] has been reserved
<6>[ 3.196359] system 00:02: [io 0x0400-0x047f] has been reserved
<6>[ 3.196488] system 00:02: [io 0x0680-0x06ff] has been reserved
<6>[ 3.196616] system 00:02: [io 0x0295-0x0296] has been reserved
<6>[ 3.262193] pnp: PnP ACPI: found 7 devices
<6>[ 3.385388] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 3.389913] NET: Registered PF_INET protocol family
<6>[ 3.390891] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
<6>[ 3.400500] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 36864 bytes, linear)
<6>[ 3.400895] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 3.401596] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
<6>[ 3.403497] TCP bind hash table entries: 8192 (order: 8, 1179648 bytes, linear)
<6>[ 3.405640] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 3.407064] UDP hash table entries: 512 (order: 4, 81920 bytes, linear)
<6>[ 3.407456] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes, linear)
<6>[ 3.411193] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 3.411904] pci 0000:01:00.0: ROM [mem 0xfffe0000-0xffffffff pref]: can't claim; no compatible bridge window
<6>[ 3.412087] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 100000 add_align 100000
<6>[ 3.412239] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
<6>[ 3.412367] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
<6>[ 3.412518] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
<6>[ 3.412662] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
<6>[ 3.412848] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
<6>[ 3.413002] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
<6>[ 3.413145] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
<6>[ 3.413269] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
<6>[ 3.413420] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
<6>[ 3.414079] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]: assigned
<6>[ 3.414182] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd03fffff]: assigned
<6>[ 3.414278] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]: assigned
<6>[ 3.414378] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff]: assigned
<6>[ 3.414472] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]: assigned
<6>[ 3.414572] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff]: assigned
<6>[ 3.414666] pci 0000:00:1c.3: bridge window [mem 0xd0c00000-0xd0dfffff 64bit pref]: assigned
<6>[ 3.414862] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]: assigned
<6>[ 3.414950] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 3.415034] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 3.415528] pci 0000:01:00.0: ROM [mem 0xd0000000-0xd001ffff pref]: assigned
<6>[ 3.415635] pci 0000:00:1c.0: PCI bridge to [bus 01]
<6>[ 3.415708] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
<6>[ 3.415888] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
<6>[ 3.415976] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 3.416078] pci 0000:00:1c.1: PCI bridge to [bus 02]
<6>[ 3.416146] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
<6>[ 3.416227] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd03fffff]
<6>[ 3.416312] pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
<6>[ 3.416413] pci 0000:00:1c.2: PCI bridge to [bus 03]
<6>[ 3.416480] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
<6>[ 3.416562] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd07fffff]
<6>[ 3.416646] pci 0000:00:1c.2: bridge window [mem 0xd0800000-0xd09fffff 64bit pref]
<6>[ 3.416794] pci 0000:00:1c.3: PCI bridge to [bus 04]
<6>[ 3.416870] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
<6>[ 3.416952] pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff]
<6>[ 3.417037] pci 0000:00:1c.3: bridge window [mem 0xd0c00000-0xd0dfffff 64bit pref]
<6>[ 3.417142] pci 0000:00:1e.0: PCI bridge to [bus 05]
<6>[ 3.417232] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 3.417308] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 3.417382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 3.417462] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff window]
<6>[ 3.417543] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
<6>[ 3.417612] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd01fffff]
<6>[ 3.417686] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
<6>[ 3.417816] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
<6>[ 3.417897] pci_bus 0000:02: resource 1 [mem 0xd0200000-0xd03fffff]
<6>[ 3.417972] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
<6>[ 3.418058] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
<6>[ 3.418126] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd07fffff]
<6>[ 3.418201] pci_bus 0000:03: resource 2 [mem 0xd0800000-0xd09fffff 64bit pref]
<6>[ 3.418286] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
<6>[ 3.418355] pci_bus 0000:04: resource 1 [mem 0xd0a00000-0xd0bfffff]
<6>[ 3.418429] pci_bus 0000:04: resource 2 [mem 0xd0c00000-0xd0dfffff 64bit pref]
<6>[ 3.418515] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 3.418589] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
<6>[ 3.418663] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 3.418823] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xf7ffffff window]
<6>[ 3.450898] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 28805 usecs
<6>[ 3.479503] pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x7c0 took 27785 usecs
<6>[ 3.509241] pci 0000:00:1d.2: quirk_usb_early_handoff+0x0/0x7c0 took 28895 usecs
<6>[ 3.539152] pci 0000:00:1d.3: quirk_usb_early_handoff+0x0/0x7c0 took 29063 usecs
<6>[ 3.569570] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x7c0 took 29559 usecs
<6>[ 3.569822] PCI: CLS 64 bytes, default 64
<5>[ 3.601019] Initialise system trusted keyrings
<5>[ 3.601905] Key type blacklist registered
<6>[ 3.603682] workingset: timestamp_bits=36 max_order=18 bucket_order=0
<6>[ 3.728113] zbud: loaded
<6>[ 3.746622] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 3.748971] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 3.749046] ntfs3: Read-only LZX/Xpress compression included
<5>[ 3.753657] integrity: Platform Keyring initialized
<5>[ 3.753957] integrity: Machine keyring initialized
<6>[ 3.814719] xor: measuring software checksum speed
<6>[ 3.815394] prefetch64-sse : 6225 MB/sec
<6>[ 3.816100] generic_sse : 5115 MB/sec
<6>[ 3.816160] xor: using function: prefetch64-sse (6225 MB/sec)
<5>[ 3.816238] Key type asymmetric registered
<5>[ 3.816378] Asymmetric key parser 'x509' registered
<6>[ 3.817616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 3.819619] io scheduler mq-deadline registered
<6>[ 3.826371] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 3.843487] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
<6>[ 3.858999] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
<6>[ 3.874600] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
<6>[ 3.893384] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[ 3.908251] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
<6>[ 3.912355] ACPI: button: Sleep Button [SLPB]
<6>[ 3.914810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[ 3.916612] ACPI: button: Power Button [PWRF]
<6>[ 3.988660] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 4.016108] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
<6>[ 4.055516] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 4.260379] Linux agpgart interface v0.103
<6>[ 4.265441] ACPI: bus type drm_connector registered
<6>[ 4.407056] loop: module loaded
<5>[ 4.732462] Key type psk registered
<7>[ 4.746680] ahci 0000:00:1f.2: version 3.0
<6>[ 4.763508] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
<6>[ 4.763652] ahci 0000:00:1f.2: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
<6>[ 4.763853] ahci 0000:00:1f.2: 2/4 ports implemented (port mask 0x3)
<6>[ 4.763970] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
<6>[ 4.794499] scsi host0: ahci
<6>[ 4.804089] scsi host1: ahci
<6>[ 4.812245] scsi host2: ahci
<6>[ 4.820623] scsi host3: ahci
<6>[ 4.824979] ata1: SATA max UDMA/133 abar m1024@0xf0284000 port 0xf0284100 irq 24 lpm-pol 3
<6>[ 4.825092] ata2: SATA max UDMA/133 abar m1024@0xf0284000 port 0xf0284180 irq 24 lpm-pol 3
<6>[ 4.825188] ata3: DUMMY
<6>[ 4.825229] ata4: DUMMY
<6>[ 4.837418] tun: Universal TUN/TAP device driver, 1.6
<6>[ 4.872385] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[ 4.873465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>[ 4.873841] uhci_hcd 0000:00:1d.0: detected 2 ports
<6>[ 4.874625] uhci_hcd 0000:00:1d.0: irq 23, io port 0x00002080
<6>[ 4.880225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 4.880412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.880508] usb usb1: Product: UHCI Host Controller
<6>[ 4.880577] usb usb1: Manufacturer: Linux 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ uhci_hcd
<6>[ 4.880675] usb usb1: SerialNumber: 0000:00:1d.0
<6>[ 4.889486] hub 1-0:1.0: USB hub found
<6>[ 4.890372] hub 1-0:1.0: 2 ports detected
<6>[ 4.930488] ehci-pci 0000:00:1d.7: EHCI Host Controller
<6>[ 4.931082] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>[ 4.931323] ehci-pci 0000:00:1d.7: debug port 1
<6>[ 4.936131] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0284400
<6>[ 4.941960] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[ 4.946488] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 4.946657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.946826] usb usb2: Product: EHCI Host Controller
<6>[ 4.946903] usb usb2: Manufacturer: Linux 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ ehci_hcd
<6>[ 4.947015] usb usb2: SerialNumber: 0000:00:1d.7
<6>[ 4.955209] hub 2-0:1.0: USB hub found
<6>[ 4.955931] hub 2-0:1.0: 8 ports detected
<6>[ 4.996099] hub 1-0:1.0: USB hub found
<6>[ 4.996951] hub 1-0:1.0: 2 ports detected
<6>[ 5.003484] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[ 5.003980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
<6>[ 5.004237] uhci_hcd 0000:00:1d.1: detected 2 ports
<6>[ 5.005064] uhci_hcd 0000:00:1d.1: irq 19, io port 0x00002060
<6>[ 5.008374] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 5.008499] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.008593] usb usb3: Product: UHCI Host Controller
<6>[ 5.008663] usb usb3: Manufacturer: Linux 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ uhci_hcd
<6>[ 5.008813] usb usb3: SerialNumber: 0000:00:1d.1
<6>[ 5.015114] hub 3-0:1.0: USB hub found
<6>[ 5.015585] hub 3-0:1.0: 2 ports detected
<6>[ 5.037934] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[ 5.038246] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
<6>[ 5.038428] uhci_hcd 0000:00:1d.2: detected 2 ports
<6>[ 5.038934] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00002040
<6>[ 5.041873] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 5.041997] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.042092] usb usb4: Product: UHCI Host Controller
<6>[ 5.042160] usb usb4: Manufacturer: Linux 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ uhci_hcd
<6>[ 5.042258] usb usb4: SerialNumber: 0000:00:1d.2
<6>[ 5.049387] hub 4-0:1.0: USB hub found
<6>[ 5.050419] hub 4-0:1.0: 2 ports detected
<6>[ 5.073405] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[ 5.073676] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
<6>[ 5.073914] uhci_hcd 0000:00:1d.3: detected 2 ports
<6>[ 5.074404] uhci_hcd 0000:00:1d.3: irq 16, io port 0x00002020
<6>[ 5.077284] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
<6>[ 5.077407] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.077502] usb usb5: Product: UHCI Host Controller
<6>[ 5.077570] usb usb5: Manufacturer: Linux 6.12.0-CI_DRM_15717-g1fe9a6cc7d13+ uhci_hcd
<6>[ 5.077668] usb usb5: SerialNumber: 0000:00:1d.3
<6>[ 5.084673] hub 5-0:1.0: USB hub found
<6>[ 5.085187] hub 5-0:1.0: 2 ports detected
<6>[ 5.095461] usbcore: registered new interface driver usb-storage
<6>[ 5.096993] usbcore: registered new interface driver usbserial_generic
<6>[ 5.097678] usbserial: USB Serial support registered for generic
<6>[ 5.098353] usbcore: registered new interface driver ftdi_sio
<6>[ 5.098793] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 5.099363] usbcore: registered new interface driver pl2303
<6>[ 5.099725] usbserial: USB Serial support registered for pl2303
<6>[ 5.100917] i8042: PNP: No PS/2 controller found.
<6>[ 5.105085] mousedev: PS/2 mouse device common for all mice
<6>[ 5.112927] rtc_cmos 00:01: RTC can wake from S4
<6>[ 5.122161] rtc_cmos 00:01: registered as rtc0
<6>[ 5.122467] rtc_cmos 00:01: setting system clock to 2024-11-18T21:48:27 UTC (1731966507)
<6>[ 5.124343] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
<6>[ 5.124984] i2c_dev: i2c /dev entries driver
<6>[ 5.133093] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 5.133247] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 5.133346] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 5.133703] device-mapper: uevent: version 1.0.3
<6>[ 5.137349] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 5.138374] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 5.138663] platform eisa.0: Probing EISA bus 0
<4>[ 5.138893] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 5.139066] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 5.139193] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 5.139372] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 5.139556] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 5.139836] ata1.00: Model 'INTEL SSDSC2KW240H6', rev ' LSF036C', applying quirks: zeroaftertrim
<4>[ 5.139878] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 5.140147] platform eisa.0: Cannot allocate resource for EISA slot 6
<6>[ 5.140172] ata1.00: ATA-10: INTEL SSDSC2KW240H6, LSF036C, max UDMA/133
<4>[ 5.140315] platform eisa.0: Cannot allocate resource for EISA slot 7
<6>[ 5.140477] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
<4>[ 5.140515] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 5.140710] platform eisa.0: EISA: Detected 0 cards
<6>[ 5.140870] intel_pstate: CPU model not supported
<6>[ 5.140933] sdhci: Secure Digital Host Controller Interface driver
<6>[ 5.141033] sdhci: Copyright(c) Pierre Ossman
<6>[ 5.141270] ata1.00: Features: Dev-Sleep
<6>[ 5.142365] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 5.142597] ata1.00: configured for UDMA/133
<5>[ 5.149984] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2KW24 036C PQ: 0 ANSI: 5
<7>[ 5.163379] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] display mode={"": 60 28800 800 800 800 800 600 600 600 600 0x40 0x0}
<7>[ 5.163456] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] framebuffer format=XR24 little-endian (0x34325258), size=800x600, stride=3200 byte
<7>[ 5.164006] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] using I/O memory framebuffer at [mem 0xe0000000-0xe01d4fff flags 0x200]
<7>[ 5.168222] simple-framebuffer simple-framebuffer.0: [drm:drm_fb_build_fourcc_list] adding native format XR24 little-endian (0x34325258)
<5>[ 5.173375] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 5.173378] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
<5>[ 5.173723] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 5.173879] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 5.174265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 5.175300] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
<7>[ 5.179146] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_add] [CONNECTOR:36:Unknown-1] adding connector to sysfs
<7>[ 5.182078] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:36:Unknown-1] generating connector hotplug event
<6>[ 5.182477] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
<7>[ 5.183338] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe]
<7>[ 5.184297] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1]
<7>[ 5.184364] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] status updated from unknown to connected
<7>[ 5.184622] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] probed modes:
<7>[ 5.184665] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 28800 800 800 800 800 600 600 600 600 0x48 0x0
<7>[ 5.184697] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] enabled? yes
<7>[ 5.185018] simple-framebuffer simple-framebuffer.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 5.185096] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for cmdline mode
<7>[ 5.185123] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for preferred mode, tile 0
<7>[ 5.185147] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] Found mode 800x600
<7>[ 5.185169] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
<7>[ 5.185261] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CRTC:34:crtc-0] desired mode 800x600 set (0,0)
<7>[ 5.185461] simple-framebuffer simple-framebuffer.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7>[ 5.185523] simple-framebuffer simple-framebuffer.0: [drm:drm_fbdev_shmem_driver_fbdev_probe] surface width(800), height(600) and bpp(32)
<7>[ 5.187110] simple-framebuffer simple-framebuffer.0: [drm:drm_mode_addfb2] [FB:37]
<6>[ 5.214378] Console: switching to colour frame buffer device 100x37
<6>[ 5.225253] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
<6>[ 5.230848] drop_monitor: Initializing network drop monitor service
<6>[ 5.235102] NET: Registered PF_INET6 protocol family
<6>[ 5.262843] Segment Routing with IPv6
<6>[ 5.263722] In-situ OAM (IOAM) with IPv6
<6>[ 5.264439] NET: Registered PF_PACKET protocol family
<5>[ 5.267238] Key type dns_resolver registered
<6>[ 5.280186] microcode: Current revision: 0x00000107
<6>[ 5.283964] IPI shorthand broadcast: enabled
<6>[ 5.491201] ata2: SATA link down (SStatus 0 SControl 300)
<6>[ 5.537614] registered taskstats version 1
<5>[ 5.550803] Loading compiled-in X.509 certificates
<6>[ 5.932926] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 5.942038] ata1.00: configured for UDMA/133
<6>[ 5.955812] sda: sda1 sda2
<5>[ 5.967967] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 6.103440] Demotion targets for Node 0: null
<6>[ 6.109010] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 6.109081] kmemleak: Automatic memory scanning thread started
<5>[ 6.116123] Key type .fscrypt registered
<5>[ 6.118597] Key type fscrypt-provisioning registered
<6>[ 6.170154] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 6.195269] Key type encrypted registered
<6>[ 6.198028] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 6.213697] ima: No TPM chip found, activating TPM-bypass!
<5>[ 6.216306] Loading compiled-in module X.509 certificates
<5>[ 6.230456] Loaded X.509 cert 'Build time autogenerated kernel key: f13948e860e9448d7ab34142a5f1717facdf2736'
<6>[ 6.234964] ima: Allocated hash algorithm: sha256
<6>[ 6.238630] ima: No architecture policies found
<6>[ 6.243321] evm: Initialising EVM extended attributes:
<6>[ 6.246025] evm: security.selinux
<6>[ 6.248556] evm: security.SMACK64
<6>[ 6.251024] evm: security.SMACK64EXEC
<6>[ 6.253399] evm: security.SMACK64TRANSMUTE
<6>[ 6.255657] evm: security.SMACK64MMAP
<6>[ 6.257936] evm: security.apparmor
<6>[ 6.260121] evm: security.ima
<6>[ 6.262251] evm: security.capability
<6>[ 6.264235] evm: HMAC attrs: 0x1
<6>[ 6.298178] PM: Magic number: 0:401:854
<6>[ 6.303799] printk: legacy console [netcon0] enabled
<6>[ 6.305593] netconsole: network logging started
<4>[ 6.338658] ACPI: \_PR_.CPU0: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.345330] ACPI: \_PR_.CPU1: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.351125] ACPI: \_PR_.CPU2: _PSS evaluation failed: AE_NOT_FOUND
<4>[ 6.357895] ACPI: \_PR_.CPU3: _PSS evaluation failed: AE_NOT_FOUND
<6>[ 6.367007] RAS: Correctable Errors collector initialized.
<6>[ 6.373665] clk: Disabling unused clocks
<6>[ 6.379245] PM: genpd: Disabling unused power domains
<6>[ 6.384874] md: Waiting for all devices to be available before autodetect
<6>[ 6.386642] md: If you don't use raid, use raid=noautodetect
<6>[ 6.388923] md: Autodetecting RAID arrays.
<6>[ 6.391069] md: autorun ...
<6>[ 6.393018] md: ... autorun DONE.
<6>[ 6.752870] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 6.758270] ata1.00: configured for UDMA/133
<6>[ 7.121698] EXT4-fs (sda2): mounted filesystem 9b666f7d-f6c4-4be4-b8e1-b52612b06654 ro with ordered data mode. Quota mode: none.
<6>[ 7.128307] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
<6>[ 7.586905] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 7.593500] ata1.00: configured for UDMA/133
<6>[ 7.599182] devtmpfs: mounted
<4>[ 7.666618] ata1: limiting SATA link speed to 1.5 Gbps
<6>[ 7.761726] Freeing unused decrypted memory: 2028K
<6>[ 7.773899] Freeing unused kernel image (initmem) memory: 5596K
<6>[ 7.778395] Write protecting the kernel read-only data: 34816k
<6>[ 7.786137] Freeing unused kernel image (rodata/data gap) memory: 1052K
<6>[ 7.875874] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 7.880234] Run /sbin/init as init process
<7>[ 7.882026] with arguments:
<7>[ 7.882052] /sbin/init
<7>[ 7.882073] with environment:
<7>[ 7.882089] HOME=/
<7>[ 7.882106] TERM=linux
<7>[ 7.882125] BOOT_IMAGE=/boot/drm_intel
<6>[ 8.394860] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 8.401479] ata1.00: configured for UDMA/133
<3>[ 8.925553] systemd[1]: Failed to find module 'autofs4'
<7>[ 9.261617] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 9.270329] systemd[1]: Detected architecture x86-64.
<7>[ 9.307066] systemd[1]: Hostname set to <fi-pnv-d510>.
<6>[ 10.370861] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 10.378023] ata1.00: configured for UDMA/133
<3>[ 11.578436] ata1.00: exception Emask 0x10 SAct 0x80000 SErr 0x4050000 action 0xe frozen
<3>[ 11.580794] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 11.583080] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 11.585324] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 11.587543] ata1.00: cmd 60/08:98:b8:c3:62/00:00:00:00:00/40 tag 19 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 11.591992] ata1.00: status: { DRDY }
<6>[ 11.594304] ata1: hard resetting link
<6>[ 12.322870] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 12.330184] ata1.00: configured for UDMA/133
<6>[ 12.333112] ata1: EH complete
<7>[ 13.375579] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 13.395107] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 14.458955] systemd[1]: Queued start job for default target graphical.target.
<3>[ 14.528870] ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x4050000 action 0xe frozen
<3>[ 14.531491] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 14.534008] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 14.536460] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 14.538901] ata1.00: cmd 60/90:30:f0:37:94/00:00:01:00:00/40 tag 6 ncq dma 73728 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 14.543782] ata1.00: status: { DRDY }
<6>[ 14.546275] ata1: hard resetting link
<6>[ 15.275871] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 15.282907] ata1.00: configured for UDMA/133
<6>[ 15.285949] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 15.291691] sd 0:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current]
<6>[ 15.294849] sd 0:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command
<6>[ 15.297957] sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 01 94 37 f0 00 00 90 00
<3>[ 15.301239] I/O error, dev sda, sector 26490864 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
<6>[ 15.307372] ata1: EH complete
<4>[ 15.397844] ata1.00: limiting speed to UDMA/100:PIO4
<7>[ 15.465623] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.511538] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.553012] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.567531] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.584641] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
<7>[ 15.600633] systemd[1]: Expecting device dev-disk-by\x2duuid-0C27\x2dDAF3.device - /dev/disk/by-uuid/0C27-DAF3...
<7>[ 15.615147] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.627378] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.639308] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.651443] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.663617] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.679867] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.697349] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.715084] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.731271] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.748043] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.764083] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.782859] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.800473] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.818549] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.832180] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.846237] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.863563] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<6>[ 16.112887] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 16.119050] ata1.00: configured for UDMA/100
<7>[ 16.140313] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.210465] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.309721] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 16.406146] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.524729] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.625431] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.723351] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.834515] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.941285] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.994726] systemd-journald[180]: Collecting audit messages is disabled.
<7>[ 17.032621] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 17.146723] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 17.241952] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 17.360054] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 17.454041] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 17.542323] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 17.570209] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 17.658269] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 17.776637] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 17.793409] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.802210] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.888265] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<5>[ 17.957083] random: crng init done
<7>[ 18.009843] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 18.479931] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 18.492650] ata1.00: configured for UDMA/100
<6>[ 18.584312] pstore: Using crash dump compression: deflate
<6>[ 18.676951] pstore: Registered efi_pstore as persistent store backend
<6>[ 18.724475] fuse: init (API version 7.41)
<6>[ 21.458869] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 21.466048] ata1.00: configured for UDMA/100
<6>[ 21.478664] EXT4-fs (sda2): re-mounted 9b666f7d-f6c4-4be4-b8e1-b52612b06654 r/w. Quota mode: none.
<6>[ 22.318904] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 22.322126] ata1.00: configured for UDMA/100
<6>[ 22.400024] Adding 4194300k swap on /swap.img. Priority:-2 extents:35 across:147218428k SS
<4>[ 22.792205] ata1.00: limiting speed to UDMA/33:PIO4
<7>[ 22.833019] systemd-journald[180]: Received client request to flush runtime journal.
<6>[ 23.520011] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 23.523391] ata1.00: configured for UDMA/33
<7>[ 23.948243] systemd-journald[180]: /var/log/journal/5417a49cea5840e88754911a4faa584b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 23.948404] systemd-journald[180]: Rotating system journal.
<6>[ 25.740892] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 25.743784] ata1.00: configured for UDMA/33
<6>[ 26.530875] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 26.533664] ata1.00: configured for UDMA/33
<3>[ 29.478924] ata1.00: exception Emask 0x10 SAct 0x2000000 SErr 0x4050000 action 0xe frozen
<3>[ 29.482938] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 29.486706] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 29.490374] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 29.493886] ata1.00: cmd 60/88:c8:70:23:68/00:00:00:00:00/40 tag 25 ncq dma 69632 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 29.500926] ata1.00: status: { DRDY }
<6>[ 29.504460] ata1: hard resetting link
<6>[ 30.239027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 30.242579] ata1.00: configured for UDMA/33
<6>[ 30.243338] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 30.243434] sd 0:0:0:0: [sda] tag#25 Sense Key : Illegal Request [current]
<6>[ 30.243512] sd 0:0:0:0: [sda] tag#25 Add. Sense: Unaligned write command
<6>[ 30.243593] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 00 68 23 70 00 00 88 00
<3>[ 30.243638] I/O error, dev sda, sector 6824816 op 0x0:(READ) flags 0x80700 phys_seg 17 prio class 0
<6>[ 30.251093] ata1: EH complete
<6>[ 31.132943] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 31.136608] ata1.00: configured for UDMA/33
<6>[ 33.022061] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 33.025832] ata1.00: configured for UDMA/33
<6>[ 34.060937] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 34.064828] ata1.00: configured for UDMA/33
<6>[ 34.852069] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 34.855825] ata1.00: configured for UDMA/33
<6>[ 35.041200] parport_pc 00:04: reported by Plug and Play ACPI
<6>[ 35.059404] parport0: PC-style at 0x378, irq 7 [PCSPP]
<3>[ 35.255495] ata1.00: exception Emask 0x10 SAct 0x1000000 SErr 0x4050000 action 0xe frozen
<3>[ 35.259539] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 35.263386] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 35.267157] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 35.270540] ata1.00: cmd 60/40:c0:80:38:94/00:00:01:00:00/40 tag 24 ncq dma 32768 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 35.277791] ata1.00: status: { DRDY }
<6>[ 35.281409] ata1: hard resetting link
<6>[ 36.010841] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 36.013581] ata1.00: configured for UDMA/33
<6>[ 36.013836] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 36.013900] sd 0:0:0:0: [sda] tag#24 Sense Key : Illegal Request [current]
<6>[ 36.013953] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unaligned write command
<6>[ 36.014008] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 01 94 38 80 00 00 40 00
<3>[ 36.014039] I/O error, dev sda, sector 26491008 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
<6>[ 36.019467] ata1: EH complete
<4>[ 36.065362] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20240827/utaddress-204)
<6>[ 36.065495] ACPI: OSL: Resource conflict; ACPI support missing from driver?
<4>[ 36.065597] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000518-0x000000000000051B (\BGPO) (20240827/utaddress-204)
<4>[ 36.065997] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000050C-0x000000000000050F (\IGPO) (20240827/utaddress-204)
<6>[ 36.066122] ACPI: OSL: Resource conflict; ACPI support missing from driver?
<4>[ 36.096558] lpc_ich: Resource conflict(s) found affecting gpio_ich
<3>[ 36.127043] ata1.00: exception Emask 0x10 SAct 0x1000000 SErr 0x4050000 action 0xe frozen
<3>[ 36.130887] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 36.134557] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 36.138203] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 36.141823] ata1.00: cmd 60/08:c0:90:ee:65/00:00:00:00:00/40 tag 24 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 36.149163] ata1.00: status: { DRDY }
<6>[ 36.152854] ata1: hard resetting link
<6>[ 36.886917] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 36.890724] ata1.00: configured for UDMA/33
<6>[ 36.891280] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 36.891371] sd 0:0:0:0: [sda] tag#24 Sense Key : Illegal Request [current]
<6>[ 36.891455] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unaligned write command
<6>[ 36.891538] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 00 65 ee 90 00 00 08 00
<3>[ 36.891584] I/O error, dev sda, sector 6680208 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 36.899036] ata1: EH complete
<6>[ 37.013981] r8169 0000:01:00.0: enabling device (0000 -> 0003)
<4>[ 37.023846] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
<6>[ 37.072095] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
<6>[ 37.098984] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
<6>[ 37.125572] i2c i2c-0: Successfully instantiated SPD at 0x50
<6>[ 37.131141] i2c i2c-0: Successfully instantiated SPD at 0x51
<6>[ 37.204358] intel_powerclamp: No package C-state available
<6>[ 37.297291] r8169 0000:01:00.0 eth0: RTL8168d/8111d, 00:27:0e:09:d0:f1, XID 281, IRQ 25
<6>[ 37.297336] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 37.973047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 37.976719] ata1.00: configured for UDMA/33
<3>[ 38.190712] ata1.00: exception Emask 0x10 SAct 0x1000 SErr 0x4050000 action 0xe frozen
<3>[ 38.194875] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 38.198901] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 38.202688] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 38.206357] ata1.00: cmd 60/50:60:c8:05:68/00:00:00:00:00/40 tag 12 ncq dma 40960 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 38.213661] ata1.00: status: { DRDY }
<6>[ 38.217325] ata1: hard resetting link
<6>[ 38.949868] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 38.952722] ata1.00: configured for UDMA/33
<6>[ 38.953045] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 38.953117] sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
<6>[ 38.953173] sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
<6>[ 38.953231] sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 68 05 c8 00 00 50 00
<3>[ 38.953264] I/O error, dev sda, sector 6817224 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 0
<6>[ 38.959128] ata1: EH complete
<4>[ 39.007213] at24 0-0050: supply vcc not found, using dummy regulator
<6>[ 39.067601] ppdev: user-space parallel port driver
<6>[ 39.085200] gpio_ich gpio_ich.2.auto: GPIO from 512 to 561
<6>[ 39.089542] at24 0-0050: 256 byte spd EEPROM, read-only
<4>[ 39.091575] at24 0-0051: supply vcc not found, using dummy regulator
<6>[ 39.138415] at24 0-0051: 256 byte spd EEPROM, read-only
<6>[ 39.221039] r8169 0000:01:00.0 enp1s0: renamed from eth0
<3>[ 39.263108] ata1.00: exception Emask 0x10 SAct 0x100000 SErr 0x4040000 action 0xe frozen
<3>[ 39.263140] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 39.263154] ata1: SError: { CommWake DevExch }
<3>[ 39.263175] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 39.263188] ata1.00: cmd 60/20:a0:70:93:66/00:00:00:00:00/40 tag 20 ncq dma 16384 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 39.263224] ata1.00: status: { DRDY }
<6>[ 39.263256] ata1: hard resetting link
<6>[ 39.992871] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 39.995653] ata1.00: configured for UDMA/33
<6>[ 39.995883] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 39.995947] sd 0:0:0:0: [sda] tag#20 Sense Key : Illegal Request [current]
<6>[ 39.996000] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unaligned write command
<6>[ 39.996055] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 00 66 93 70 00 00 20 00
<3>[ 39.996086] I/O error, dev sda, sector 6722416 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
<6>[ 40.001624] ata1: EH complete
<6>[ 40.857908] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 40.860827] ata1.00: configured for UDMA/33
<3>[ 41.427874] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x4050000 action 0xe frozen
<3>[ 41.430941] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 41.433878] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 41.436808] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 41.439620] ata1.00: cmd 60/08:08:00:08:00/00:00:00:00:00/40 tag 1 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 41.445033] ata1.00: status: { DRDY }
<6>[ 41.447806] ata1: hard resetting link
<6>[ 42.170887] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 42.173872] ata1.00: configured for UDMA/33
<6>[ 42.174100] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 42.174167] sd 0:0:0:0: [sda] tag#1 Sense Key : Illegal Request [current]
<6>[ 42.174220] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unaligned write command
<6>[ 42.174274] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 08 00 00 00 08 00
<3>[ 42.174308] I/O error, dev sda, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 42.177317] ata1: EH complete
<6>[ 43.042930] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 43.045812] ata1.00: configured for UDMA/33
<6>[ 44.354914] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 44.357725] ata1.00: configured for UDMA/33
<5>[ 44.778722] audit: type=1400 audit(1731966547.154:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=458 comm="apparmor_parser"
<5>[ 44.796516] audit: type=1400 audit(1731966547.172:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=457 comm="apparmor_parser"
<5>[ 44.813538] audit: type=1400 audit(1731966547.189:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=459 comm="apparmor_parser"
<5>[ 44.819389] audit: type=1400 audit(1731966547.194:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=462 comm="apparmor_parser"
<5>[ 44.843635] audit: type=1400 audit(1731966547.219:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=460 comm="apparmor_parser"
<5>[ 44.904931] audit: type=1400 audit(1731966547.281:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=464 comm="apparmor_parser"
<5>[ 44.921964] audit: type=1400 audit(1731966547.298:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=465 comm="apparmor_parser"
<5>[ 44.955850] audit: type=1400 audit(1731966547.331:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=463 comm="apparmor_parser"
<5>[ 44.966389] audit: type=1400 audit(1731966547.342:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=466 comm="apparmor_parser"
<5>[ 44.991257] audit: type=1400 audit(1731966547.367:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=467 comm="apparmor_parser"
<6>[ 46.533714] RTL8211B Gigabit Ethernet r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
<6>[ 46.722282] r8169 0000:01:00.0 enp1s0: Link is Down
<3>[ 46.778956] ata1.00: exception Emask 0x10 SAct 0x100000 SErr 0x4050000 action 0xe frozen
<3>[ 46.783005] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 46.786704] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 46.790356] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 46.793869] ata1.00: cmd 60/08:a0:88:ef:65/00:00:01:00:00/40 tag 20 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 46.800829] ata1.00: status: { DRDY }
<6>[ 46.804306] ata1: hard resetting link
<6>[ 47.531900] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 47.534796] ata1.00: configured for UDMA/33
<6>[ 47.534980] ata1: EH complete
<6>[ 49.020316] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control off
<6>[ 49.934906] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 49.937599] ata1.00: configured for UDMA/33
<6>[ 51.023865] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 51.026568] ata1.00: configured for UDMA/33
<6>[ 52.404842] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 52.407542] ata1.00: configured for UDMA/33
<4>[ 57.338378] kauditd_printk_skb: 110 callbacks suppressed
<5>[ 57.338397] audit: type=1400 audit(1731966559.712:122): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="rsyslogd" pid=701 comm="apparmor_parser"
<6>[ 59.597574] perf: interrupt took too long (2533 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
<3>[ 61.358359] ata1.00: exception Emask 0x10 SAct 0x4 SErr 0x4050000 action 0xe frozen
<3>[ 61.361867] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 61.365195] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 61.368560] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 61.371971] ata1.00: cmd 60/98:10:50:c4:92/00:00:01:00:00/40 tag 2 ncq dma 77824 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 61.378436] ata1.00: status: { DRDY }
<6>[ 61.381861] ata1: hard resetting link
<6>[ 62.126949] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 62.131678] ata1.00: configured for UDMA/33
<6>[ 62.132037] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 62.132167] sd 0:0:0:0: [sda] tag#2 Sense Key : Illegal Request [current]
<6>[ 62.132244] sd 0:0:0:0: [sda] tag#2 Add. Sense: Unaligned write command
<6>[ 62.132325] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 01 92 c4 50 00 00 98 00
<3>[ 62.132379] I/O error, dev sda, sector 26395728 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
<6>[ 62.139166] ata1: EH complete
<3>[ 62.633545] ata1.00: exception Emask 0x10 SAct 0x800000 SErr 0x4050000 action 0xe frozen
<3>[ 62.637129] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 62.642420] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 62.645656] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 62.648927] ata1.00: cmd 60/08:b8:78:81:68/00:00:01:00:00/40 tag 23 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 62.655921] ata1.00: status: { DRDY }
<6>[ 62.659323] ata1: hard resetting link
<6>[ 63.368990] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 63.371915] ata1.00: configured for UDMA/33
<6>[ 63.372117] sd 0:0:0:0: [sda] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 63.372186] sd 0:0:0:0: [sda] tag#23 Sense Key : Illegal Request [current]
<6>[ 63.372241] sd 0:0:0:0: [sda] tag#23 Add. Sense: Unaligned write command
<6>[ 63.372300] sd 0:0:0:0: [sda] tag#23 CDB: Read(10) 28 00 01 68 81 78 00 00 08 00
<3>[ 63.372335] I/O error, dev sda, sector 23626104 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 63.377845] ata1: EH complete
<6>[ 65.808358] loop0: detected capacity change from 0 to 8
<6>[ 67.710983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 67.714515] ata1.00: configured for UDMA/33
<5>[ 68.017089] audit: type=1400 audit(1731966570.394:123): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=925 comm="apparmor_parser"
<5>[ 68.039457] audit: type=1400 audit(1731966570.416:124): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=925 comm="apparmor_parser"
<6>[ 69.431941] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 69.436707] ata1.00: configured for UDMA/33
<6>[ 72.281980] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 72.285375] ata1.00: configured for UDMA/33
<6>[ 73.621932] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 73.626558] ata1.00: configured for UDMA/33
<3>[ 73.748966] ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x4050000 action 0xe frozen
<3>[ 73.749307] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 73.749530] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 73.749869] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 73.750072] ata1.00: cmd 60/08:30:e8:a6:a2/00:00:03:00:00/40 tag 6 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 73.750591] ata1.00: status: { DRDY }
<6>[ 73.750843] ata1: hard resetting link
<6>[ 74.455953] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 74.459947] ata1.00: configured for UDMA/33
<6>[ 74.460228] ata1: EH complete
<3>[ 74.546479] ata1.00: exception Emask 0x10 SAct 0x10000 SErr 0x4050000 action 0xe frozen
<3>[ 74.546864] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 74.547088] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 74.547297] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 74.547490] ata1.00: cmd 60/08:80:f0:a6:a2/00:00:03:00:00/40 tag 16 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 74.548048] ata1.00: status: { DRDY }
<6>[ 74.548236] ata1: hard resetting link
<6>[ 75.278063] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 75.281730] ata1.00: configured for UDMA/33
<6>[ 75.281980] ata1: EH complete
<6>[ 76.335132] perf: interrupt took too long (3203 > 3166), lowering kernel.perf_event_max_sample_rate to 62000
<6>[ 77.534947] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 77.539067] ata1.00: configured for UDMA/33
<6>[ 78.344903] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 78.351403] ata1.00: configured for UDMA/33
<6>[ 79.578841] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 79.581714] ata1.00: configured for UDMA/33
<6>[ 80.459863] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 80.462875] ata1.00: configured for UDMA/33
<6>[ 82.027868] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 82.030686] ata1.00: configured for UDMA/33
<6>[ 83.068858] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 83.071828] ata1.00: configured for UDMA/33
<7>[ 84.815847] systemd-journald[180]: /var/log/journal/5417a49cea5840e88754911a4faa584b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 85.618861] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 85.621689] ata1.00: configured for UDMA/33
<3>[ 85.708184] ata1.00: exception Emask 0x10 SAct 0x807fffff SErr 0x4050000 action 0xe frozen
<3>[ 85.708508] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 85.708717] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 85.709002] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.709141] ata1.00: cmd 61/08:00:00:a0:0d/00:00:02:00:00/40 tag 0 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.709460] ata1.00: status: { DRDY }
<3>[ 85.709563] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.709692] ata1.00: cmd 61/08:08:68:a0:0d/00:00:02:00:00/40 tag 1 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.710109] ata1.00: status: { DRDY }
<3>[ 85.710216] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.710341] ata1.00: cmd 61/08:10:78:a0:0d/00:00:02:00:00/40 tag 2 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.710657] ata1.00: status: { DRDY }
<3>[ 85.710945] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.711134] ata1.00: cmd 61/08:18:98:a0:0d/00:00:02:00:00/40 tag 3 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.711512] ata1.00: status: { DRDY }
<3>[ 85.713964] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.716409] ata1.00: cmd 61/08:20:a8:a0:0d/00:00:02:00:00/40 tag 4 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.721307] ata1.00: status: { DRDY }
<3>[ 85.723723] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.726627] ata1.00: cmd 61/08:28:c0:a0:0d/00:00:02:00:00/40 tag 5 ncq dma 4096 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.732865] ata1.00: status: { DRDY }
<3>[ 85.735633] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.738070] ata1.00: cmd 61/08:30:e0:a0:0d/00:00:02:00:00/40 tag 6 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.742954] ata1.00: status: { DRDY }
<3>[ 85.745329] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.747722] ata1.00: cmd 61/08:38:00:a1:0d/00:00:02:00:00/40 tag 7 ncq dma 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.752643] ata1.00: status: { DRDY }
<3>[ 85.755079] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.757477] ata1.00: cmd 61/08:40:18:a1:0d/00:00:02:00:00/40 tag 8 ncq dma 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.762221] ata1.00: status: { DRDY }
<3>[ 85.764604] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.767050] ata1.00: cmd 61/08:48:48:a1:0d/00:00:02:00:00/40 tag 9 ncq dma 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.772026] ata1.00: status: { DRDY }
<3>[ 85.774454] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.776914] ata1.00: cmd 61/08:50:70:a1:0d/00:00:02:00:00/40 tag 10 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.781721] ata1.00: status: { DRDY }
<3>[ 85.784298] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.786706] ata1.00: cmd 61/10:58:d8:a1:0d/00:00:02:00:00/40 tag 11 ncq dma 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.792159] ata1.00: status: { DRDY }
<3>[ 85.794579] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.797033] ata1.00: cmd 61/08:60:18:a2:0d/00:00:02:00:00/40 tag 12 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.801880] ata1.00: status: { DRDY }
<3>[ 85.804284] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.806699] ata1.00: cmd 61/08:68:30:a2:0d/00:00:02:00:00/40 tag 13 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.811555] ata1.00: status: { DRDY }
<3>[ 85.813999] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.816393] ata1.00: cmd 61/08:70:48:a2:0d/00:00:02:00:00/40 tag 14 ncq dma 4096 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.821111] ata1.00: status: { DRDY }
<3>[ 85.823495] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.825880] ata1.00: cmd 61/08:78:68:a2:0d/00:00:02:00:00/40 tag 15 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.830639] ata1.00: status: { DRDY }
<3>[ 85.833023] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.835554] ata1.00: cmd 61/08:80:80:a2:0d/00:00:02:00:00/40 tag 16 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.840979] ata1.00: status: { DRDY }
<3>[ 85.843334] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.845719] ata1.00: cmd 61/08:88:98:a2:0d/00:00:02:00:00/40 tag 17 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.850548] ata1.00: status: { DRDY }
<3>[ 85.852944] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.855330] ata1.00: cmd 61/08:90:d8:a2:0d/00:00:02:00:00/40 tag 18 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.860060] ata1.00: status: { DRDY }
<3>[ 85.862434] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.864866] ata1.00: cmd 61/08:98:f8:a2:0d/00:00:02:00:00/40 tag 19 ncq dma 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.869602] ata1.00: status: { DRDY }
<3>[ 85.871973] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.874388] ata1.00: cmd 61/08:a0:18:a3:0d/00:00:02:00:00/40 tag 20 ncq dma 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.879147] ata1.00: status: { DRDY }
<3>[ 85.881517] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.883945] ata1.00: cmd 61/08:a8:48:a3:0d/00:00:02:00:00/40 tag 21 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.888678] ata1.00: status: { DRDY }
<3>[ 85.891062] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.893460] ata1.00: cmd 61/10:b0:78:a3:0d/00:00:02:00:00/40 tag 22 ncq dma 8192 out
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.898243] ata1.00: status: { DRDY }
<3>[ 85.900609] ata1.00: failed command: WRITE FPDMA QUEUED
<3>[ 85.903033] ata1.00: cmd 61/08:f8:00:e0:19/00:00:02:00:00/40 tag 31 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 85.907812] ata1.00: status: { DRDY }
<6>[ 85.910171] ata1: hard resetting link
<6>[ 86.635834] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 86.639548] ata1.00: configured for UDMA/33
<6>[ 86.640440] ata1: EH complete
<3>[ 86.853872] ata1.00: exception Emask 0x10 SAct 0x200 SErr 0x4050000 action 0xe frozen
<3>[ 86.856437] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 86.858983] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 86.861826] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 86.864287] ata1.00: cmd 60/08:48:10:c8:a5/00:00:03:00:00/40 tag 9 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 86.869178] ata1.00: status: { DRDY }
<6>[ 86.871919] ata1: hard resetting link
<6>[ 87.595834] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 87.598661] ata1.00: configured for UDMA/33
<6>[ 87.598971] sd 0:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 87.599063] sd 0:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current]
<6>[ 87.599144] sd 0:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
<6>[ 87.599231] sd 0:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 03 a5 c8 10 00 00 08 00
<3>[ 87.599281] I/O error, dev sda, sector 61196304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 87.604345] ata1: EH complete
<3>[ 89.511958] ata1.00: exception Emask 0x10 SAct 0x200 SErr 0x4050000 action 0xe frozen
<3>[ 89.514585] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 89.517242] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 89.519968] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 89.522509] ata1.00: cmd 60/08:48:18:a1:a2/00:00:07:00:00/40 tag 9 ncq dma 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 89.527637] ata1.00: status: { DRDY }
<6>[ 89.530209] ata1: hard resetting link
<6>[ 90.258867] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 90.261818] ata1.00: configured for UDMA/33
<6>[ 90.262013] ata1: EH complete
<3>[ 94.589862] ata1.00: exception Emask 0x10 SAct 0x800 SErr 0x4050000 action 0xe frozen
<3>[ 94.592490] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 94.595060] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 94.598079] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 94.600586] ata1.00: cmd 60/08:58:88:68:6a/00:00:01:00:00/40 tag 11 ncq dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 94.605940] ata1.00: status: { DRDY }
<6>[ 94.608519] ata1: hard resetting link
<6>[ 95.330876] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 95.334027] ata1.00: configured for UDMA/33
<6>[ 95.334227] sd 0:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 95.334292] sd 0:0:0:0: [sda] tag#11 Sense Key : Illegal Request [current]
<6>[ 95.334345] sd 0:0:0:0: [sda] tag#11 Add. Sense: Unaligned write command
<6>[ 95.334401] sd 0:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 01 6a 68 88 00 00 08 00
<3>[ 95.334435] I/O error, dev sda, sector 23750792 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
<6>[ 95.339655] ata1: EH complete
<6>[ 97.346875] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 97.349699] ata1.00: configured for UDMA/33
<6>[ 98.787878] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 98.791090] ata1.00: configured for UDMA/33
<6>[ 100.874879] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 100.878236] ata1.00: configured for UDMA/33
<6>[ 103.994877] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 103.997819] ata1.00: configured for UDMA/33
<6>[ 108.654857] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 108.660382] ata1.00: configured for UDMA/33
<6>[ 110.066905] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 110.070146] ata1.00: configured for UDMA/33
<6>[ 111.181866] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 111.185090] ata1.00: configured for UDMA/33
<3>[ 111.793855] ata1.00: exception Emask 0x10 SAct 0x10000000 SErr 0x4050000 action 0xe frozen
<3>[ 111.796595] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 111.799292] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 111.802171] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 111.805118] ata1.00: cmd 60/40:e0:c0:9f:21/00:00:00:00:00/40 tag 28 ncq dma 32768 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 111.810681] ata1.00: status: { DRDY }
<6>[ 111.813471] ata1: hard resetting link
<6>[ 112.538862] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 112.541798] ata1.00: configured for UDMA/33
<6>[ 112.542009] sd 0:0:0:0: [sda] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
<6>[ 112.542074] sd 0:0:0:0: [sda] tag#28 Sense Key : Illegal Request [current]
<6>[ 112.542127] sd 0:0:0:0: [sda] tag#28 Add. Sense: Unaligned write command
<6>[ 112.542183] sd 0:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 00 21 9f c0 00 00 40 00
<3>[ 112.542217] I/O error, dev sda, sector 2203584 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0
<6>[ 112.547645] ata1: EH complete
<3>[ 113.349902] ata1.00: exception Emask 0x10 SAct 0x40 SErr 0x4050000 action 0xe frozen
<3>[ 113.352723] ata1.00: irq_stat 0x00000040, connection status changed
<3>[ 113.355923] ata1: SError: { PHYRdyChg CommWake DevExch }
<3>[ 113.358631] ata1.00: failed command: READ FPDMA QUEUED
<3>[ 113.361617] ata1.00: cmd 60/08:30:98:a6:a2/00:00:03:00:00/40 tag 6 ncq dma 4096 in
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
<3>[ 113.366927] ata1.00: status: { DRDY }
<6>[ 113.369952] ata1: hard resetting link
<6>[ 114.098867] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 114.102025] ata1.00: configured for UDMA/33
<6>[ 114.102198] ata1: EH complete
<6>[ 116.122862] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 116.125893] ata1.00: configured for UDMA/33
<6>[ 118.476902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 118.489121] ata1.00: configured for UDMA/33
<6>[ 123.165058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
<6>[ 123.169485] ata1.00: configured for UDMA/33